2021 Rhode Island NAIP 4-Band 8 Bit Imagery
OCM Partners
Data Set
(DS)
| ID: 68402
| Published / External
Created: 2022-11-14
|
Last Modified: 2023-05-30
Project (PRJ) | ID: 49403
ID: 68402
Data Set (DS)
* Discovery• First Pass
» Metadata Rubric
Item Identification
* » Title | 2021 Rhode Island NAIP 4-Band 8 Bit Imagery |
---|---|
Short Name | |
* Status | Completed |
Creation Date | |
Revision Date | |
• Publication Date | 2022-10-25 |
* » Abstract |
This data set contains imagery from the National Agriculture Imagery Program (NAIP). The NAIP program is administered by USDA FSA and has been established to support two main FSA strategic goals centered on agricultural production. These are, increase stewardship of America's natural resources while enhancing the environment, and to ensure commodities are procured and distributed effectively and efficiently to increase food security. The NAIP program supports these goals by acquiring and providing ortho imagery that has been collected during the agricultural growing season in the U.S. The NAIP ortho imagery is tailored to meet FSA requirements and is a fundamental tool used to support FSA farm and conservation programs. Ortho imagery provides an effective, intuitive means of communication about farm program administration between FSA and stakeholders. New technology and innovation is identified by fostering and maintaining a relationship with vendors and government partners, and by keeping pace with the broader geospatial community. As a result of these efforts the NAIP program provides three main products: DOQQ tiles, Compressed County Mosaics (CCM), and Seamline shape files. The Contract specifications for NAIP imagery have changed over time reflecting agency requirements and improving technologies. These changes include image resolution, horizontal accuracy, coverage area, and number of bands. In general, flying seasons are established by FSA and are targeted for peak crop growing conditions. The NAIP acquisition cycle is based on a minimum 3 year refresh of base ortho imagery. The tiling format of the NAIP imagery is based on a 3.75' x 3.75' quarter quadrangle with a 300 pixel buffer on all four sides. NAIP quarter quads are formatted to the UTM coordinate system using the North American Datum of 1983. NAIP imagery may contain as much as 10% cloud cover per tile. |
* Purpose |
NAIP imagery is available for distribution within 60 days of the end of a flying season and is intended to provide current information of agricultural conditions in support of USDA farm programs. For USDA Farm Service Agency, the 60 centimeter GSD product provides an ortho image base for Common Land Unit boundaries and other data sets. The NAIP imagery is generally acquired in projects covering full states in cooperation with state government and other federal agencies that use the imagery for a variety of purposes including land use planning and natural resource assessment. The NAIP is also used for disaster response. While suitable for a variety of uses, prior to 2007 the 2 meter GSD NAIP imagery was primarily intended to assess "crop condition and compliance" to USDA farm program conditions. The 2 meter imagery was generally acquired only for agricultural areas within state projects. |
Notes | |
Other Citation Details | |
• Supplemental Information |
NAIP horizontal accuracy specifications have evolved over the life of the program. From 2003 to 2004 the specifications were as follows: 1-meter GSD imagery was to match within 3-meters, and 2-meter GSD to match within 10 meters of reference imagery. For 2005 the 1-meter GSD specification was changed to 5 meters matching the reference imagery. In 2006 a pilot project was performed using true ground specifications rather than reference imagery. All states used the same specifications as 2005 except Utah, which required a match of +/- 6 meters to true ground. In 2007 all specifications were the same as 2006 except Arizona used true ground specifications and all other states used reference imagery. In 2008 and subsequent years no 2-meter GSD imagery was acquired and all specifications were the same as 2007 except approximately half of the states acquired used true ground specifications and the other half used reference imagery. The 2008 states that used absolute ground control were; Indiana, Minnesota, New Hampshire, North Carolina, Texas, Vermont, and Virginia. Beginning in 2009, all NAIP imagery acquisitions used the +/- 6 meters to ground and in 2016 the specification was changed to +/- 4 meters to true ground. |
