2017 USFS Lidar: Diamond Lake, OR 2017 diamond lake m9830 eng Dataset EARTH SCIENCE > LAND SURFACE > TOPOGRAPHY > TERRAIN ELEVATION EARTH SCIENCE > OCEANS > COASTAL PROCESSES > COASTAL ELEVATION elevation CONTINENT > NORTH AMERICA > UNITED STATES OF AMERICA CONTINENT > NORTH AMERICA > UNITED STATES OF AMERICA > OREGON VERTICAL LOCATION > LAND SURFACE LIDAR > Light Detection and Ranging Airplane > Airplane Diamond Lake National Forest (GIP) Product: Classified lidar point cloud The United States Forest Service, Region 6, (USFS) required leaf-on airborne lidar surveys to be collected over of national forestry in Oregon and Washington State. The following areas were requested to be covered: Gifford Pinchot National Forest (GIP) in Vancouver, Washington; Okanogan-Wenatchee National Forest (OKA) in Wenatchee, Washington; Malheur National Forest (MAL) in John Day, Oregon; Deschutes National Forest (DES) in Bend, Oregon, Willamette National Forest (WIL) in Eugene, Oregon, Umpqua National Forest (UMP) in Douglas, Lane, and Jackson Counties, Oregon. The following report applies to the Diamond Lake AOI, which encompasses three hundred twenty three (323) square miles of the Umpqua National Forest in Oregon. Aerial lidar data for this task order was planned, acquired, processed and produced at an aggregate nominal pulse spacing (ANPS) of 0.35 meters and aggregate nominal pulse density of 8 pulses per square meter. OCM Partners OCM Partners https://www.fisheries.noaa.gov/inport/item/69900 https://www.fisheries.noaa.gov/inport/item/49401 https://www.fisheries.noaa.gov/inport/item/69916 northlimit=43.411244; eastlimit=-121.966923; southlimit=43.081089; westlimit=-122.432038; start=2017-07-07; end=2017-07-14; None 2023-05-11