2002 Long Island South Shore Estuary Benthic Habitat Polygon Data Set Geoform
Data Set (DS) | Office for Coastal Management (OCM)GUID: gov.noaa.nmfs.inport:47940 | Updated: May 30, 2023 | Published / External
Summary
Short Citation
Office for Coastal Management, 2024: 2002 Long Island South Shore Estuary Benthic Habitat Polygon Data Set Geoform, https://www.fisheries.noaa.gov/inport/item/47940.
Full Citation Examples
In June 2002, 200 1:20,000 scale conventional-color metric film diapositives for Long Island, New York were collected as part of an effort to map submerged aquatic vegetation (SAV) in Long Islands South Shore bays. They were provided by New York State Department of State's Division of Coastal Resources. Photographs were taken at low tide and during times that the growth stage of the SAV allowed for clear identification. Care was taken to minimize the effects of turbidity, sun glint, wind, and haze on the photos. The photos were scanned at a resolution of 15 microns. Ground control points were collected primarily from NYSDS 2 ft orthophotos. Additional control points were collected from USGS DOQQs where coverage from the primary source was lacking. All elevations were derived from USGS digital elevation models. A bundle block adjustment was performed using Albany and exterior orientation parameters were calculated. Boeing/Autometric's Softplotter was used to orthorectify the photos. The images were then dodged and mosaicked using Z/I's Orthopro. No additional color-balancing was performed as the mosaic's intended purpose was the delineation of benthic habitats. The mosaic was then output into 1000m by 1000m tiles with a 0.5m pixel resolution. The naming convention uses the first 3 numbers of the UTM x coordinate followed by the first 4 numbers in the UTM y coordinate of the southwest corner. Stereo digital images were created and the habitat features were interpreted and digitized on screen using softplotter microstation resulting in accurate and efficient 3D extraction of the data. Habitats were delineated with a high level of detail with the minimum mapping unit (MMU) being 0.01 hectares(approx.10m x 10m).The digitized polygons have the following specifications: Vertex Distance less than 1.0 m Node Snap Distance less than 4.0 m Arc Snap Distance less than 4.0 m During August 2002, NOAA staff collected 95 field observations throughout the study area and this information was incorporated into the map. In June 2003, after reviewing the photography, questionable areas were visited by Greenhorne and O'Mara staff and the findings were subsequently applied to the map. The map layers show delineated polygons and lines representing benthic habitat data. Each polygon feature is given a 1,2,3 or 4 digit number representing 11 habitats. The item numbers are stored in the attribute table under Text. The benthic data is classified according to the System for Classification of Habitats in Estuarine and Marine Environments (SCHEME). This system is fully described in "Development of a System for Classification of Habitats in Estuarine and Marine Environments (SCHEME) for Florida, Report to U.S. EPA - Gulf of Mexico Program, Florida Fish and Wildlife Conservation Commission, Florida Marine Research Institute. Review Draft 12/04/02."The collected data was converted to an ARCGIS format for quality control and delivery. The data was assessed for horizontal spatial accuracy and thematic agreement during 2003.
Original contact information:
Contact Org: NOAA Office for Coastal Management
Phone: 843-740-1202
Email: coastal.info@noaa.gov
Distribution Information
-
FTP download of data files.