DOI (Digital Object Identifier) | |
DOI Registration Authority | |
DOI Issue Date |
Keywords
Theme Keywords
Thesaurus | Keyword |
---|---|
ISO 19115 Topic Category | imageryBaseMapsEarthCover |
None | Aerial Compliance |
None | Compliance |
None | Digital Ortho rectified Image |
None | farming |
None | NAIP |
None | Ortho Rectification |
None | Quarter Quadrangle |
Temporal Keywords
Thesaurus | Keyword |
---|---|
None | 2021 |
* Spatial Keywords
Thesaurus | Keyword |
---|---|
Geographic Names Information System | Rhode Island |
Geographic Names Information System | RI |
Stratum Keywords
Thesaurus | Keyword |
---|---|
Instrument Keywords
Thesaurus | Keyword |
---|---|
Platform Keywords
Thesaurus | Keyword |
---|---|
Physical Location
• » Organization | Office for Coastal Management |
---|---|
• » City | Charleston |
• » State/Province | SC |
• Country | |
• » Location Description |
Data Set Information
* Data Set Scope Code | Data Set |
---|---|
• Data Set Type | |
• Maintenance Frequency | Irregular |
Maintenance Note | |
» Data Presentation Form | Image (digital) |
• Entity Attribute Overview |
32-bit pixels, 4 band color(RGBIR) values 0 - 255 |
Entity Attribute Detail Citation |
None |
Entity Attribute Detail URL | |
Distribution Liability |
Users must assume responsibility to determine the appropriate use of these data. DATA SHOULD NOT BE USED FOR LEGALLY BINDING APPLICATIONS. |
Data Set Credit |
Support Roles
* » Support Role | Data Steward |
---|---|
* » Date Effective From | 2022-08-24 |
Date Effective To | |
Organization | NOAA Office for Coastal Management (NOAA/OCM) |
Address |
2234 South Hobson Ave Charleston, SC 29405-2413 |
Email Address | coastal.info@noaa.gov |
Phone | (843) 740-1202 |
Fax | |
Mobile | |
URL | https://coast.noaa.gov |
Business Hours | |
Contact Instructions |
* » Support Role | Distributor |
---|---|
* » Date Effective From | 2022-08-24 |
Date Effective To | |
Organization | NOAA Office for Coastal Management (NOAA/OCM) |
Address |
2234 South Hobson Ave Charleston, SC 29405-2413 |
Email Address | coastal.info@noaa.gov |
Phone | (843) 740-1202 |
Fax | |
Mobile | |
URL | https://coast.noaa.gov |
Business Hours | |
Contact Instructions |
* » Support Role | Metadata Contact |
---|---|
* » Date Effective From | 2022-08-24 |
Date Effective To | |
Organization | NOAA Office for Coastal Management (NOAA/OCM) |
Address |
2234 South Hobson Ave Charleston, SC 29405-2413 |
Email Address | coastal.info@noaa.gov |
Phone | (843) 740-1202 |
Fax | |
Mobile | |
URL | https://coast.noaa.gov |
Business Hours | |
Contact Instructions |
* » Support Role | Point of Contact |
---|---|
* » Date Effective From | 2022-08-24 |
Date Effective To | |
Organization | NOAA Office for Coastal Management (NOAA/OCM) |
Address |
2234 South Hobson Ave Charleston, SC 29405-2413 |
Email Address | coastal.info@noaa.gov |
Phone | (843) 740-1202 |
Fax | |
Mobile | |
URL | https://coast.noaa.gov |
Business Hours | |
Contact Instructions |
* » Support Role | |
---|---|
* » Date Effective From | |
Date Effective To | |
* » Contact | |
* Contact Instructions |
* » Support Role | |
---|---|
* » Date Effective From | |
Date Effective To | |
* » Contact | |
* Contact Instructions |
* » Support Role | |
---|---|
* » Date Effective From | |
Date Effective To | |
* » Contact | |
* Contact Instructions |
Extents
Currentness Reference | Ground Condition |
---|
Extent Group 1
Extent Description |
---|
Extent Group 1 / Geographic Area 1
* » W° Bound | -71.894 |
---|---|
* » E° Bound | -71.021 |
* » N° Bound | 42.059 |
* » S° Bound | 41.093 |
* » Description |
Extent Group 1 / Vertical Extent
EPSG Code | |
---|---|
Vertical Minimum | |
Vertical Maximum |
Extent Group 1 / Time Frame 1
* » Time Frame Type | Range |
---|---|
* » Start | 2021-08-26 |
End | 2021-09-26 |
Alternate Start As Of Info | |
Alternate End As Of Info | |
Description |
Spatial Information
Spatial Resolution
Angular Distance | |
---|---|
Angular Distance Units | |
Horizontal Distance | |
Horizontal Distance Units | |
Vertical Distance | |
Vertical Distance Units | |
Equivalent Scale Denominator | |
