NOAA Office for Coastal Management Coastal Inundation Digital Elevation Model: San Francisco Bay/Monterey (CA) WFO - Santa Cruz and Monterey Counties
Data Set (DS) | Office for Coastal Management (OCM)GUID: gov.noaa.nmfs.inport:48047 | Updated: May 30, 2023 | Published / External
Summary
Short Citation
Office for Coastal Management, 2024: NOAA Office for Coastal Management Coastal Inundation Digital Elevation Model: San Francisco Bay/Monterey (CA) WFO - Santa Cruz and Monterey Counties, https://www.fisheries.noaa.gov/inport/item/48047.
Full Citation Examples
This digital elevation model (DEM) is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer. The DEMs created for this project were developed using the NOAA National Weather Service's Weather Forecast Office (WFO) boundaries. Because the WFO boundaries can cover large areas, the WFO DEM was divided into smaller DEMs to ensure more manageable file sizes. The San Francisco Bay/Monterey (CA) WFO DEM was split into three smaller DEMs. They are divided along county lines and are: 1. San Francisco Bay/Monterey (CA) WFO - Santa Cruz and Monterey Counties 2. San Francisco Bay/Monterey (CA) WFO - Contra Costa, San Francisco, Alameda, San Mateo, and Santa Clara Counties 3. San Francisco Bay/Monterey (CA) WFO - Sonoma, Marin, Napa, and Solano Counties This metadata record describes the DEM for the San Francisco Bay/Monterey (CA) WFO - Santa Cruz and Monterey Counties. The DEM includes the best available lidar data known to exist at the time of DEM creation for the coastal areas of Santa Cruz and Monterey counties, that met project specifications. The DEM is derived from LiDAR data collected for the California Coastal Conservancy, NOAA and the United States Geological Survey between 2009 and 2011. Hydrographic breaklines used in the creation of the DEM were obtained from the California Coastal Conservancy, NOAA or the USGS. The DEMs are hydro flattened such that water elevations are less than or equal to 0 meters. The DEM is referenced vertically to the North American Vertical Datum of 1988 (NAVD88) with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is approximately 5 meters.
Distribution Information
No Distributions available.
Access Constraints:None
The dataset is provided "as is," without warranty to its performance, merchantable state, or fitness for any particular purpose. The entire risk associated with the results and performance of this dataset is assumed by the user. This dataset should be used strictly as a planning reference and not for navigation, permitting, or other legal purposes.
Controlled Theme Keywords
DIGITAL ELEVATION/TERRAIN MODEL (DEM), elevation, FLOODING, SEA LEVEL CHANGES
Child Items
No Child Items for this record.
Contact Information
Point of Contact
NOAA Office for Coastal Management (NOAA/OCM)
coastal.info@noaa.gov
(843) 740-1202
https://coast.noaa.gov
Metadata Contact
NOAA Office for Coastal Management (NOAA/OCM)
coastal.info@noaa.gov
(843) 740-1202
https://coast.noaa.gov
Extents
-122.318827809° W,
-120.212872809° E,
37.2872617749° N,
35.7880417749° S
2009 - 2011
Item Identification
Title: | NOAA Office for Coastal Management Coastal Inundation Digital Elevation Model: San Francisco Bay/Monterey (CA) WFO - Santa Cruz and Monterey Counties |
---|---|
Short Name: | CA_MTR1_metadata |
Status: | Completed |
Publication Date: | 2012 |
Abstract: |
