49667 fdem2007_clay_putnam_m537_metadata Data Set Published / External 49401 Lidar - partner (no harvest) Project Completed 2008 This Light Detection and Ranging (LiDAR) LAS dataset is a topographic survey conducted for a coalition of GIS practitioners, including the Florida Division of Emergency Management (FDEM), Florida Water Management Districts, Florida Fish and Wildlife Conservation Commission, Florida Department of Environmental Protection, Army Corps of Engineers Jacksonville District, and other state and federal agencies. The goal for this project is to use the LiDAR data as new elevation inputs for updated SLOSH data grids. The ultimate result is the update of the Regional Hurricane Evacuation Studies (RHES) for the state. The State of Florida Division of Emergency Management LiDAR Survey was collected under the guidance of a Professional Mapper/Surveyor. Data were collected for 416 square miles in the eastern portions of Clay and Putnam Counties, Florida from August 18 - September 4, 2007. This is a classified lidar data set. The data are classified: 1 = Unclassified, 2 = Ground (Bare Earth), 7 = Noise and 9 = Water. The FDEM Baseline Specifications required a maximum post spacing of 4 feet, however, the PDS (Program and Data Solutions) team required a much higher point density of its subcontractors in order to increase the probability of penetrating dense foliage during the mandated summer acquisition; with nominal post spacing of 0.7 meters per flight line and 50% sidelap between flight lines, the average point density is 4 points per square meter. Original contact information: Contact Org: Florida DEM Phone: 850-413-9907 Email: gis@dca.state.fl.us The LiDAR topographic mapping survey is to support the Florida Division of Emergency Management (FDEM) development and maintenance of Regional Hurricane Evacuations Studies (RHES), which include vulnerability assessments, and to assist disaster response personnel in understanding the threats to Florida's citizens and visitors. Additional intended uses for this survey are growth management, map modernization/floodplain mapping, natural lands stewardship, and homeland security planning. 10311 A complete description of this dataset is available in the Minimum Technical Standard (MTS report) "Final Report of Specific Purpose LiDAR Survey - LiDAR-Generated Breaklines and Contours" submitted to Florida Division of Emergency Management. This report may be accessed at: https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/537/supplemental/Survey_Report_for_Clay-Putnam_Counties_FL.pdf A footprint of this data set may be viewed in Google Earth at: https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/537/supplemental/FDEM_Lidar_Clay_and_Putnam_Counties.kmz Theme ISO 19115 Topic Category elevation Office for Coastal Management Charleston SC Data Set As Needed Any conclusions drawn from the analysis of this information are not the responsibility of NOAA, the Office for Coastal Management or its partners. 50211 LAS Published / External Completed Lidar point cloud LAS 1.1 format | Description Source: "Florida GIS - Baseline Specifications for Orthophotography and LiDAR v1.2" Converted from FGDC using 'fgdc_to_inport_xml_entity.pl' script. Data Steward 2008 Organization NOAA Office for Coastal Management NOAA/OCM coastal.info@noaa.gov 2234 South Hobson Ave Charleston SC 29405-2413 (843) 740-1202 https://coast.noaa.gov NOAA Office for Coastal Management Home Page Online Resource Distributor 2008 Organization NOAA Office for Coastal Management NOAA/OCM coastal.info@noaa.gov 2234 South Hobson Ave Charleston SC 29405-2413 (843) 740-1202 https://coast.noaa.gov NOAA Office for Coastal Management Home Page Online Resource Metadata Contact 2008 Organization NOAA Office for Coastal Management NOAA/OCM coastal.info@noaa.gov 2234 South Hobson Ave Charleston SC 29405-2413 (843) 740-1202 https://coast.noaa.gov NOAA Office for Coastal Management Home Page Online Resource Point of Contact 2008 Organization NOAA Office for Coastal Management NOAA/OCM coastal.info@noaa.gov 2234 South Hobson Ave Charleston SC 29405-2413 (843) 740-1202 https://coast.noaa.gov NOAA Office for Coastal Management Home Page Online Resource Ground Condition -81.905005 -81.427505 30.204658 29.338558 Range 2007-08-18 2007-09-04 Yes Unclassified This data can be obtained on-line at the following URL: https://coast.noaa.gov/dataviewer; None Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations. https://coast.noaa.gov/dataviewer/#/lidar/search/where:ID=537 Customized Download Create custom data files by choosing data area, product type, map projection, file format, datum, etc. https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/537/index.html Bulk Download Simple download of data files. https://coast.noaa.gov Online Resource https://coast.noaa.gov/dataviewer Online Resource 2016-05-23 Date that the source FGDC record was last modified. 