Data is available upon request
None
Controlled Theme Keywords
BENTHIC, COASTAL, environment, ESTUARY
Child Items
Type | Title |
---|---|
Entity | Geoform |
Contact Information
Point of Contact
NOAA Office for Coastal Management (NOAA/OCM)
coastal.info@noaa.gov
(843) 740-1202
https://coast.noaa.gov
Metadata Contact
NOAA Office for Coastal Management (NOAA/OCM)
coastal.info@noaa.gov
(843) 740-1202
https://coast.noaa.gov
Extents
-73.751901° W,
-72.411823° E,
40.906952° N,
40.563308° S
2002
Item Identification
Title: | 2002 Long Island South Shore Estuary Benthic Habitat Polygon Data Set Geoform |
---|---|
Short Name: | ny_liss02_p-geoform_Metadata |
Status: | Completed |
Publication Date: | 2015 |
Abstract: |
In June 2002, 200 1:20,000 scale conventional-color metric film diapositives for Long Island, New York were collected as part of an effort to map submerged aquatic vegetation (SAV) in Long Islands South Shore bays. They were provided by New York State Department of State's Division of Coastal Resources. Photographs were taken at low tide and during times that the growth stage of the SAV allowed for clear identification. Care was taken to minimize the effects of turbidity, sun glint, wind, and haze on the photos. The photos were scanned at a resolution of 15 microns. Ground control points were collected primarily from NYSDS 2 ft orthophotos. Additional control points were collected from USGS DOQQs where coverage from the primary source was lacking. All elevations were derived from USGS digital elevation models. A bundle block adjustment was performed using Albany and exterior orientation parameters were calculated. Boeing/Autometric's Softplotter was used to orthorectify the photos. The images were then dodged and mosaicked using Z/I's Orthopro. No additional color-balancing was performed as the mosaic's intended purpose was the delineation of benthic habitats. The mosaic was then output into 1000m by 1000m tiles with a 0.5m pixel resolution. The naming convention uses the first 3 numbers of the UTM x coordinate followed by the first 4 numbers in the UTM y coordinate of the southwest corner. Stereo digital images were created and the habitat features were interpreted and digitized on screen using softplotter microstation resulting in accurate and efficient 3D extraction of the data. Habitats were delineated with a high level of detail with the minimum mapping unit (MMU) being 0.01 hectares(approx.10m x 10m).The digitized polygons have the following specifications: Vertex Distance less than 1.0 m Node Snap Distance less than 4.0 m Arc Snap Distance less than 4.0 m During August 2002, NOAA staff collected 95 field observations throughout the study area and this information was incorporated into the map. In June 2003, after reviewing the photography, questionable areas were visited by Greenhorne and O'Mara staff and the findings were subsequently applied to the map. The map layers show delineated polygons and lines representing benthic habitat data. Each polygon feature is given a 1,2,3 or 4 digit number representing 11 habitats. The item numbers are stored in the attribute table under Text. The benthic data is classified according to the System for Classification of Habitats in Estuarine and Marine Environments (SCHEME). This system is fully described in "Development of a System for Classification of Habitats in Estuarine and Marine Environments (SCHEME) for Florida, Report to U.S. EPA - Gulf of Mexico Program, Florida Fish and Wildlife Conservation Commission, Florida Marine Research Institute. Review Draft 12/04/02."The collected data was converted to an ARCGIS format for quality control and delivery. The data was assessed for horizontal spatial accuracy and thematic agreement during 2003. Original contact information: Contact Org: NOAA Office for Coastal Management Phone: 843-740-1202 Email: coastal.info@noaa.gov |
Purpose: |
At the urging of Long Island citizens, the New York State Legislature passed the Long Island South Shore Estuary Reserve Act in 1993. The Act recognized the South Shore Estuary as an unparalleled resource and provided for development of a Comprehensive Management Plan (CMP) to improve and protect the health of the estuary's ecosystem while increasing public access opportunities and sustaining economic activities. The Act also created a South Shore Estuary Reserve Council to prepare the plan and promote its implementation. The Council represents local governments, commercial and recreational fishing businesses, business associations, conservation and scientific organizations, education institutions and three State agencies including the New York State Department of State?s Division of Coastal Resources.One of the critical needs identified by the CMP is a baseline inventory of Submerged Aquatic Vegetation (SAV) resources, one of the Reserve?s most important living marine resources. Following the establishment of a comprehensive baseline SAV data set, the CMP calls for a long term monitoring program The monitoring will be designed to evaluate the level of success in attainment of specific site goals and the cumulative achievement of projected improvements in estuarine resources from habitat restoration and protection activities. The ultimate goal is to support productivity of commercially and ecologically important estuarine species by sustaining existing habitats of high functional quality and restoring degraded habitats. This data set will serve as the baseline inventory of benthic habitats for the Reserve. |