Level of Detail Description |
Spatial Representation
Grid Representation Used? | Yes |
---|---|
Vector Representation Used? | |
Text / Table Representation Used? | |
TIN Representation Used? | |
Stereo Model Representation Used? | |
Video Representation Used? |
Grid Representation
Dimension Count | 2 | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cell Geometry | Point | ||||||||||||
Transformation Parameters Available? | No | ||||||||||||
Axis Dimension |
|||||||||||||
|
|||||||||||||
Axis Dimension |
|||||||||||||
|
|||||||||||||
Axis Dimension |
|||||||||||||
|
Grid Representation
Dimension Count | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cell Geometry | |||||||||||||
Transformation Parameter Available? | |||||||||||||
Axis Dimension |
|||||||||||||
|
|||||||||||||
Axis Dimension |
|||||||||||||
|
Vector Representation
Topology Level | |
---|---|
Complex Object Present? | |
Complex Object Count | |
Composite Object Present? | |
Composite Object Count | |
Curve Object Present? | |
Curve Object Count | |
Point Object Present? | |
Point Object Count | |
Solid Object Present? | |
Solid Object Count | |
Surface Object Present? | |
Surface Object Count |
Reference Systems
Reference System
EPSG Code | |||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Horizontal Resolution |
|||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
Vertical Resolution |
|||||||||||||||||||||||||||||
|
Access Information
Data License | |
---|---|
Data License URL | |
Data License Statement | |
* » Security Class | Unclassified |
* Security Classification System | |
Security Handling Description | |
• Data Access Policy |
Data is available for online custom download. |
» Data Access Procedure | |
• » Data Access Constraints |
There are no limitations for access. |
• Data Use Constraints |
None. The USDA-FSA Aerial Photography Field office asks to be credited in derived products. |
Metadata Access Constraints | |
Metadata Use Constraints |
Distribution Information
Start Date | 2022-08-24 |
---|---|
End Date | Present |
» Download URL | https://coast.noaa.gov/dataviewer/#/imagery/search/where:ID=9589 |
Distributor | NOAA Office for Coastal Management (NOAA/OCM) (2022-08-24 - Present) |
File Name | |
Description | |
File Date/Time | |
File Type (Deprecated) | |
Distribution Format | |
File Size | |
Application Version | |
Compression | |
Review Status |
Start Date | 2022-08-24 |
---|---|
End Date | Present |
» Download URL | https://coastalimagery.blob.core.windows.net/digitalcoast/RI_NAIP_2021_9589/index.html |
Distributor | NOAA Office for Coastal Management (NOAA/OCM) (2022-08-24 - Present) |
File Name | |
Description | |
File Date/Time | |
File Type (Deprecated) | |
Distribution Format | |
File Size | |
Application Version | |
Compression | |
Review Status |
Start Date | |
---|---|
End Date | |
» Download URL | |
Distributor | |
File Name | |
Description | |
File Date/Time | |
File Type | |
FGDC Content Type | |
File Size | |
Application Version | |
Compression | |
Review Status |
Start Date | |
---|---|
End Date | |
» Download URL | |
Distributor | |
File Name | |
Description | |
File Date/Time | |
File Type | |
FGDC Content Type | |
File Size | |
Application Version | |
Compression | |
Review Status |
Start Date | |
---|---|
End Date | |
» Download URL | |
Distributor | |
File Name | |
Description | |
File Date/Time | |
File Type | |
FGDC Content Type | |
File Size | |
Application Version | |
Compression | |
Review Status |
Archive Information
Location | |
---|---|
File Identifier | |
File Name | |
URL | |
Description | |
DOI | |
Archive Date | |
Archive Update Frequency |
Location | |
---|---|
File Identifier | |
File Name | |
URL | |
Description | |
DOI | |
Archive Date | |
Archive Update Frequency |
Location | |
---|---|
File Identifier | |
File Name | |
URL | |
Description | |
DOI | |
Archive Date | |
Archive Update Frequency |
URLs
URL | |
---|---|
Name | |
URL Type | |
File Resource Format | |
Description |
URL | |
---|---|
Name | |
URL Type | |
File Resource Format | |
Description |
URL | |
---|---|
Name | |
URL Type | |
File Resource Format | |
Description |
Activity Log
Activity Time | |
---|---|
Activity Type | |
Responsible Party | |
Description |
Activity Time | |
---|---|
Activity Type | |
Responsible Party | |
Description |
Activity Time | |
---|---|