2017-11-14 Converted from FGDC Content Standards for Digital Geospatial Metadata (version FGDC-STD-001-1998) using 'fgdc_to_inport_xml.pl' script. Contact Tyler Christensen (NOS) for details. 2018-02-08 Partial upload of Positional Accuracy fields only. 2018-03-13 Partial upload to move data access links to Distribution Info. Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 2; ESRI ArcCatalog 9.3.1.1850 Lidar source compiled to meet 1m horizontal accuracy.; Quantitative Value: 1 meters, Test that produced the value: The PDS team does not perform independent horizontal accuracy testing on the LiDAR. LiDAR vendors perform calibrations on the LiDAR sensor and compare data to adjoining flight lines to ensure LiDAR meets the 1 meter horizontal accuracy standard at the 95% confidence level. The LiDAR is required to meet 0.183 m (0.60 ft) Fundamental Vertical Accuracy (FVA) and 0.363 m (1.19 ft) Consolidated Vertical Accuracy (CVA). ; Quantitative Value: 0.167 meters, Test that produced the value: Based on the vertical accuracy testing conducted by PDS, using NSSDA and FEMA guidelines, vertical accuracy at the 95% confidence level (called Accuracyz) is computed by the formula RMSEz x 1.9600. The data set for Clay-Putnam Counties, Florida satisfies the criteria: Countywide lidar dataset tested 0.167 m (0.55 ft) vertical accuracy at 95% confidence level in open terrain, based on open terrain RMSEz 0.0853 m (0.28 ft) x 1.9600. Countywide lidar dataset tested 0.265 m (0.90 ft) vertical accuracy at 95% confidence level in all land cover categories combined, based on consolidated RMSEz 0.14 m (0.46 ft) x 1.9600. A visual qualitative assessment was performed to ensure the data completeness against the intensity images derived from Lidar points. No void or missing data. Data covers the tile scheme provided for the county. Lidar 2007-01-01 Range 2007-09-06 2008-02-11 LiDAR dataset was used to create intensity stereopairs for 3D breakline compilation and for contour generation. | Source Geospatial Form: vector digital data | Type of Source Media: online 1 The ABGPS, IMU, and raw Optech 3100ea LiDAR scans are integrated using Optech Incorporated's DASHMap, version 1.1 software, Terrascan software and Microstation software. The resultant file is in a LAS binary file format. The LAS file version 1.1 format can be easily transferred from one file format to another. It is a binary file format that maintains information specific to the LiDAR data (return#, intensity value, xyz, etc.). The resultant points are referenced to the NAD83 horizontal datum and GRS80 vertical datum. The date and time for each flight line can be determined using the Julian date and time. The Julian date is a continuous count of days and fractions since noon Universal Time on January 1, 4713 BCE on the Julian calendar. 2008-01-01T00:00:00 2 The unedited data are classified to facilitate the application of the appropriate feature extraction filters. A combination of proprietary filters are applied as appropriate for the production of bare earth digital terrain models (dtms). Interactive editing methods are applied to those areas where it is inappropriate or impossible to use the feature extraction filters, based upon the design criteria and/or limitations of the relevant filters. These same feature extraction filters are used to produce elevation height surfaces. The LiDAR mass points were delivered in American Society for Photogrammetry and Remote Sensing LAS 1.1 format. The header file for each dataset is complete as define by the LAS 1.1 specification. In addition the following fields are included (Precision reported in brackets): Class (Integer); GPS Week Time (0.0001 seconds); Easting (0.01 meter); Northing (0.01 meter); Elevation (0.01 meter); Echo Number (Integer 1 to 4); Echo (Integer 1 to 4); Intensity (8 Bit Integer); Flightline (Integer); Scan Angle (Integer Degree). The LAS files do not include overlap. The data was classified as follows: Class 1 = Unclassified. This class includes vegetation, buildings, noise etc. Class 2 = Ground (Bare Earth) Class 7 = Noise Class 9 = Water 2008-01-01T00:00:00 3 The NOAA Office for Coastal Management (OCM) received files in LAS format. The files contained LiDAR intensity and elevation measurements. OCM performed the following processing on the data to make it available within Digital Coast: 1. The data were converted from State Plane Florida East coordinates to geographic coordinates. 2. The data were converted from NAVD88 heights to ellipsoid heights using Geoid03. 3. The LAS header fields were sorted by latitude and updated. 2010-06-01T00:00:00 50211 Entity gov.noaa.nmfs.inport:49667 Anne Ball 2017-11-15T15:21:31 SysAdmin InPortAdmin 2022-08-09T17:11:37 2022-03-16 OCM Partners OCMP 1002 Public No No 2022-03-16 1 Year 2023-03-16