Data Management Plan
GUID: gov.noaa.nmfs.inport:66199 | Published / External
Data Management Plan
DMP Template v2.0.1 (2015-01-01)Please provide the following information, and submit to the NOAA DM Plan Repository.
Reference to Master DM Plan (if applicable)
As stated in Section IV, Requirement 1.3, DM Plans may be hierarchical. If this DM Plan inherits provisions from a higher-level DM Plan already submitted to the Repository, then this more-specific Plan only needs to provide information that differs from what was provided in the Master DM Plan.
1. General Description of Data to be Managed
These data represent modeled, historical exposure of U.S. offshore, coastal, and international waters to tropical cyclone activity within the Eastern Pacific Ocean basin (1987-2016). BOEM Outer Continental Shelf Lease Blocks were used to construct the grid by which exposure was quantified. Exposure was quantified using intersecting storm tracks, overlapping wind intensity areas, and mathematical return intervals. Symbology is based on the modeled occurrence of tropical storm force (34-knot) or greater winds per lease block. Due to the way winds were calculated differently over land and over water, the interpretation of wind exposure metrics within coastal areas should be interpreted carefully. Data represent past climatology only and do not suggest predicted future impacts or exposure.
Notes: Only a maximum of 4000 characters will be included.
Notes: Data collection is considered ongoing if a time frame of type "Continuous" exists.
Notes: All time frames from all extent groups are included.
Notes: All geographic areas from all extent groups are included.
(e.g., digital numeric data, imagery, photographs, video, audio, database, tabular data, etc.)
(e.g., satellite, airplane, unmanned aerial system, radar, weather station, moored buoy, research vessel, autonomous underwater vehicle, animal tagging, manual surveys, enforcement activities, numerical model, etc.)
2. Point of Contact for this Data Management Plan (author or maintainer)
Notes: The name of the Person of the most recent Support Role of type "Metadata Contact" is used. The support role must be in effect.
Notes: The name of the Organization of the most recent Support Role of type "Metadata Contact" is used. This field is required if applicable.
3. Responsible Party for Data Management
Program Managers, or their designee, shall be responsible for assuring the proper management of the data produced by their Program. Please indicate the responsible party below.
Notes: The name of the Person of the most recent Support Role of type "Data Steward" is used. The support role must be in effect.
Programs must identify resources within their own budget for managing the data they produce.
5. Data Lineage and Quality
NOAA has issued Information Quality Guidelines for ensuring and maximizing the quality, objectivity, utility, and integrity of information which it disseminates.
(describe or provide URL of description):
- 2018-08-01 00:00:00 - CREATE THE GRID 1. Within the Pacific Ocean basin, download the OCS lease blocks as the grid by which exposure will be modeled. 2. Remove all unnecessary fields and modify attributes as needed.
- 2018-09-01 00:00:00 - MODELING EXPOSURE 23. Buffer each (Eastern Pacific) subset (Cat 1, Cat 2, etc.) based on the respective MEW calculations (34 data sets total). Set Side Type field to right or left, depending on the buffer being run. Merge respective wind speed buffers (34kt, 50kt, 64kt) and then dissolve by storm ID (Serial_Num), storm name (Name), and season (Season). 24. Perform Spatial Join of the composite grid and buffers (34kt, 50kt, 64kt) to generate wind threshold counts per grid cell. 25. Perform Spatial Join of the composite grid and IBTrACS storm segments to generate storm segment counts per block. 26. Join count values of all outputs (34kt, 50kt, 64kt, and segments) together, based on the gridID field. 27. Calculate an average "return interval" value (30 years / count) per grid cell for each wind threshold (34kt, 50kt, 64kt). 28. Remove all unnecessary fields and populate others according to data dictionary.