Notes: |
10096 |
Supplemental Information: |
The study area covers approximately 443 km2 from the west end of Long Beach Island in Nassau County to Heady Creek at the east end of Shinnecock Bay in Suffolk County. |
Keywords
Theme Keywords
Thesaurus | Keyword |
---|---|
Global Change Master Directory (GCMD) Science Keywords |
EARTH SCIENCE > BIOSPHERE > ECOSYSTEMS > MARINE ECOSYSTEMS > BENTHIC
|
Global Change Master Directory (GCMD) Science Keywords |
EARTH SCIENCE > BIOSPHERE > ECOSYSTEMS > MARINE ECOSYSTEMS > COASTAL
|
Global Change Master Directory (GCMD) Science Keywords |
EARTH SCIENCE > BIOSPHERE > ECOSYSTEMS > MARINE ECOSYSTEMS > ESTUARY
|
ISO 19115 Topic Category |
environment
|
UNCONTROLLED | |
None | benthic data |
None | benthic mapping |
None | CMECS |
None | Coastal and Marine Ecological Classification Standard |
None | Environmental Monitoring |
None | Geoform Component |
None | geographic information system |
None | GIS |
None | OCM Benthic Habitat Mapping |
None | SAV |
None | submerged aquatic vegetation |
Spatial Keywords
Thesaurus | Keyword |
---|---|
Global Change Master Directory (GCMD) Location Keywords |
CONTINENT > NORTH AMERICA > UNITED STATES OF AMERICA > NEW YORK
|
UNCONTROLLED | |
None | Long Island South Shore Estuary Reserve |
None | New York |
None | United States |
Physical Location
Organization: | Office for Coastal Management |
---|---|
City: | Charleston |
State/Province: | SC |
Data Set Information
Data Set Scope Code: | Data Set |
---|---|
Maintenance Frequency: | As Needed |
Data Presentation Form: | Map (digital) |
Distribution Liability: |
NOAA provides no warranty, nor accepts any liability occurring from any incomplete, incorrect, or misleading data, or from any incorrect, incomplete, or misleading use of the data. It is the responsibility of the user to determine whether or not the data is suitable for the intended purpose. |
Support Roles
Data Steward
Date Effective From: | 2015 |
---|---|
Date Effective To: | |
Contact (Organization): | NOAA Office for Coastal Management (NOAA/OCM) |
Address: |
2234 South Hobson Ave Charleston, SC 29405-2413 |
Email Address: | coastal.info@noaa.gov |
Phone: | (843) 740-1202 |
URL: | https://coast.noaa.gov |
Distributor
Date Effective From: | 2015 |
---|---|
Date Effective To: | |
Contact (Organization): | NOAA Office for Coastal Management (NOAA/OCM) |
Address: |
2234 South Hobson Ave Charleston, SC 29405-2413 |
Email Address: | coastal.info@noaa.gov |
Phone: | (843) 740-1202 |
URL: | https://coast.noaa.gov |
Metadata Contact
Date Effective From: | 2015 |
---|---|
Date Effective To: | |
Contact (Organization): | NOAA Office for Coastal Management (NOAA/OCM) |
Address: |
2234 South Hobson Ave Charleston, SC 29405-2413 |
Email Address: | coastal.info@noaa.gov |
Phone: | (843) 740-1202 |
URL: | https://coast.noaa.gov |
Point of Contact
Date Effective From: | 2015 |
---|---|
Date Effective To: | |
Contact (Organization): | NOAA Office for Coastal Management (NOAA/OCM) |
Address: |
2234 South Hobson Ave Charleston, SC 29405-2413 |
Email Address: | coastal.info@noaa.gov |
Phone: | (843) 740-1202 |
URL: | https://coast.noaa.gov |
Extents
Currentness Reference: | Ground Condition |
---|
Extent Group 1
Extent Group 1 / Geographic Area 1
W° Bound: | -73.751901 | |
---|---|---|
E° Bound: | -72.411823 | |
N° Bound: | 40.906952 | |
S° Bound: | 40.563308 |
Extent Group 1 / Time Frame 1
Time Frame Type: | Discrete |
---|---|
Start: | 2002 |
Spatial Information
Spatial Representation
Representations Used
Vector: | Yes |
---|
Vector Representation 1
Complex Object Present?: | Yes |
---|---|
Complex Object Count: | 963 |
Access Information
Security Class: | Unclassified |
---|---|
Data Access Constraints: |
Data is available upon request |
Data Use Constraints: |
None |
Distribution Information
Distribution 1
Download URL: | ftp://ftp.coast.noaa.gov/pub/benthic/Benthic_Cover_Data/NY_LongIslandSouthShore.zip |
---|---|
Distributor: | |
File Name: | Bulk Download |
Description: |
FTP download of data files. |
URLs
URL 1
URL: | https://iocm.noaa.gov/cmecs |
---|---|
Name: | CMECS Home Page |
URL Type: |
Online Resource
|
Description: |
Information and resources on the CMECS standard and how to apply it |
URL 2
URL: | http://www.cmecscatalog.org/ |
---|---|
Name: | CMECS Catalog |
URL Type: |
Online Resource
|
Description: |
Searchable online catalog of CMECS units, descriptions, and source references |
URL 3
URL: | https://coast.noaa.gov/digitalcoast/ |
