Hyperspectral Imagery for the Main Eight Hawaiian Islands:Oahu (204c-0613-332211)

This project is a cooperative effort among the National Ocean Service, National Centers for Coastal Ocean Science, Center for Coastal Monitoring and Assessment; the University of Hawaii; and Analytical Laboratories of Hawaii, LLC. The goal of the work was to develop coral reef mapping methods and compare benthic habitat maps generated by photointerpreting georeferenced color aerial photography, hyperspectral and IKONOS satellite imagery. The enhanced spectral resolution of hyperspectral and control of bandwidths of multispectral data yield an advantage over color aerial photography particularly when coral health and time series analysis of coral reef community structure are of interest. Depending on the type of instrument, a spectral imaging system can be utilized to see multiple colors from ultraviolet through the far infrared range. The AURORA hyperspectral imaging system collected 72 ten nm bands in the visible and near infrared spectral range with a 3 meter pixel resolution. The data was processed to select band widths, which optimized feature detection in shallow and deep water. Photointerpreters can accurately and reliably delineate boundaries of features in the imagery as they appear on the computer monitor using a software interface such as the Habitat Digitizer.

The National Ocean Service is conducting research to digitally map biotic resources and coordinate a long-term monitoring program that can detect and predict change in U.S. coral reefs, and their associated habitats and biological communities.

480

The National Oceanic and Atmospheric Administration (NOAA) National Centers for Coastal Ocean Science(NCCOS) produced this data CD-ROM. NCCOS Biogeography Program does not guarantee the accuracy of the geographic features or attributes.

A flightline containing hyperspectral imagery will have two separate image files representing a subset of 6 bands from the 72 original bands collected. File naming convention is as follows 'flightline number-date(s) acquired-hyperspectral or airphoto imagery'. Hyperspectral flightline files will end in either 272217 or 332211 representing the band number in the respective file. Band numbers equate to the following spectral wavelength in nanometers: 27 - 605.51991, 22 - 556.918030, 17 - 508.319000, 33 - 663.835022, and 11 - 450.001007. These approximate true-color band combinations were chosen to highlight shallow (272217) and deep (332211) water benthic features. Note that the resolution of the georeferenced imagery has been degraded significantly to reduce file size and facilitate internet viewing.;

None

None

Microsoft Windows 2000 Version 5.0(Build 2195) Service Pack 3; ESRI ArcCatalog 8.2.0.700

The hyperspectral imagery were obtained at a 3 meter pixel resolution

Habitat delineations could be made accurately in water depths up to 30 meters. Band combinations were selected which optimized benthic habitat information in shallow and deep water and the scenes were converted into RGB composites. The shallow band IDs and centers were configured as: 1) Band 17 at 508.319 nm 2) Band 22 at 547.918 nm 3) Band 27 at 605.516 nm The deep band IDs and centers were configured as: 1) Band 11 at 450.001 nm 2) Band 22 at 547.918 nm 3) Band 33 at 663.835 nm

All habitat delineations were completed by a photointerpreter on data that had been processed only to maximize specific band widths for viewing data at varying depths.