Activity Type | |
Responsible Party | |
Description |
Issues
Issue Date | |
---|---|
Author | |
Issue |
Issue Date | |
---|---|
Author | |
Issue |
Issue Date | |
---|---|
Author | |
Issue |
Technical Environment
Description |
Unknown |
---|
Data Quality
Representativeness | |
---|---|
Accuracy |
NAIP horizontal accuracy specifications have evolved over the life of the program. From 2003 to 2004 the specifications were as follows: 1-meter GSD imagery was to match within 3-meters, and 2-meter GSD to match within 10 meters of reference imagery. For 2005 the 1-meter GSD specification was changed to 5 meters matching the reference imagery. In 2006 a pilot project was performed using true ground specifications rather than reference imagery. All states used the same specifications as 2005 except Utah, which required a match of +/- 6 meters to true ground. In 2007 all specifications were the same as 2006 except Arizona used true ground specifications and all other states used reference imagery. In 2008 and subsequent years no 2-meter GSD imagery was acquired and all specifications were the same as 2007 except approximately half of the states acquired used true ground specifications and the other half used reference imagery. The 2008 states that used absolute ground control were; Indiana, Minnesota, New Hampshire, North Carolina, Texas, Vermont, and Virginia. Beginning in 2009, all NAIP imagery acquisitions used the +/- 6 meters to ground and in 2016 the specification was changed to +/- 4 meters to true ground. |
Analytical Accuracy | |
Horizontal Positional Accuracy | |
Vertical Positional Accuracy | |
Quantitation Limits | |
Bias | |
Comparability | |
Completeness Measure | |
Precision | |
Analytical Precision | |
Field Precision | |
Sensitivity | |
Detection Limit | |
Completeness Report |
None |
Conceptual Consistency |
NAIP 3.75 minute tile file names are based on the USGS quadrangle naming convention. |
» Quality Control Procedures Employed |
Data Management
» Have Resources for Management of these Data Been Identified? | |
---|---|
» Approximate Percentage of Budget for these Data Devoted to Data Management | |
» Do these Data Comply with the Data Access Directive? | |
» Is Access to the Data Limited Based on an Approved Waiver? | |
» If Distributor (Data Hosting Service) is Needed, Please Indicate | |
» Approximate Delay Between Data Collection and Dissemination | |
» If Delay is Longer than Latency of Automated Processing, Indicate Under What Authority Data Access is Delayed |
|
» Actual or Planned Long-Term Data Archive Location | |
» If World Data Center or Other, Specify | |
» If To Be Determined, Unable to Archive, or No Archiving Intended, Explain |
|
» Approximate Delay Between Data Collection and Archiving | |
» How Will the Data Be Protected from Accidental or Malicious Modification or Deletion Prior to Receipt by the Archive? |
|
Lineage
» Lineage Statement |
---|
Sources
Citation Title | |
---|---|
Contact Role Type | |
Contact Type | |
Contact Name | |
Publish Date | |
Extent Type | |
Extent Start Date/Time | |
Extent End Date/Time | |
Citation URL | |
Citation URL Name | |
Citation URL Description | |
Scale Denominator |
Citation Title | |
---|---|
Contact Role Type | |
Contact Type | |
Contact Name | |
Publish Date | |
Extent Type | |
Extent Start Date/Time | |
Extent End Date/Time | |
Citation URL | |
Citation URL Name | |
Citation URL Description | |
Scale Denominator |
Citation Title | |
---|---|
Contact Role Type | |
Contact Type | |
Contact Name | |
Publish Date | |
Extent Type | |
Extent Start Date/Time | |
Extent End Date/Time | |
Citation URL | |
Citation URL Name | |
Citation URL Description | |
Scale Denominator |
Process Steps
Process Step Number | 1 |
---|---|
» Description |
DOQQ Production Process Description; USDA FSA APFO NAIP Program 2021;
The imagery was collected using the following digital sensors: Leica ADS-100 (Serial Number 10530), Leica ADS-100 (Serial Number 10510), Leica ADS-100 (Serial Number 10515), Leica ADS-100 (Serial Number 10522), Leica ADS-100 (Serial Number 10537), Leica ADS-100 (Serial Number 10519), Leica ADS-100 (Serial Number 10552)
with Flight and Sensor Control Management System (FCMS) firmware: v4.57 and v4.6, Cameras are calibrated radiometrically and geometrically by the manufacturer and are all certified by the USGS.