---|---|
Name: | NOAA's Office for Coastal Management (OCM) Digital Coast Data section |
URL Type: |
Online Resource
|
Description: |
The website provides not only coastal data, but also the tools, training, and information needed to make these data truly useful. Content comes from many sources, all of which are vetted by NOAA. |
URL 4
URL: | https://coast.noaa.gov/ |
---|---|
Name: | NOAA's Office for Coastal Management (OCM) website |
URL Type: |
Online Resource
|
Description: |
Information on the NOAA Office for Coastal Management (OCM) |
URL 5
URL: | https://coast.noaa.gov/data/Images/Collections/BenthicCover_thumbnail.jpg |
---|---|
Name: | Browse Graphic |
URL Type: |
Browse Graphic
|
File Resource Format: | JPEG |
Description: |
Sample of benthic cover data |
Activity Log
Activity Log 1
Activity Date/Time: | 2017-03-30 |
---|---|
Description: |
Date that the source FGDC record was last modified. |
Activity Log 2
Activity Date/Time: | 2017-11-14 |
---|---|
Description: |
Converted from FGDC Content Standard for Digital Geospatial Metadata (version FGDC-STD-001-1998) using 'fgdc_to_inport_xml.pl' script. Contact Tyler Christensen (NOS) for details. |
Activity Log 3
Activity Date/Time: | 2018-02-08 |
---|---|
Description: |
Partial upload of Positional Accuracy fields only. |
Activity Log 4
Activity Date/Time: | 2018-04-11 |
---|---|
Description: |
Partial upload to move data access FTP links to Distribution Info and remove broken URLs. |
Data Quality
Accuracy: |
A quality control inspection of the polygon labels was manually and digitally performed. A quality control AML verified that there are no unattributed polygons, label errors, node errors or invalid codes found in the coverage.Thematic accuracy assessment methods: The thematic accuracy of the benthic habitat data set was assessed via sampling of 99 field points generated through a random selection process. This was accomplished by randomly selecting ten percent of the polygons in each class of interest at the two digit SCHEME classification level ? Unconsolidated bottom, Submerged Rooted Vascular (SRV or SAV), and Algae. The random point generation was accomplished using the MILA extension in ESRI ArcView 3.X. The point generation process used the entire polygon as the sample unit. The actual geographic coordinate is derived from the polygon centroid. These points are then used as the target to navigate to in the field. Due to depth limitations, the actual centroid coordinate is often not accessible. In these cases, a representative area is surveyed as far into the polygon, from the deep edge into the shallows toward shore, as is possible. Navigation to each field point is accomplished using a digital NOAA nautical chart, real time Wide Area Augmentation System (WAAS) differentiated GPS (Garmin 76 unit) and a ruggedized field lap top PC. The PC displays the chart of the area with each ?target? point as well as a real time symbol display of the boat location via the GPS. This system allows navigation precisely to the ?target? point.The field observation of habitat type at each point was conducted in one of two ways. In shallow or extremely clear water direct observations were made from the boat. In deeper areas or areas of unclear water a towed underwater video camera was deployed. The camera provides a live video feed to a monitor. The camera is towed long enough (~2-4 minutes) at each station to provide a complete assessment of the dominate habitat type. The ?field? classes were recorded to at least the two digit SCHEME classification level and where possible to the three digit level.The ?field? classification for each point is compared to the ?lab? classification of each point in an error matrix. The resulting accuracy at the 2 digit SCHEME classification code level is 87%. At the 3 digit SCHEME classification code level the accuracy is 80%. |
---|---|
Horizontal Positional Accuracy: |
The accuracy of this digital data is based on the compilation from the georeferenced scanned images. The digital boundary in respect to the scanned images exceeds the 1:24000 scale National Map Accuracy Standards. The horizontal accuracy was assessed according to the FGDC National Standard for Spatial Data Accuracy (NSSDA) methodology. This approach compares the Root Mean Square Error (RMSE) value for a set of paired points, one point from the test imagery and one point from a source of higher spatial accuracy, to verify the imagery has met the contract specifications. For this project, 20 spatial accuracy points were collected using a Trimble GeoExplorer 3 GPS at terrestrial features spaced throughout the study area. According to the NSSDA methodology, the polygonal boundaries are +/- 5.5 meters. |
Vertical Positional Accuracy: |
The accuracy of this digital data is based on the compilation from the georeferenced scanned images. The digital boundary in respect to the scanned images meet the 1:24000 scale National Map Accuracy Standards. |
Completeness Report: |
