gov.noaa.nmfs.inport:49814 eng UTF8 dataset OCM Partners resourceProvider NOAA Office for Coastal Management (843) 740-1202 2234 South Hobson Ave Charleston SC 29405-2413 coastal.info@noaa.gov https://coast.noaa.gov WWW:LINK-1.0-http--link NOAA Office for Coastal Management Website NOAA Office for Coastal Management Home Page information pointOfContact 2026-04-30T00:00:00 ISO 19115-2 Geographic Information - Metadata Part 2 Extensions for imagery and gridded data ISO 19115-2:2009(E) 2004 Harrison County, Mississippi Lidar Mapping ms2004_m39_metadata 2006-11-09 publication NOAA/NMFS/EDM 49814 https://www.fisheries.noaa.gov/inport/item/49814 WWW:LINK-1.0-http--link Full Metadata Record View the complete metadata record on InPort for more information about this dataset. information https://coast.noaa.gov WWW:LINK-1.0-http--link Citation URL Online Resource download https://coast.noaa.gov/dataviewer WWW:LINK-1.0-http--link Citation URL Online Resource download This metadata record describes the topographic mapping of Harrison County, Mississippi in March of 2004. Products generated include lidar point clouds in .LAS format and lidar bare-earth elevation models in .LAS format using lidar collected with a Leica ALS-40 Aerial Lidar Sensor. Original contact information: Contact Org: NOAA Office for Coastal Management Phone: 843-740-1202 Email: coastal.info@noaa.gov The mission of the Center is to support the environmental, social, and economic well being of the coast by linking people, information, and technology. The data produced from this SOW are intended to support the local Coastal Zone Managers in their decision-making processes. This data will be used for flood plain mapping and other coastal management applications. completed NOAA Office for Coastal Management (843) 740-1202 2234 South Hobson Ave Charleston SC 29405-2413 coastal.info@noaa.gov https://coast.noaa.gov WWW:LINK-1.0-http--link NOAA Office for Coastal Management Website NOAA Office for Coastal Management Home Page information pointOfContact NOAA Office for Coastal Management (843) 740-1202 2234 South Hobson Ave Charleston SC 29405-2413 coastal.info@noaa.gov https://coast.noaa.gov WWW:LINK-1.0-http--link NOAA Office for Coastal Management Website NOAA Office for Coastal Management Home Page information custodian notPlanned Bathymetry/Topography Digital Elevation Model (DEM) Digital Terrain Model (DTM) Elevation and Derived Products Lidar Lidar Point Cloud Surface Model Terrain Model theme EDI Thesaurus Harrison County Mississippi US place Geographic Names Information System Lidar - partner (no harvest) project InPort otherRestrictions Cite As: OCM Partners, [Date of Access]: 2004 Harrison County, Mississippi Lidar Mapping [Data Date Range], https://www.fisheries.noaa.gov/inport/item/49814. NOAA provides no warranty, nor accepts any liability occurring from any incomplete, incorrect, or misleading data, or from any incorrect, incomplete, or misleading use of the data. It is the responsibility of the user to determine whether or not the data is suitable for the intended purpose. otherRestrictions Access Constraints: None otherRestrictions Use Constraints: Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations. otherRestrictions Distribution Liability: Any conclusions drawn from the analysis of this information are not the responsibility of NOAA, the OCM, or its partners. unclassified vector eng; US elevation -89.39 -88.81 30.28 30.71 | Currentness: Ground Condition 2004-03-08 2004-03-09 The Harrison County, MS LiDAR Quality Control Report may be viewed at: https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/39/supplemental/index.html NOAA Office for Coastal Management (843) 740-1202 2234 South Hobson Ave Charleston SC 29405-2413 coastal.info@noaa.gov https://coast.noaa.gov WWW:LINK-1.0-http--link NOAA Office for Coastal Management Website NOAA Office for Coastal Management Home Page information distributor https://coast.noaa.gov/dataviewer/#/lidar/search/where:ID=39 WWW:LINK-1.0-http--link Customized Download Create custom data files by choosing data area, product type, map projection, file format, datum, etc. download https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/39/index.html WWW:LINK-1.0-http--link Bulk Download Simple download of data files. download dataset Accuracy 1. Lidar data was collected and processed in accordance with FEMA guidance as published in Appendix A, February, 2002. 2. Lidar data at the interface between the land and ocean was collected (when possible) during periods when tides were predicted to be below mean lower low water. 3. Lidar data accuracy is in accordance with the National Standard for Spatial Data Accuracy (NSSDA). When compared to GPS survey grade points in generally flat non-vegetated areas, at least 95% of the positions have an error less than or equal to 36.3 cm (equivalent to root mean square error of 18.5 cm if errors were normally distributed). Horizontal Positional Accuracy The lidar data fully comply with FEMA guidance as published in Appendix A, February, 2002. Vertical Positional Accuracy The lidar data fully comply with FEMA guidance as published in Appendix A, February, 2002 and National Standard for Spatial Accuracy (NSSDA). When compared to GPS survey grade points in generally flat non-vegetated areas, at least 95% of the positions have an error less than or equal to 36.3 cm (equivalent to root mean square error of 18.5 cm if errors were normally distributed). Completeness Measure Cloud Cover: 0 Completeness Report 1. EarthData's proprietary software, Checkedb, for verification against ground survey points. 2. Terrascan, for verification of automated and manual editing and final QC of products. Conceptual Consistency Compliance with the accuracy standard was ensured by the placement of GPS ground control prior to the acquisition of lidar data. The following checks were performed. 