Collection was performed using a combination of the following twin-engine aircraft with turbines flying at 27,100 ft above mean terrain.
Plane types: C441, C414, Rockwell Turbo Commander Tail numbers: N441EH, N414EH, N440EH, N441FS, N2NQ, N811HJ,N690LS, With these flying heights, there is a 27% sidelap, giving the collected data nominal ground sampling distance of 0.60 meters.
Based-upon the CCD Array configuration present in the ADS digital sensor, imagery for each flight line is 20,000-pixels in width. Red, Green, Blue, Near-Infrared and Panchromatic image bands were collected.
The ADS 100 has the following band specifications: Red 619-651, Green 525-585, Blue 435-495, Near Infrared 808-882, all values are in nanometers. |
Process Date/Time | 2022-02-01 00:00:00 |
Process Contact | |
Phone (Voice) | |
Email Address | |
Source |
Process Step Number | 2 |
---|---|
» Description |
Flight planning was performed in Leica MissionPro over a buffered boundary covering DOQQ extents provided by the USDA. A 500m reduced resolution DEM file was used to determine ground heights. A targeted flight altitude of approximately 27,000 feet above ground level for native 60cm image acquisition with sidelap of 27% was used for flight planning parameters. Five aircraft were utilized for acquisition, the seamline shapefile clarifies which aircraft were used for a given area.
All aircraft were equipped with Leica ADS100 systems where utilized for data capture. The Leica ADS100 pushbroom sensor has been calibrated by the manufacturer as well as validated against a local calibration range. The calibration includes measuring the radiometric and geometric properties of the camera. These data are used in the Post Processing Software to eliminate the radiometric and geometric distortion. All aerial imagery was collected with associated GPS/IMU data. ADS collection requires high quality IMU data for processing and was critical for early access hosting of digital data to the web for USDA interim access and review.
After early access web delivery was complete, all imagery was triangulated using Leica XPro in which the airborne GPS data was constrained to expected limits. To validate the accuracy of the block adjustment derived from GPS/IMU, sensor parameters and conjugate point measurements, photo identifiable ground control points were field surveyed within each State. These points were surveyed using GPS techniques to produce coordinates that are accurate to +/- 0.25 meters RMSE in XYZ. The GPS surveying techniques utilized assured that the coordinates are derived in the required project datum and relative to an approved National Reference System. If the block does not fit the control points within specifications the pass and tie points were reviewed for blunders and weak areas. If, after these corrections were made, the block still does not fit the control well the GPS and IMU processing were reviewed. Once the block has proper statistics and fits the control to specifications, the final bundle adjustment was made. As AT points are frequently on man-made and other vertical features not included in the DEM, these ortho points can only be used to indicate regions of error by the clusters of points that predict excessive horizontal displacement. |
Process Date/Time | 2022-02-01 00:00:00 |
Process Contact | |
Phone (Voice) | |
Email Address | |
Source |
Process Step Number | 3 |
---|---|
» Description |
The final adjustments assure a high quality relative adjustment and a high quality absolute adjustment limited to the airborne GPS data accuracy. This process assures the final absolute accuracy of all geopositioned imagery. Both signalized and photo identified ground control were used to QC and control the IMU/GPS based aerial triangulation bundle block solution. Surdex Grouping Tool provides real-time updates of the USDA APFO Image Metrics. The image technician adjusts image correction parameters to bring the radiometric characteristics of large groups of images within the Image Metrics ranges. For each project area the highest resolution DEM or LiDAR was obtained and utilized for rectification of captured imagery.
