2022 OGRIP Lidar: Wood County, OH

Create custom data files by choosing data area, product type, map projection, file format, datum, etc. A new metadata will be produced to reflect your request using this record as a base. Change to an orthometric vertical datum is one of the many options.

Bulk download of data files in LAZ format, UTM Zone 17N NAD83 meters coordinates and elevations in NAVD88(GEOID18) meters.

The Data Access Viewer (DAV) allows a user to search for and download elevation, imagery, and land cover data for the coastal U.S. and its territories. The data, hosted by the NOAA Office for Coastal Management, can be customized and requested for free download through a checkout interface. An email provides a link to the customized data, while the original data set is available through a link within the viewer.

Link to view the point cloud (using the Entwine Point Tile (EPT) format) in the 3D Potree viewer.

Entwine Point Tile (EPT) is a simple and flexible octree-based storage format for point cloud data. The data is organized in such a way that the data can be reasonably streamed over the internet, pulling only the points you need. EPT files can be queried to return a subset of the points that give you a representation of the area. As you zoom further in, you are requesting higher and higher densities. A dataset in EPT will contain a lot of files, however, the ept.json file describes all the rest. The EPT file can be used in Potree and QGIS to view the point cloud.

Using City Mapper lidar sensors to acquire high density data, at a nominal pulse spacing (NPS) of 0.25 meters, were collected for this task order in 3 total missions. Multiple returns were recorded for each laser pulse along with an intensity value for each return. The survey crews were on-site, operating a Global Navigation Satellite System (GNSS) Base Station for the airborne GPS support.

The individual flight lines were inspected to ensure the systematic and residual errors have been identified and removed. Then, the flight lines were compared to adjacent flight lines for any mismatches to obtain a homogenous coverage throughout the project area. The point cloud underwent a classification process to determine bare-earth points and non-ground points utilizing "first and only" as well as "last of many" lidar returns. This process determined Default (Class 1), Bare-earth (Class 2), Low Vegetation (Class 3), Medium Vegetation (Class 4), High Vegetation (Class 5), Building (Class 6), Noise (Class 7), Bridge Deck (Class 17), and High Noise (Class 18). The bare-earth (Class 2 - Ground) lidar points underwent a manual QA/QC step to verify the quality of the DEM as well as a peer-based QC review. This included a review of the DEM surface to remove artifacts and ensure topographic quality. The surveyed ground control points are used to make vertical adjustments to the data set and to perform the accuracy checks and statistical analysis of the lidar dataset. Supervisory QC monitoring of work in progress and completed editing ensured consistency of classification character and adherence to project requirements across the entire project area. The resulting deliverables for this task order consist of classified LAS file in LAS 1.2 format and 2.5 feet pixel size DEM files in Erdas IMG format.

All data was manually reviewed and any remaining artifacts removed using functionality provided by TerraScan and TerraModeler. Global Mapper was used as a final check of the bare earth dataset. GeoCue was then used to create the deliverable industry-standard LAS files. Woolpert proprietary software and LP360 was used to perform final statistical analysis of the classes in the LAS files, on a per tile level to verify final classification metrics and full LAS header information.

The NOAA Office for Coastal Management (OCM) downloaded 11523 LAS files from the Ohio Geographically Referenced Information Program (OGRIP). The files were in Ohio State Plane North NAD83(HARN), US feet coordinates and the elevations were in NAVD88 (GEOID03) feet. The LAS files contain 9 classifications: 1 = unclassified; 2 = ground (or Bare Earth); 3 = low vegetation, 4 = medium vegetation, 5 = high vegetation, 6 = buildings, 7 = low point (noise); 17 = bridge deck; 18 = high noise. The class 7 and 18 points had the withheld bit set. OCM processed the 1, 2, 3, 4, 5, 6, and 17 point classes to the Digital Coast Data Access Viewer (DAV).

OCM performed the following processing on the data for Digital Coast storage and provisioning purposes:

1. The data were converted to laz format using laszip

2. Internal OCM scripts were run to check the number of points by classification and by flight ID and the gps, elevation, and intensity ranges.

3. Internal OCM scripts were run on the laz files to:

a. Convert from orthometric (NAVD88) elevations to ellipsoid elevations using the GEOID03 model

b. Convert from OH State Plane North (NAD83 HARN), US survey foot coordinates to geographic coordinates

c. Convert from vertical units of feet to meters

d. Assign the geokeys, to sort the data by gps time and zip the data to database and to AWS S3.