Data Management Plan
GUID: gov.noaa.nmfs.inport:49882 | Published / External
Data Management Plan
DMP Template v2.0.1 (2015-01-01)
Please provide the following information, and submit to the NOAA DM Plan Repository.Reference to Master DM Plan (if applicable)
As stated in Section IV, Requirement 1.3, DM Plans may be hierarchical. If this DM Plan inherits provisions from a higher-level DM Plan already submitted to the Repository, then this more-specific Plan only needs to provide information that differs from what was provided in the Master DM Plan.
1. General Description of Data to be Managed
The spring 2007 LiDAR Flight Acquisition required the collection of approximately 526 square miles of Niagara County
and approximately 30 square miles of the corridors of Erie County. Total, approximately 555 square miles were collected
at a nominal point spacing of 1.4 meters and based on the Sanborn FEMA compliant LiDAR product specification.
The lidar data was collected from Jan 3 2007-May 9 2007. Multiple returns were recorded for each laser
pulse along with an intensity value for each return. The lidar points in this data set are the last return data, it is not a
bare earth data set and the points have not been classified.
LIDAR data is remotely sensed high-resolution elevation data collected by an airborne collection platform.
Using a combination of laser range finding, GPS positioning and inertial measurement technologies; LIDAR instruments
are able to make highly detailed Digital Elevation Models (DEM) of the earth's terrain, man-made structures and vegetation.
This data was collected at a resolution to aid in coastal management decisions including flood plain analysis and mapping.
Original contact information:
Contact Name: Jamie Young
Contact Org: Sanborn Mapping Company, Inc.
Title: General Manager
Phone: (719) 264-5602
Email: jyoung@sanborn.com
Notes: Only a maximum of 4000 characters will be included.
Notes: Data collection is considered ongoing if a time frame of type "Continuous" exists.
Notes: All time frames from all extent groups are included.
Notes: All geographic areas from all extent groups are included.
(e.g., digital numeric data, imagery, photographs, video, audio, database, tabular data, etc.)
(e.g., satellite, airplane, unmanned aerial system, radar, weather station, moored buoy, research vessel, autonomous underwater vehicle, animal tagging, manual surveys, enforcement activities, numerical model, etc.)
2. Point of Contact for this Data Management Plan (author or maintainer)
Notes: The name of the Person of the most recent Support Role of type "Metadata Contact" is used. The support role must be in effect.
Notes: The name of the Organization of the most recent Support Role of type "Metadata Contact" is used. This field is required if applicable.
3. Responsible Party for Data Management
Program Managers, or their designee, shall be responsible for assuring the proper management of the data produced by their Program. Please indicate the responsible party below.
Notes: The name of the Person of the most recent Support Role of type "Data Steward" is used. The support role must be in effect.
4. Resources
Programs must identify resources within their own budget for managing the data they produce.
5. Data Lineage and Quality
NOAA has issued Information Quality Guidelines for ensuring and maximizing the quality, objectivity, utility, and integrity of information which it disseminates.
(describe or provide URL of description):
Process Steps:
- 2007-01-01 00:00:00 - 1. Fly lidar with Optech 2050 at nominal 1.4 m point spacing. 2. Process Airborne GPS using the GrafNAV V7.50 software by Waypoint Consulting of Calgary, Alberta, Canada. 3. Process IMU data using the PosPac V4.2 software by Applanix Corporation of Richmond Hill, Ontario, Canada. 4. Reflective Surface Generation using the ASL Post Processor software by Leica Geosystems software of Terrasolid Limited of Helsinki, Finland.
- 2009-03-25 00:00:00 - The NOAA Office for Coastal Management (OCM) received the files in ASCII format. The files contained Lidar elevation and intensity measurements. The data were in State Plane New York West, FIPS 3103 coordinates, horizontal units of measure of US survey feet and in NAVD88 Geoid 03 vertical datum with vertical units of measure of feet. OCM performed the following processing to the data to make it available within the Digital Coast: 1. The data were converted from NY State Plane coordinates to geographic coordinates. 2. The data were converted from NAVD88 (orthometric) heights to GRS80 (ellipsoid) heights using Geoid 03. 3. The LAS data were sorted by latitude and the headers were updated. 4. The data were filtered to remove outliers.
(describe or provide URL of description):
6. Data Documentation
The EDMC Data Documentation Procedural Directive requires that NOAA data be well documented, specifies the use of ISO 19115 and related standards for documentation of new data, and provides links to resources and tools for metadata creation and validation.
Missing/invalid information:
- 1.6. Type(s) of data
- 1.7. Data collection method(s)
- 3.1. Responsible Party for Data Management
- 4.1. Have resources for management of these data been identified?
- 4.2. Approximate percentage of the budget for these data devoted to data management
- 5.2. Quality control procedures employed
- 7.1. Do these data comply with the Data Access directive?
- 7.1.1. If data are not available or has limitations, has a Waiver been filed?
- 7.1.2. If there are limitations to data access, describe how data are protected
- 7.4. Approximate delay between data collection and dissemination
- 8.1. Actual or planned long-term data archive location
- 8.3. Approximate delay between data collection and submission to an archive facility
- 8.4. How will the data be protected from accidental or malicious modification or deletion prior to receipt by the archive?
(describe or provide URL of description):
7. Data Access
NAO 212-15 states that access to environmental data may only be restricted when distribution is explicitly limited by law, regulation, policy (such as those applicable to personally identifiable information or protected critical infrastructure information or proprietary trade information) or by security requirements. The EDMC Data Access Procedural Directive contains specific guidance, recommends the use of open-standard, interoperable, non-proprietary web services, provides information about resources and tools to enable data access, and includes a Waiver to be submitted to justify any approach other than full, unrestricted public access.
None
Notes: The name of the Organization of the most recent Support Role of type "Distributor" is used. The support role must be in effect. This information is not required if an approved access waiver exists for this data.
Notes: This field is required if a Distributor has not been specified.
https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/112/index.html
Notes: All URLs listed in the Distribution Info section will be included. This field is required if applicable.
This data can be obtained on-line at the following URL: https://coast.noaa.gov/dataviewer
The data set is dynamically generated based on user-specified parameters.
;
Notes: This field is required if applicable.
8. Data Preservation and Protection
The NOAA Procedure for Scientific Records Appraisal and Archive Approval describes how to identify, appraise and decide what scientific records are to be preserved in a NOAA archive.
(Specify NCEI-MD, NCEI-CO, NCEI-NC, NCEI-MS, World Data Center (WDC) facility, Other, To Be Determined, Unable to Archive, or No Archiving Intended)
Notes: This field is required if archive location is World Data Center or Other.
Notes: This field is required if archive location is To Be Determined, Unable to Archive, or No Archiving Intended.
Notes: Physical Location Organization, City and State are required, or a Location Description is required.
Discuss data back-up, disaster recovery/contingency planning, and off-site data storage relevant to the data collection
9. Additional Line Office or Staff Office Questions
Line and Staff Offices may extend this template by inserting additional questions in this section.