A visual inspection of the final DEM using color cycled classification by elevation and a shaded relief was performed to check for gaps, corruption and gross errors. The predicted horizontal error for each point was added as an attribute in the SURDEX enterprise database. An operator reviews ortho seams in areas these predicted errors indicate horizontal error in excess of the contract specifications. Any imagery errors introduced by source DEM required patching from an alternate perspective or strip of photography. Processing hardware used included various brands of survey grade GPS receivers, various brands and models of computers, RAID6 storage, calibrated monitors, various brands of monitor calibration colorimeters. Leica XPro was used for post processing of ADS pushbroom data, triangulation and orthorectification. SURDEX software was used to color correct and remove bidirectional reflectance, vignetting and other illumination trends. USDA APFO Image Metrics are measured and images corrected to conform to the Image Metrics using SURDEX software. GPS/IMU data was reduced to projected coordinates in the appropriate UTM zone using Inertial Explorer software from Novatel. Aerial Triangulation and orthorectification was performed using Leica XPro. SURDEX software was used to adjust for minor radiometric variation between adjacent images. SURDEX software was used to calculate the optimal seam path, check seam topology and create master tiles. SURDEX ortho software generates occlusion/smear polygons used during seam review of steep terrain. SURDEX software was used to visually inspect master tiles for seam and image defects. SURDEX software was used to project and cut final DOQQ image files from masters. |
Process Date/Time | 2022-02-01 00:00:00 |
Process Contact | |
Phone (Voice) | |
Email Address | |
Source |
Process Step Number | 4 |
---|---|
» Description |
SURDEX software was used to create CCM metadata. Lizardtech GeoExpress version 10.0.1.5035 was used to create the CCM image file. SURDEX software was used to perform final formatting, QC and naming of the DOQQ. USGS metadata parser software was used to validate the metadata. Various versions of Microsoft Windows were used in all phases of production. Grouping Tool was used again after DOQQ and CCM production to provide a quality assurance check. Individual DOQQ and CCM may not meet the USDA APFO Image Metrics ranges due to land cover. The goal is to have the state as a whole meet the Image Metrics. All products are reviewed by independent personnel prior to delivery. The delivery is checked for omissions, commissions, naming, formatting, specification compliance and data integrity. |
Process Date/Time | 2022-08-04 00:00:00 |
Process Contact | |
Phone (Voice) | |
Email Address | |
Source |
Process Step Number | |
---|---|
» Description | |
Process Date/Time | |
Process Contact | |
Phone (Voice) | |
Email Address | |
Source |
Process Step Number | |
---|---|
» Description | |
Process Date/Time | |
Process Contact | |
Phone (Voice) | |
Email Address | |
Source |
Process Step Number | |
---|---|
» Description | |
Process Date/Time | |
Process Contact | |
Phone (Voice) | |
Email Address | |
Source |
Acquisition Information
Instruments
Instrument Unavailable Reason |
---|
Identifier | |
---|---|
Docucomp UUID | |
Instrument / Gear | |
Instrument Type | |
Description |
Identifier | |
---|---|
Docucomp UUID | |
Instrument / Gear | |
Instrument Type | |
Description |
Identifier | |
---|---|
Docucomp UUID | |
Instrument / Gear | |
Instrument Type | |
Description |
Platforms
Platform Unavailable Reason |
---|
Identifier | |||||||
---|---|---|---|---|---|---|---|
Docucomp UUID | |||||||
Description | |||||||
Mounted Instruments |
|||||||
|
Identifier | |||||||
---|---|---|---|---|---|---|---|
Docucomp UUID | |||||||
Description | |||||||
Mounted Instruments |
|||||||
|
Identifier | |||||||
---|---|---|---|---|---|---|---|
Docucomp UUID | |||||||
Description | |||||||
Mounted Instruments |
|||||||
|
FAQs
Date | |
---|---|
Author | |
Question | |
Answer |
Child Items
Rubric scores updated every 15m
Score | Type | Title |
---|---|---|
Related Items
Item Type | Relationship Type | Title |
---|---|---|
Catalog Details
Catalog Item ID | 68402 |
---|---|
Metadata Record Created By | Erik Hund |
Metadata Record Created | 2022-11-14 16:29+0000 |
Metadata Record Last Modified By | SysAdmin InPortAdmin |
» Metadata Record Last Modified | 2023-05-30 18:10+0000 |
Metadata Record Published | 2022-11-14 |
Owner Org | OCMP |
Metadata Publication Status | Published Externally |
Do Not Publish? | N |
Metadata Workflow State | Published / External |
Metadata Last Review Date | 2022-11-14 |
Metadata Review Frequency | 1 Year |
Metadata Next Review Date | 2023-11-14 |
Tags |
---|