49917 or2010_dogami_yambo_m1077_metadata Data Set Published / External 49401 Lidar - partner (no harvest) Project Completed 2011-12 The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for multiple areas within the State of Oregon. The areas for LiDAR collection have been designed as part of a collaborative effort of state, federal, and local agencies in order to meet a wide range of project goals. This LiDAR data set was collected in 7 delivery areas from January 3 through July 14, 2010 and encompasses portions of the following counties in Oregon: Lincoln, Polk, Tillamook and Yamhill. This data set consists of bare earth and unclassified points. The average point density is 9.17 points per square meter over terrestrial surfaces. In some areas of heavy vegetation or forest cover, there may be relatively few ground points in the LiDAR data. Elevation values for open water surfaces are not valid elevation values because few LiDAR points are returned from water surfaces. LiDAR intensity values were also collected. This LiDAR data set was collected on different dates and organized into 7 deliveries. To determine which delivery or deliveries are in your area of interest, download yambo_deliveries.pdf at: https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/1077/supplemental/yambo_deliveries.pdf The specific date of collection and total area covered for each delivery are listed below. Delivery 1: Date of Collection: 20100414 Total Area = 10,760 sq acres Delivery 2: Date of Collection: 20100301-20100605 Total Area = 62,451 sq acres Delivery 3: Date of Collection: 20100507-20100714 Total Area = 122,938 sq acres Delivery 4: Date of Collection: 20100103-20100527 Total Area = 97,317 sq acres Delivery 5: Date of Collection: 20100103-20100527 Total Area = 147,839 sq acres Delivery 6: Date of Collection: 20100305-20100515 Total Area = 84,277 sq acres Delivery 7: Date of Collection: 20100317-20100714 Total Area = 167,271 sq acres Original contact information: Contact Name: Ian Madin Contact Org: DOGAMI Phone: 971-673-1542 Email: ian.madin@dogami.state.or.us Provide high resolution terrain elevation and land cover elevation data. 10561 The final LiDAR Report for the Yambo study area may be accessed at: https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/1077/supplemental/Yambo_Report_All_Areas.doc A footprint of this data set may be viewed in Google Earth at: https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/1077/supplemental/2010_Oregon_DOGAMI_Yambo_Lidar.kmz Theme ISO 19115 Topic Category elevation Theme Bare earth Theme Bare ground Theme DOGAMI Theme High-resolution Theme Light Detection and Ranging Office for Coastal Management Charleston SC Data Set None Planned Any conclusions drawn from the analysis of this information are not the responsibility of the Oregon Department of Geology and Mineral Industries (DOGAMI), the Office for Coastal Management or its partners. DOGAMI Data Steward 2011-12 Organization NOAA Office for Coastal Management NOAA/OCM coastal.info@noaa.gov 2234 South Hobson Ave Charleston SC 29405-2413 (843) 740-1202 https://coast.noaa.gov NOAA Office for Coastal Management Home Page Online Resource Distributor 2011-12 Organization NOAA Office for Coastal Management NOAA/OCM coastal.info@noaa.gov 2234 South Hobson Ave Charleston SC 29405-2413 (843) 740-1202 https://coast.noaa.gov NOAA Office for Coastal Management Home Page Online Resource Metadata Contact 2011-12 Organization NOAA Office for Coastal Management NOAA/OCM coastal.info@noaa.gov 2234 South Hobson Ave Charleston SC 29405-2413 (843) 740-1202 https://coast.noaa.gov NOAA Office for Coastal Management Home Page Online Resource Point of Contact 2011-12 Organization NOAA Office for Coastal Management NOAA/OCM coastal.info@noaa.gov 2234 South Hobson Ave Charleston SC 29405-2413 (843) 740-1202 https://coast.noaa.gov NOAA Office for Coastal Management Home Page Online Resource Ground Condition -124.017166 -123.013066 45.428381 44.745281 Range 2010-03-01 2010-07-14 Yes Unclassified This data can be obtained on-line at the following URL: https://coast.noaa.gov/dataviewer/#/lidar/search/where:ID=1077 This data set is dynamically generated based on user-specified parameters. ; None Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations. https://coast.noaa.gov/dataviewer/#/lidar/search/where:ID=1077 2011-12 Organization NOAA Office for Coastal Management Customized Download Create custom data files by choosing data area, product type, map projection, file format, datum, etc. Zip Zip https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/1077/index.html 2011-12 Organization NOAA Office for Coastal Management Bulk Download Simple download of data files. LAZ LAS/LAZ - LASer Zip https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/1077/supplemental/2010_Oregon_DOGAMI_Yambo_Lidar.kmz Browse Graphic Browse Graphic kmz This graphic shows the lidar coverage for the Yambo Study Area. https://coast.noaa.gov/dataviewer Online Resource https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/1077/supplemental/Yambo_Report_All_Areas.pdf Project report Online Resource pdf Project report covering all areas. 2016-05-23 Date that the source FGDC record was last modified. 2017-11-14 Converted from FGDC Content Standards for Digital Geospatial Metadata (version FGDC-STD-001-1998) using 'fgdc_to_inport_xml.pl' script. Contact Tyler Christensen (NOS) for details. 2018-02-08 Partial upload of Positional Accuracy fields only. 2018-03-13 Partial upload to move data access links to Distribution Info. Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 2; ESRI ArcCatalog 9.2.0.1324 Project specifications required the LiDAR foot print to fall within 0.15 and 0.40 meters. Absolute accuracy compares known Real Time Kinematic (RTK) ground survey points to the closest laser point. For the Yambo Study Area, 12,171 RTK points were collected for data delivered. The final vertical accuracy value for the project is 0.12 ft (0.04 m) RMSE. LiDAR data has been collected and processed for all areas within the project study area. Upon receipt from vendor (Watershed Sciences), all LiDAR data was independently reviewed by staff from the Oregon Department of Geology and Mineral Industries (DOGAMI) to ensure project specifications were met. All data were inventoried for completeness and data were checked for quality, which included examining LiDAR data for errors associated with internal data consistency, model quality, and accuracy. 