Skip to main content
Unsupported Browser Detected

Internet Explorer lacks support for the features of this website. For the best experience, please use a modern browser such as Chrome, Firefox, or Edge.

IB 20-56 NMFS Reallocates Pacific Cod from Vessels Using Jig Gear and Catcher Vessels Greater Than or Equal to 60 feet Using Hook-And-Line Gear to Catcher Vessels Less Than 60 Feet Length Overall Using Hook-And-Line or Pot Gear in the BSAI

August 17, 2020 - 04:30 p.m.

Notice of a fishery management action

The National Marine Fisheries Service (NMFS) is reallocating 1,100 metric tons of Pacific cod from vessels using jig gear and 274 metric tons of Pacific cod from catcher vessels greater than or equal to 60 feet using hook-and-line gear to the annual amount specified for catcher vessels less than 60 feet (18.3 meters) length overall (LOA) using hook-and-line or pot gear in the Bering Sea and Aleutian Islands management area according to James W. Balsiger, Administrator, Alaska Region, NMFS.

 

The following table summarizes the reallocation in metric tons:

PACIFIC COD CURRENT SHARE THIS ACTION REVISED SHARE
Jig Gear 1,278    - 1,100 178

Catcher Vessels >=60 ft.

Using Hook-and-Line Gear
277 -274 3

Catcher Vessels < 60 Feet

LOA Using Hook-and-line or Pot Gear
3,433 + 1,374 4,807

 

This action is necessary to allow the 2020 total allowable catch of Pacific cod to be harvested and is issued pursuant to 50 CFR 679.20(a)(7)(iii)(A) and 50 CFR 679.20(a)(7)(iv)(C). This action does not imply any change in the status of the fisheries.

 

This information bulletin only provides notice of a fishery management action. For the purposes of complying with the requirements of this action, you are advised to see the actual text of the action in the Federal Register.

Last updated by Alaska Regional Office on October 07, 2020