This digital elevation model (DEM) is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer. The DEMs created for this project were developed using the NOAA National Weather Service's Weather Forecast Office (WFO) boundaries. Because the WFO boundaries can cover large areas, the WFO DEM was divided into smaller DEMs to ensure more manageable file sizes. The San Francisco Bay/Monterey (CA) WFO DEM was split into three smaller DEMs. They are divided along county lines and are: 1. San Francisco Bay/Monterey (CA) WFO - Santa Cruz and Monterey Counties 2. San Francisco Bay/Monterey (CA) WFO - Contra Costa, San Francisco, Alameda, San Mateo, and Santa Clara Counties 3. San Francisco Bay/Monterey (CA) WFO - Sonoma, Marin, Napa, and Solano Counties This metadata record describes the DEM for the San Francisco Bay/Monterey (CA) WFO - Santa Cruz and Monterey Counties. The DEM includes the best available lidar data known to exist at the time of DEM creation for the coastal areas of Santa Cruz and Monterey counties, that met project specifications. The DEM is derived from LiDAR data collected for the California Coastal Conservancy, NOAA and the United States Geological Survey between 2009 and 2011. Hydrographic breaklines used in the creation of the DEM were obtained from the California Coastal Conservancy, NOAA or the USGS. The DEMs are hydro flattened such that water elevations are less than or equal to 0 meters. The DEM is referenced vertically to the North American Vertical Datum of 1988 (NAVD88) with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is approximately 5 meters. |
Purpose: |
The NOAA Office for Coastal Management has developed high-resolution digital elevation models (DEMs) for use in the Center's Sea Level Rise And Coastal Flooding Impacts internet mapping application. These DEMs serve as source datasets used to derive data to visualize the impacts of inundation resulting from sea level rise along the coastal United States and its territories. |
Notes: |
10904 |
Supplemental Information: |
The data used to construct this DEM are publicly available via the NOAA Office for Coastal Management's Digital Coast (www.coast.noaa.gov/lidar) or through the USGS CLICK. Further information regarding the lidar data can be accessed using the following url's: https://coast.noaa.gov/dataviewer/webfiles/metadata/ca2010_coastal_template.html https://coast.noaa.gov/dataviewer/webfiles/metadata/sfbay2010_template.html USGS CLICK: http://lidar.cr.usgs.gov/ Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Geographic: Latitude_Resolution: 0.0000001 Longitude_Resolution: 0.0000001 Geographic_Coordinate_Units: Decimal degrees Geodetic_Model: Horizontal_Datum_Name: North American Datum of 1983 Ellipsoid_Name: Geodetic Reference System 80 Semi-major_Axis: 6378137.000000 Denominator_of_Flattening_Ratio: 298.257222101 Vertical_Coordinate_System_Definition: Altitude_System_Definition: Altitude_Datum_Name: North American Vertical Datum of 1988 Altitude_Resolution: 0.001 Altitude_Distance_Units: meters Altitude_Encoding_Method: Explicit elevation coordinate included with horizontal coordinates |
Keywords
Theme Keywords
Thesaurus | Keyword |
---|---|
Global Change Master Directory (GCMD) Science Keywords |
EARTH SCIENCE > LAND SURFACE > GEOMORPHIC LANDFORMS/PROCESSES > COASTAL PROCESSES > FLOODING
|
Global Change Master Directory (GCMD) Science Keywords |
EARTH SCIENCE > LAND SURFACE > GEOMORPHIC LANDFORMS/PROCESSES > COASTAL PROCESSES > SEA LEVEL CHANGES
|
Global Change Master Directory (GCMD) Science Keywords |
EARTH SCIENCE > LAND SURFACE > TOPOGRAPHY > TERRAIN ELEVATION > DIGITAL ELEVATION/TERRAIN MODEL (DEM)
|
ISO 19115 Topic Category |
elevation
|
UNCONTROLLED | |
None | Bathymetry/Topography |
None | DEM |
None | Digital Elevation Model |
None | elevation |
None | flooding |
None | inundation |
None | lidar |
None | sea level rise |
None | topography |
Spatial Keywords
Thesaurus | Keyword |
---|---|
Global Change Master Directory (GCMD) Location Keywords |
CONTINENT > NORTH AMERICA > UNITED STATES OF AMERICA > CALIFORNIA
|
UNCONTROLLED | |
None | California |
None | Monterey County |
None | Santa Cruz County |
None | US |
Physical Location
Organization: | Office for Coastal Management |
