2008 Coastal California JALBTCX Natural Color Imagery

Create custom data files by choosing area, map projection, file format, etc.

Simple download of data files.

Date that the source FGDC record was last modified.

Converted from FGDC Content Standard for Digital Geospatial Metadata (version FGDC-STD-001-1998) using 'fgdc_to_inport_xml.pl' script. Contact Tyler Christensen (NOS) for details.

Partial upload of Positional Accuracy fields only.

Partial upload to move data access links to Distribution Info.

EarthData utilized an InfoTerra Pixel Factory workflow for processing the aerotriangulation for the orthoimagery covering the project area. The airborne GPS data was processed and integrated with the inertial measurement unit (IMU). The resulting imagery and control were imported into the InfoTerra Pixel Factory system for use in the aerotriangulation. The ADS40 imagery was downloaded onto the EarthData server and brought over to the UNIX basedInfoTerra Pixel Factory system. The ground control was used in conjunction with the processed airborne global positioning system (ABGPS) results for the aerotriangulation. The ground control points were read in all available imagery and tie points between flight lines were selected. A fully analytical bundle adjustment was run. The properly formatted InfoTerra Pixel Factory results were used for subsequent processing. All final results were output into an AT report which is being delivered with the final orthoimagery."

InfoTerra Pixel Factory was used in the processing of the DSM for orthorectification of the imagery covering the Orchard Hills Training Site, Idaho project area. InfoTerra Pixel Factory digital surface modeling is based on an auto correlated pixel-matching system within the InfoTerra Pixel Factory software. The auto correlated digital surface model (DSM) surface represents the initial surface model. The following is the process used. 1. Using the DSM InfoTerra Pixel Factory data set created, the technician performed a visual inspection of the data to verify that the flight lines met correctly. The technician also verified that there were no voids, and that the data covered the project limits. The technician then selected a series of areas from the dataset and inspected them where adjacent flight lines met. 2. This DSM surface is used in the rectification of the orthoimagery.

The digital orthophotography is comprised of 24 bit natural color RGB bands and a 0.30 meter pixel resolution ground orthos for the project area. The InfoTerra Pixel Factory was used in the generation of the orthoimagery covering all project tiles. The radiometric adjustments and color balancing were performed on the raw 16 bit format imagery for each flight line prior to the import to the Pixel Factory. FEDI uses proprietary software developed specifically to adjust the radiometry of the imagery of the push broom three lines scanner such as the ADS40. The rectification process was then run using the processed DSM surface and the radiometrically balanced imagery on each flight line. The quicklook (reduced resolution rectification) ortho for all flight lines then used to generate the automatic mosaic lines. . which were placed, to mosaic the full resolution ortho of the ADS40 imagery strips. An initial QA/QC was performed by the technician to ensure that the mosaic lines were appropriately placed and that there was appropriate imagery coverage. The final imagery data set is removed from the InfoTerra environment in a process called """"packaging"""" where the individual tiles are created. All data processing in the InfoTerra system is performed in UTM meters; it is during packaging that final datum and projection are defined. The created tiles are reviewed again for anomalies and interactive radiometric adjustment applied where needed. QA/QC was performed looking for anomalies, smears and other indications of problems within the digital Orthophoto creation process, interactive radiometric adjustment applied where needed. Two additional radiometric adjustments are applied to the completed orthos in Adobe Photoshop. The first is a sharpening mask filter; this filter is used to help increase sharpness of a digital image. The basis for this filter is to locate pixels that differ in value from surrounding pixels by the threshold specified. It then increases the pixels' contrast by the value identified. For neighboring pixels specified by the threshold, the lighter pixels get even lighter and the darker pixels get even darker based on the specified amount. The changes made maintained the integrity of the original histogram curve.