1. The ground control and airborne GPS data stream were validated through a fully analytical boresight adjustment. 2. The DTM (Digital Terrain Model) data were checked against the project control. 3. Lidar elevation data was validated through an inspection of edge matching and visual inspection for quality (artifact removal). EarthData has developed a unique method for processing lidar data to identify and remove elevation points falling on vegetation, buildings, and other aboveground structures. The algorithms for filtering data were utilized within EarthData's proprietary software and commercial software written by TerraSolid. This software suite of tools provides efficient processing for small to large-scale, projects and has been incorporated into ISO 9001compliant production work flows. The following is a step-by-step breakdown of the process. 1. Using the lidar data set provided by EarthData, the technician performs calibrations on the data set. 2. Using the lidar data set provided by EarthData, the technician performed a visual inspection of the data to verify that the flight lines overlap correctly. The technician also verified that there were no voids, and that the data covered the project limits. The technician then selected a series of areas from the data set and inspected them where adjacent flight lines overlapped. These overlapping areas were merged and a process which utilizes 3-D Analyst and EarthData's proprietary software was run to detect and color code the differences in these plots and located the areas that contained systematic errors or distortions that were introduced by the lidar sensor. 3. Systematic distortions highlighted in step 2 were removed and the data was re-inspected. Corrections and adjustments can involve the application of angular deflection or compensation for curvature of the ground surface that can be introduced by crossing from one type of land cover to another. 4. The lidar data for each flight line was trimmed in batch for the removal of the overlap areas between flight lines. The data was checked against a control network to ensure that vertical requirements were maintained. Conversion to the client-specified datum and projections were then completed. The lidar flight line data sets were then segmented into adjoining tiles for batch processing and data management. 5. The initial batch-processing run removed 95% of points falling on vegetation. The algorithm also removed the points that fell on the edge of hard features such as structures, elevated roadways and bridges. 6. The operator interactively processed the data using lidar editing tools. During this final phase the operator generated a TIN based on a desired thematic layer to evaluate the automated classification performed in step 5. This allowed the operator to quickly re-classify points from one layer to another and recreate the TIN surface to see the effects of edits. Geo-referenced images were toggled on or off to aid the operator in identifying problem areas. The data was also examined with an automated profiling tool to aid the operator in the reclassification. 6. The final DEM was written to an ESRI grid format (.flt). 7. The point cloud data were also delivered in LAS format. 8. Project data was clipped to a 500-meter buffer outside of the official project boundary. 2005-07-28T00:00:00 The NOAA Office for Coastal Management (OCM) received LAS files containing the bared-earth elevation and intensity data from URS. OCM performed the following processing on the data to make it available within the Lidar Data Retrieval Tool (LDART): 1. The data were projected from MS State Plane coordinates to geographic decimal degrees using the General Cartographic Transformation Package. 2. The data were sorted based on latitude. 2006-11-01T00:00:00 For data management purposes, the Office for Coastal Management converted the data from NAVD88 elevations to ellipsoid elevations using Geoid 03. 2008-01-01T00:00:00 Source Contribution: EarthData Aviation. was contracted by EarthData International to collect ALS-40 Lidar data over Harrison County, Mississippi. The project site was flown on March 8th and 9th 2004 using a Horizons, Inc. aircraft with tail number N97HC. Lidar data was captured using an ALS-40 Lidar system, including an inertial measuring unit (IMU) and a dual frequency GPS receiver. Lidar was obtained at an altitude of 11,100 feet above mean terrain, at an average airspeed of 120 knots. Sensor pulse rate was set at 20 kHz with a field of view of 45 degrees and a rate of 11.0 Hz. Average swath width of the collected raw lines is 9,112.7 feet. Point spacing was 5 meters. Lidar data was recorded in conjunction with airborne GPS and IMU; the stationary GPS receiver was positioned over a control point located at the Gulfport airport. Recorded digital data was shipped via external hard drive to the production facility for processing. During airborne data collection, an additional 46 GPS control points were established throughout the airport. During the data acquisition, the receivers collected phase data at an epoch rate of 1 Hz. All GPS phase data was post processed with continuous kinematic survey techniques using "On the Fly" (OTF) integer ambiguity resolution. The GPS data was processed with forward and reverse processing algorithms. The results from each process, using the data collected at the airport, were combined to yield a single fixed integer phase differential solution of the aircraft trajectory. | Source Geospatial Form: Model | Type of Source Media: Firewire Drive Harrison County, Mississippi, Lidar Acquisition Report 2005-07-28 publication 2004-03-08 2004-03-09 Source Contribution: Waggoner Engineering in contract to EarthData International established at total of 9 survey points within Harrison County, MS. | Source Geospatial Form: Diagram | Type of Source Media: Electronic mail system Report of Survey -Harrison County, Mississippi 2005-01-27 publication 2005-01-24