---|---|
City: | Charleston |
State/Province: | SC |
Data Set Information
Data Set Scope Code: | Data Set |
---|---|
Maintenance Frequency: | None Planned |
Data Presentation Form: | Image (digital) |
Distribution Liability: |
Any conclusions drawn from the analysis of this information are not the responsibility of the the Office for Coastal Management or its partners. |
Data Set Credit: | Acknowledgment of the NOAA Office for Coastal Management as a data source would be appreciated in products developed from these data, and such acknowledgment as is standard for citation and legal practices for data source is expected. |
Support Roles
Data Steward
Date Effective From: | 2012 |
---|---|
Date Effective To: | |
Contact (Organization): | NOAA Office for Coastal Management (NOAA/OCM) |
Address: |
2234 South Hobson Ave Charleston, SC 29405-2413 |
Email Address: | coastal.info@noaa.gov |
Phone: | (843) 740-1202 |
URL: | https://coast.noaa.gov |
Distributor
Date Effective From: | 2012 |
---|---|
Date Effective To: | |
Contact (Organization): | NOAA Office for Coastal Management (NOAA/OCM) |
Address: |
2234 South Hobson Ave Charleston, SC 29405-2413 |
Email Address: | coastal.info@noaa.gov |
Phone: | (843) 740-1202 |
URL: | https://coast.noaa.gov |
Metadata Contact
Date Effective From: | 2012 |
---|---|
Date Effective To: | |
Contact (Organization): | NOAA Office for Coastal Management (NOAA/OCM) |
Address: |
2234 South Hobson Ave Charleston, SC 29405-2413 |
Email Address: | coastal.info@noaa.gov |
Phone: | (843) 740-1202 |
URL: | https://coast.noaa.gov |
Point of Contact
Date Effective From: | 2012 |
---|---|
Date Effective To: | |
Contact (Organization): | NOAA Office for Coastal Management (NOAA/OCM) |
Address: |
2234 South Hobson Ave Charleston, SC 29405-2413 |
Email Address: | coastal.info@noaa.gov |
Phone: | (843) 740-1202 |
URL: | https://coast.noaa.gov |
Extents
Currentness Reference: | Ground Condition |
---|
Extent Group 1
Extent Group 1 / Geographic Area 1
W° Bound: | -122.318827809 | |
---|---|---|
E° Bound: | -120.212872809 | |
N° Bound: | 37.2872617749 | |
S° Bound: | 35.7880417749 |
Extent Group 1 / Time Frame 1
Time Frame Type: | Range |
---|---|
Start: | 2009 |
End: | 2011 |
Spatial Information
Spatial Representation
Representations Used
Grid: | Yes |
---|
Grid Representation 1
Dimension Count: | 3 | ||||
---|---|---|---|---|---|
Cell Geometry: | Area | ||||
Transformation Parameters Available?: | No | ||||
Axis Dimension 1 |
|||||
|
|||||
Axis Dimension 2 |
|||||
|
|||||
Axis Dimension 3 |
|||||
|
Access Information
Security Class: | Unclassified |
---|---|
Data Access Constraints: |
None |
Data Use Constraints: |
The dataset is provided "as is," without warranty to its performance, merchantable state, or fitness for any particular purpose. The entire risk associated with the results and performance of this dataset is assumed by the user. This dataset should be used strictly as a planning reference and not for navigation, permitting, or other legal purposes. |
URLs
URL 1
URL: | https://coast.noaa.gov/slr |
---|---|
URL Type: |
Online Resource
|
URL 2
URL: | https://coast.noaa.gov/digitalcoast/tools/slr |
---|---|
URL Type: |
Online Resource
|
URL 3
URL: | https://coast.noaa.gov/ |
---|---|
URL Type: |
Online Resource
|
Activity Log
Activity Log 1
Activity Date/Time: | 2016-05-23 |
---|---|
Description: |
Date that the source FGDC record was last modified. |
Activity Log 2
Activity Date/Time: | 2017-11-14 |
---|---|
Description: |
Converted from FGDC Content Standards for Digital Geospatial Metadata (version FGDC-STD-001-1998) using 'fgdc_to_inport_xml.pl' script. Contact Tyler Christensen (NOS) for details. |
Activity Log 3
Activity Date/Time: | 2018-02-08 |
---|---|
Description: |
Partial upload of Positional Accuracy fields only. |