All polygons and lines have been digitized and labeled from the orthorectified geotiff images provided by Greenhorne and O'Mara,inc. Coded features were cross-referenced with the SCHEME (Florida System for Classification of habitats in Estuarine and Marine Environments). A quality control inspection has been performed to eliminate any missing or duplicate polygon labels in the coverage. All inconsistent data was corrected. Six images in flightline 2 (21, 23, 25, 27, 29, and 31) were not included in the AT solution because these frames consisted entirely of water. These images were warped using an affine transformation to be included in the mosaic. For 2 of the images (25 and 27) there were not enough photo-identifiable locations to accurately perform the affine transformation. The transformation was still attempted to prevent a hole in the mosaic. The accuracy for these images is unknown. The affected mosaic tiles are: 6584505, 6584506, 6594504-6594507, 6604505-6604507, 6614505-6614508, 6624506-6624508, 6634506-6634508, 6644506-6644508. |
Conceptual Consistency: |
The tests of logical consistency were performed using ESRI's ARC/INFO ARCGIS software. The dataset was built for internal arcs and polygons. The coverage has not been edited since the last build or clean. |
Lineage
Sources
2 ft orthophotos
Contact Name: | New York Department of State |
---|---|
Extent Type: | Discrete |
Extent Start Date/Time: | 1994-04 |
Source Contribution: |
Ground control points used for aerial triangulation solution. | Type of Source Media: CD-ROM |
Aerial Photography
Contact Name: | New York State Department of State Division of Coastal Resources |
---|---|
Extent Type: | Discrete |
Extent Start Date/Time: | 2002-06-03 |
Scale Denominator: | 20000 |
Citation URL: | http://cugir.mannlib.cornell.edu/ |
Source Contribution: |
Photos that were orthorectified | Source Geospatial Form: remote-sensing image | Type of Source Media: stable base material |
Digital Elevation Models
Contact Name: | USGS |
---|---|
Scale Denominator: | 24000 |
Citation URL: | http://cugir.mannlib.cornell.edu/ |
Source Contribution: |
Elevation information used for orthorectification and ground control for the photographs. | Type of Source Media: online |
Digital Ortho Quarter-Quads
Contact Name: | USGS |
---|---|
Source Contribution: |
Supplemental ground control points. | Type of Source Media: online |
Process Steps
Process Step 1
Description: |
Aerial Photography provided by New York State Department of State's Division of Coastal Resources. The photos were scanned at a resolution of 15 microns. Ground control points were collected primarily from NYSDS 2 ft orthophotos. Additional control points were collected from USGS DOQQs where coverage from the primary source was lacking. All elevations were derived from USGS digital elevation models. A bundle block adjustment was performed using Albany and exterior orientation parameters were calculated. Boeing/Autometric's Softplotter was used to orthorectify the photos. The images were then dodged and mosaicked using Z/I's Orthopro. No additional color-balancing was performed as the mosaic's intended purpose was the delineation of benthic habitats. The mosaic was then output into 1000m by 1000m tiles with a 0.5m pixel resolution. The naming convention uses the first 3 numbers of the UTM x coordinate followed by the first 4 numbers in the UTM y coordinate of the southwest corner. |
---|---|
Process Date/Time: | 2003-12-31 00:00:00 |
Process Step 2
Description: |
The data were converted from a single ESRI polygon shapefile classified according to the System for Classifying Habitats in Estuarine and Marine Environments (SCHEME) to the Coastal and Marine Ecological Classification Standard (CMECS) 2012 format (which can be found at https://coast.noaa.gov/digitalcoast/tools/cmecs-crosswalk) which produces separate geoform, geoform, and geoform feature layers from the original input benthic habitat dataset. This geoform feature layer contains CMECS geoform component attributes where an "Equal" or "Nearly Equal" SCHEME value was present in the original data. Polygons for which no geoform information was present have been removed. No other changes to the original polygon boundaries or any other alterations of the original SCHEME data were made during this process. |
---|---|
Process Date/Time: | 2015-01-01 00:00:00 |
Child Items
Rubric scores updated every 15m
Type | Title | |
---|---|---|
Entity | Geoform |
Catalog Details
Catalog Item ID: | 47940 |
---|---|
GUID: | gov.noaa.nmfs.inport:47940 |
Metadata Record Created By: | Anne Ball |
Metadata Record Created: | 2017-11-14 12:57+0000 |
Metadata Record Last Modified By: | SysAdmin InPortAdmin |
Metadata Record Last Modified: | 2023-05-30 18:09+0000 |
Metadata Record Published: | 2018-04-11 |
Owner Org: | OCM |
Metadata Publication Status: | Published Externally |
Do Not Publish?: | N |
Metadata Last Review Date: | 2018-04-11 |
Metadata Review Frequency: | 1 Year |
Metadata Next Review Date: | 2019-04-11 |