1 The LiDAR data were collected between January 3 and July 14, 2010. The survey used Leica ALS60 and Leica ALS50 Phase II laser sensors mounted in multiple Cessna Caravans 208B. The systems were set to acquire greater than or equal to 105,000 laser pulses per second (i.e. 105 kHz pulse rate) and flown at 900 and 1300 meters above ground level (AGL), capturing a scan angle of plus or minus 14 degrees from nadir. These settings were developed to yield points with an average native density of greater than or equal to 8 points per square meter over terrestrial surfaces. The native pulse density is the number of pulses emitted by the LiDAR system. Some types of surfaces (i.e. dense vegetation or water) may return fewer pulses than the laser originally emitted. Therefore, the delivered density can be less than the native density and lightly variable according to distributions of terrain, land cover, and water bodies. The study area was surveyed with opposing flight line side-lap of greater than or equal to 50 percent (greater than or equal to 100 percent overlap) to reduce laser shadowing and increase surface laser painting. The system allows up to four range measurements per pulse, and all discernible laser returns were processed for the output dataset. During the LiDAR survey of the study area, static (1 Hz recording frequency) ground surveys were conducted over either known or set monuments. After the airborne survey, the static GPS data are processed using triangulation with CORS (continuously operating reference station) and checked against the Online Positioning User Service (OPUS) to quantify daily variance. Multiple sessions are processed over the same monument to confirm the antenna height measurements and reported position accuracy. 2010-01-01T00:00:00 2 1. Laser point coordinates are computed using the IPAS and ALS Post Processor software suites based on independent data from the LiDAR system (pulse time, scan angle), and aircraft trajectory data (SBET). Laser point returns (first through fourth) are assigned an associated (x, y, z) coordinate along with unique intensity values (0-255). The data are output into large LAS v. 1.1 files; each point maintains the corresponding scan angle, return number (echo), intensity, and x, y, z (easting, northing, and elevation) information. 2. These initial laser point files are too large to process. To facilitate laser point processing, bins (polygons) are created to divide the dataset into manageable sizes (< 500 MB). Flightlines and LiDAR data are then reviewed to ensure complete coverage of the study area and positional accuracy of the laser points. 3. Once the laser point data are imported into bins in TerraScan, a manual calibration is performed to assess the system offsets for pitch, roll, heading, and mirror scale. Using a geometric relationship developed by Watershed Sciences, each of these offsets is resolved and corrected if necessary. 4. The LiDAR points are then filtered for noise, pits, and birds by screening for absolute elevation limits, isolated points, and height above ground. Each bin is then inspected for pits and birds manually; spurious points are removed. For a bin containing approximately 7.5-9.0 million points, an average of 50-100 points are typically found to be artificially low or high. These spurious non-terrestrial laser points must be removed from the dataset. Common sources of non-terrestrial returns are clouds, birds, vapor, and haze. 5. The internal calibration is refined using TerraMatch. Points from overlapping lines are tested for internal consistency and final adjustments are made for system misalignments (i.e., pitch, roll, heading offsets and mirror scale). Automated sensor attitude and scale corrections yield 3-5 cm improvements in the relative accuracy. Once the system misalignments are corrected, vertical GPS drift is then resolved and removed per flight line, yielding a slight improvement (<1 cm) in relative accuracy. At this point in the workflow, data have passed a robust calibration designed to reduce inconsistencies from multiple sources (i.e. sensor attitude offsets, mirror scale, GPS drift) using a procedure that is comprehensive (i.e. uses all of the overlapping survey data). Relative accuracy screening is complete. 6. The TerraScan software suite is designed specifically for classifying near-ground points (Soininen, 2004). The processing sequence begins by 'removing' all points that are not 'near' the earth based on geometric constraints used to evaluate multi-return points. The resulting bare earth (ground) model is visually inspected and additional ground point modeling is performed in site-specific areas (over a 50-meter radius) to improve ground detail. This is only done in areas with known ground modeling deficiencies, such as: bedrock outcrops, cliffs, deeply incised stream banks, and dense vegetation. In some cases, ground point classification includes known vegetation (i.e., understory, low/dense shrubs, etc.) and these points are manually reclassified as non-grounds. 2010-01-01T00:00:00 3 The NOAA Office for Coastal Management (OCM) received the files in las format. The files contained LiDAR elevation and intensity measurements. The data were in Oregon Lambert (NAD83), International Feet coordinates and NAVD88 (Geoid 03) vertical datum. OCM performed the following processing for data storage and provisioning purposes: 1. The data were converted from Oregon Lambert (NAD83), International Feet coordinates to geographic coordinates. 2. The data were converted from NAVD88 (orthometric) heights to GRS80 (ellipsoid) heights using Geoid 03. 3. The vertical units of the data were converted from International feet to meters. 4. The data were sorted by latitude and the headers were updated. 2011-01-01T00:00:00 gov.noaa.nmfs.inport:49917 Anne Ball 2017-11-15T15:23:09 SysAdmin InPortAdmin 2023-10-17T16:12:16 2022-03-16 OCM Partners OCMP 1002 Public No No 2022-03-16 1 Year 2023-03-16