Data Quality
Horizontal Positional Accuracy: |
The DEM is derived from the source lidar data. Horizontal accuracy testing is not performed on the DEM. Lidar source data assumed to meet 1 meter horizontal accuracy. |
---|---|
Vertical Positional Accuracy: |
The DEM is derived from the source lidar data. Vertical accuracy is not tested on the DEM. Project specifications require all source lidar data used in constructing the DEM to meet FEMA Specifications for Flood Hazard Mapping. |
Completeness Report: |
A visual qualitative check was performed to ensure data completeness. All available lidar data known at the time of DEM creation that meets project specifications has been used to develop the DEM. Known data gaps may exist where lidar coverage was incomplete. |
Conceptual Consistency: |
Data covers the project area, defined as the WFO boundary. Elevation data checked for anomalous elevation values outside expected range. |
Lineage
Sources
NOAA Office for Coastal Management lidar data holdings
Contact Name: | NOAA Office for Coastal Management |
---|---|
Publish Date: | 2012-01-01 |
Extent Type: | Range |
Extent Start Date/Time: | 2009 |
Extent End Date/Time: | 2011 |
Citation URL: | https://coast.noaa.gov/dataviewer/ |
Source Contribution: |
Lidar points covering portions of Santa Cruz and Monterey counties were used in developing the DEM. | Type of Source Media: online digital data |
USGS CLICK lidar data holdings
Contact Name: | USGS Center for LiDAR Information Coordination and Knowledge |
---|---|
Publish Date: | 2010-01-01 |
Extent Type: | Discrete |
Extent Start Date/Time: | 2010 |
Citation URL: | http://lidar.cr.usgs.gov/ |
Source Contribution: |
Lidar points covering portions of Santa Cruz and Monterey counties were used in developing the DEM. | Type of Source Media: online digital data |
Process Steps
Process Step 1
Description: |
1. Lidar source data and hydrographic breaklines were obtained and imported into an ESRI ArcGIS file geodatabase for each constituent county within the WFO boundary. Ground classified points (Class 2) and those classified as mudflats (Class 10; project specific to CCC data) were used to reflect a bare earth surface. Hydrographic features were assigned elevation values at or below 0 meters. An ESRI Terrain was then generated from these source data. 2. The ESRI Terrain was converted to a DEM (Erdas Imagine .img file format) with a cell size of 3 meters. The DEM was reviewed in Global Mapper for incorrect elevations and artifacts introduced from source inputs or during the raster creation process. Corrections were applied to the DEM and reprocessed for further review. 3. All DEMs for the entire study area (WFO) were loaded into Global Mapper for a final review. The constituent DEMs were then checked to ensure complete coverage within the study area and that no issues existed along the boundary between adjacent DEMs. Once it was determined all DEMs were seamlessly edge-matched and no other artifacts were present, the constituent DEMs were mosaiced together, resampled to 5m and reprojected to the NAD83 geographic coordinate system. |
---|---|
Process Date/Time: | 2011-01-01 00:00:00 |
Source: | NOAA Office for Coastal Management lidar data holdings |
Catalog Details
Catalog Item ID: | 48047 |
---|---|
GUID: | gov.noaa.nmfs.inport:48047 |
Metadata Record Created By: | Anne Ball |
Metadata Record Created: | 2017-11-14 14:14+0000 |
Metadata Record Last Modified By: | SysAdmin InPortAdmin |
Metadata Record Last Modified: | 2023-05-30 18:09+0000 |
Metadata Record Published: | 2018-02-08 |
Owner Org: | OCM |
Metadata Publication Status: | Published Externally |
Do Not Publish?: | N |
Metadata Last Review Date: | 2018-02-08 |
Metadata Review Frequency: | 1 Year |
Metadata Next Review Date: | 2019-02-08 |