2018 WA DNR Lidar DEM: Chelan, WA

Collection Dates

Create custom data files by choosing data area, product type, map projection, file format, datum, etc. A new metadata will be produced to reflect your request using this record as a base. Change to an orthometric vertical datum is one of the many options.

Bulk download of data files in GeoTiff format, WA State Plane South NAD83(HARN) US survey feet coordinates and orthometric heights in feet.

Link to the Quantum Spatial, Inc. Technical Lidar Report from the Washington Lidar Portal.

The Data Access Viewer (DAV) allows a user to search for and download elevation, imagery, and land cover data for the coastal U.S. and its territories. The data, hosted by the NOAA Office for Coastal Management, can be customized and requested for free download through a checkout interface. An email provides a link to the customized data, while the original data set is available through a link within the viewer.

This graphic displays the footprint for this lidar data set.

Link to custom download, from the Data Access Viewer (DAV), the lidar point data from which these raster Digital Elevation Model (DEM) data were created.

Airborne Survey

The LiDAR survey was accomplished using a Riegl VQ-1560i sensor system mounted in a Cessna Caravan. Settings were used to yield an average pulse density of 8 pulses/m2 over the Chelan project area. The Riegl laser system can record unlimited range measurements (returns) per pulse, though it is not uncommon for some types of surfaces (e.g., dense vegetation or water) to return fewer pulses to the LiDAR sensor than the laser originally emitted. The discrepancy between first return and overall delivered density will vary depending on terrain, land cover, and the prevalence of water bodies. All discernible laser returns were processed for the output dataset.

All areas were surveyed with an opposing flight line side-lap of ≥50% (≥100% overlap) in order to reduce laser shadowing and increase surface laser painting. To accurately solve for laser point position (geographic coordinates x, y and z), the positional coordinates of the airborne sensor and the attitude of the aircraft were recorded continuously throughout the LiDAR data collection mission. Position of the aircraft was measured twice per second (2 Hz) by an onboard differential GPS unit, and aircraft attitude was measured 200 times per second (200 Hz) as pitch, roll and yaw (heading) from an onboard inertial measurement unit (IMU). To allow for post-processing correction and calibration, aircraft and sensor position and attitude data are indexed by GPS time.

Once the LiDAR data arrived in the laboratory, QSI employed a suite of automated and manual techniques for processing tasks. Processing tasks included: GPS, kinematic corrections, calculation of laser point position, relative accuracy testing, classification of ground and non-ground points, and assessments of statistical absolute accuracy. The general workflow for calibration of the LiDAR data was as follows:

Resolve GNSS kinematic corrections for aircraft position data using kinematic aircraft GNSS (collected at 2Hz) and IMU (collected at 200Hz) data with Trimble CenterPoint PP-RTX methodologies. Used POSGNSS, PosPac MMS

Develop a smoothed best estimate of trajectory (SBET) file that blends post-processed aircraft position with attitude data. Sensor heading, position, and attitude are calculated throughout the survey. Used POSGNSS, PosPac MMS

Calculate laser point position by associating SBET position to each laser point return time, with offsets relative to scan angle, intensity, etc. This process creates the raw laser point cloud data for the entire survey in *.las (ASPRS v 1.2) format, in which each point maintains the corresponding scan angle, return number (echo), intensity, and x, y, z information. These data are converted to orthometric elevation (NAVD88 & NGVD29) by applying a Geoid correction. Used RiProcess and RiWorld

Test relative accuracy using ground classified points per each flight line. Perform automated line-to-line calibrations for system attitude parameters (pitch, roll, heading), mirror flex (scale), and GNSS/IMU drift. Calibrations are performed on ground classified points from paired flight lines. Every flight line is used for relative accuracy calibration. Used TerraMatch, TerraScan, QSI Proprietary Software

Assess NVA via direct comparisons of ground classified points to ground RTK survey data. Point classifications are assigned for features of interest via a combination of QSI custom algorithms and manual inspection. Used TerraScan, TerraMatch, Trimble Business Center

The NOAA Office for Coastal Management (OCM) downloaded 33 raster DEM files in GeoTiff format from the Washington Lidar Portal. The data were in Washington State Plane South NAD83(HARN), US survey feet coordinates and NAVD88 (Geoid12B) elevations in feet. The bare earth raster files were at a 3 feet grid spacing. No metadata record was provided with the data. This record is populated with information from the Quantum Geospatial, Inc. technical report downloaded from the Washington Dept. of Natural Resources Washington Lidar Portal. That report is linked within this metadata record, please see it for additional information.

OCM performed the following processing on the data for Digital Coast storage and provisioning purposes:

1. Used internal an script to assign the EPSG codes (Horizontal EPSG: 2927 and Vertical EPSG: 6360) to the GeoTiff formatted files.

2. Copied the files to https.