- 2018-08-01 00:00:00 - CLIMATOLOGY STEPS (MEW calculations) 3. Using the Extended Best Track (EBT) dataset (NOTE: this is an Atlantic Ocean basin data set), calculate the Maximum Extent of Winds (MEW) values following these steps. MEW are wind radii distances per standard wind threshold (34kt, 50kt, 64kt). 4. From http://rammb.cira.colostate.edu/research/tropical_cyclones/tc_extended_best_track_dataset/data/ebtrk_atlc_1988_2016.txt, right-click and save the EBT data (1988-2016) as a text file and open in Excel, setting custom fixed-width columns within the import wizard. Insert missing column breaks where necessary and set the width carefully, capturing the appropriate characters per column. Save file. 5. Assign each column a field name based on metadata here: (http://rammb.cira.colostate.edu/research/tropical_cyclones/tc_extended_best_track_dataset/docs/ebtrk_readme.txt). 6. Remove all EBT features in which storm type equals L, W, or D. (NOTE: No storm type values of 'D' were noted in the EBT data, even though the designation is stated within the metadata.) 7. Remove -99 values within fields. 8. Remove features if wind radii values in all four quadrants are zero. Per feature, even if only one of the four quadrants (per wind threshold) has a value above zero, retain the zero values in the other three cells for that wind threshold. 9. Remove all features with maximum wind values below 34 knots. (By definition, no wind radii values exist for EBT features with maximum winds below 34 knots, so these features are not relevant for MEW calculations.) 10. Modify the "longitudeWest" column by converting the values to negative values, so that features will plot appropriately (i.e. in the eastern hemisphere). Where necessary, convert longitude values within the eastern hemisphere by subtracting the value from 360. 11. Add the modified EBT data to ArcMap and export table as feature class. 12. Perform Select By Location, where all EBT points occurring over land (using a global countries layer) are selected. Include a 150nm buffer of the countries layer (with small islands removed) to select those EBT points occurring over land. (This is based on tropical cyclone literature, from Kruk 2010.) Export these selected features as a new feature class. These features will be used to calculate the average MEW values (buffer distances) for overland storm track segments. Switch the selection to select those features over water only. Export these selected features as a new feature class. These features will be used to calculate the average MEW values (buffer distances) for overwater storm track segments. If any overwater points exist over the Pacific Ocean basin, remove these. 13. For the overwater feature class, generate (storm) "category" values in a new field, based on wind speed values (see http://www.nhc.noaa.gov/aboutsshws.php). Due to the low sample of Cat 5 storms (1988-2016 = 28 points), combine these storms' (EBT points) wind radii values with the Cat 4 points when calculating MEW. 14. For the overland feature class, generate (storm) "category" values in a new field, based on wind speed values (see http://www.nhc.noaa.gov/aboutsshws.php). Due to the low sample of Cat 5 storms (1988-2016 = 24 points), combine these storms' (EBT points) wind radii values with the Cat 4 points when calculating MEWs. 15. Calculate MEW values per category for the overwater and overland features (separately) and record in a table. Compute averages for right (northeast, southeast) and left (northwest, southwest) quadrants. 16. Multiply all values by 0.67 to compute buffers for Eastern Pacific (EPAC) storms. This calculation is based on literature that has compared tropical cyclone sizes across global basins. This literature notes that wind swaths of EPAC tropical storms are approximately 33% smaller than North Atlantic tropical storms. (NOTE: size proportions between the North Atlantic and Eastern Pacific storms are variable within the literature.)
