2015 OLC Lidar DEM: Okanogan, WA

Quantum Spatial has collected Light Detection and Ranging (LiDAR) data for the Oregon LiDAR Consortium (OLC) Okanogan FEMA study area. This study area is located in northern Washington.

The collection of high resolution geographic data is part of an ongoing pursuit to amass a library of information accessible to government agencies as well as the general public. In June 2015 QSI employed remote-sensing lasers in order to obtain a total area flown of 263,839 acres. Settings for LiDAR data capture produced an average resolution of at least eight pulses per square meter.

Final products created include RGB extracted (from NAIP imagery) LiDAR point cloud data, one-meter digital elevation models of highest hit and bare earth ground models, one-meter density rasters, one-half-meter intensity rasters, study area vector shapes, and corresponding statistical data. Final deliverables are projected in UTM Zone 11. This metadata was created for the bare earth digital elevation models.

Original contact information:

Contact Name: Jacob Edwards

Contact Org: DOGAMI

Phone: 971-673-1557

Email: jacob.edwards@oregon.gov

Provide high resolution terrain elevation data.

12064

Any conclusions drawn from the analysis of this information are not the responsibility of the Oregon Department of Geology and Mineral Industries (DOGAMI), FEMA, the Office for Coastal Management or its partners.

This data can be obtained on-line at the following URL: https://coast.noaa.gov/dataviewer

;

None

Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no

longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its

limitations.

unknown

Vertical Accuracy reporting is designed to meet guidelines presented in the National Standard for Spatial Data Accuracy (NSSDA) (FGDC, 1998) and the ASPRS Guidelines for Vertical Accuracy Reporting for LiDAR Data V1.0 (ASPRS, 2004). The statistical model compares known ground survey points (GSPs) to the closest laser point. Vertical accuracy statistical analysis uses ground survey points in open areas where the LiDAR system has a "very high probability" that the sensor will measure the ground surface and reports the fundamental vertical accuracy value (FVA=1.96*RMSE).

For the OLC Okanogan FEMA study area, a total of 2,673 GSPs were collected. An additional 197 reserved ground survey points were collected for independent verification, resulting in a fundamental vertical accuracy (FVA) of 0.083 meters.

For more information about the vertical accuracy, please refer to the final report, listed above in the Supplemental_Information field

of this metadata record.

; Quantitative Value: 0.083 meters, Test that produced the value: Tested to meet FVA at a 95 percent confidence level in meters.

LiDAR data has been collected and processed for all areas within the project study area.

Upon receipt from vendor (Quantum Spatial), all LiDAR data was independently reviewed by staff from the Oregon Department of Geology and Mineral Industries (DOGAMI) to ensure project specifications were met. All data were inventoried for completeness and data were checked for quality, which included examining LiDAR data for errors associated with internal data consistency, model quality, and accuracy.