- 2018-08-01 00:00:00 - STORM TRACKS STEPS 17. Extract those features in the IBTrACS data that are: 1) attributed to the Eastern Pacific (EP) basin; 2) occur in or after 1987; and 3) have maximum wind values above 33 knots. 18. Extract those features (per basin) that are attributed as extratropical (ET), subtropical (SS), or tropical (TS). The Eastern Pacific only had one feature denoted at subtropical, so it was removed and not included in the exposure modeling. 19. Feature (segments) from EPAC that crossed the International Dateline were trimmed, as these features cause issues when running the buffer tool in subsequent steps. 20. Create a (storm) "Category" field. For features (per basin) that are tropical storms ('TS'), modify the field value to the appropriate category, based on wind speed (see http://www.nhc.noaa.gov/aboutsshws.php). Also designate features as 'ET', 'SS', or 'TS' accordingly. 21. Separate the overland and overwater storm segments into separate feature classes. Do this by extracting all segments "completely contained" within the "land + 150nm buffer" layer. (NOTE: This was only done for the North Atlantic segments. The vast majority of Eastern Pacific segments (about 99%) within BOEM's Pacific lease blocks do not occur over land. Additionally, the MEW values for segments that do intersect land (i.e. Hawaiian Islands) compared to MEW values over water would be very minimal.) 22. Separate EPAC storm segments by the seven categories (SS, ET, TS, 1, 2, 3, 4/5) into separate layers. (NOTE: For the ET, SS, and TS subsets, make additional subsets of these for the following segments: a) segments =34-49kt; b) segments =50-63kt; and c) segments >=64kt. This is required since not every ET, SS, and TS segment has winds greater than 50kt or 64kt, like Cat 1-Cat 5 segments do by definition.)
(describe or provide URL of description):
6. Data Documentation
The EDMC Data Documentation Procedural Directive requires that NOAA data be well documented, specifies the use of ISO 19115 and related standards for documentation of new data, and provides links to resources and tools for metadata creation and validation.
- 1.3. Is this a one-time data collection, or an ongoing series of measurements?
- 1.4. Actual or planned temporal coverage of the data
- 1.6. Type(s) of data
- 1.7. Data collection method(s)
- 2.1. Point of Contact Name
- 2.4. Point of Contact Email
- 3.1. Responsible Party for Data Management
- 4.1. Have resources for management of these data been identified?
- 4.2. Approximate percentage of the budget for these data devoted to data management
- 5.2. Quality control procedures employed
- 7.1. Do these data comply with the Data Access directive?
- 7.1.1. If data are not available or has limitations, has a Waiver been filed?
- 7.1.2. If there are limitations to data access, describe how data are protected
- 7.2. Name of organization of facility providing data access
- 7.2.1. If data hosting service is needed, please indicate
- 7.3. Data access methods or services offered
- 7.4. Approximate delay between data collection and dissemination
- 8.1. Actual or planned long-term data archive location
- 8.2. Data storage facility prior to being sent to an archive facility
- 8.3. Approximate delay between data collection and submission to an archive facility
- 8.4. How will the data be protected from accidental or malicious modification or deletion prior to receipt by the archive?
(describe or provide URL of description):
7. Data Access
NAO 212-15 states that access to environmental data may only be restricted when distribution is explicitly limited by law, regulation, policy (such as those applicable to personally identifiable information or protected critical infrastructure information or proprietary trade information) or by security requirements. The EDMC Data Access Procedural Directive contains specific guidance, recommends the use of open-standard, interoperable, non-proprietary web services, provides information about resources and tools to enable data access, and includes a Waiver to be submitted to justify any approach other than full, unrestricted public access.
Notes: The name of the Organization of the most recent Support Role of type "Distributor" is used. The support role must be in effect. This information is not required if an approved access waiver exists for this data.
Notes: This field is required if a Distributor has not been specified.
Notes: All URLs listed in the Distribution Info section will be included. This field is required if applicable.
Notes: This field is required if applicable.
8. Data Preservation and Protection
The NOAA Procedure for Scientific Records Appraisal and Archive Approval describes how to identify, appraise and decide what scientific records are to be preserved in a NOAA archive.
(Specify NCEI-MD, NCEI-CO, NCEI-NC, NCEI-MS, World Data Center (WDC) facility, Other, To Be Determined, Unable to Archive, or No Archiving Intended)
Notes: This field is required if archive location is World Data Center or Other.
Notes: This field is required if archive location is To Be Determined, Unable to Archive, or No Archiving Intended.
Notes: Physical Location Organization, City and State are required, or a Location Description is required.
Discuss data back-up, disaster recovery/contingency planning, and off-site data storage relevant to the data collection
9. Additional Line Office or Staff Office Questions
Line and Staff Offices may extend this template by inserting additional questions in this section.