Search Help Show/Hide Menu
Summary
Item Identification
Keywords
Physical Location
Data Set Info
Support Roles
Extents
Spatial Info
Access Info
URLs
Activity Log
Data Quality
Lineage
Catalog Details

Summary

Short Citation
Office for Coastal Management, 2024: NOAA Office for Coastal Management Coastal Inundation Digital Elevation Model: San Francisco Bay/Monterey (CA) WFO - Contra Costa, San Francisco, Alameda, San Mateo, and Santa Clara Counties, https://www.fisheries.noaa.gov/inport/item/48048.
Full Citation Examples

Abstract

This digital elevation model (DEM) is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer. The DEMs created for this project were developed using the NOAA National Weather Service's Weather Forecast Office (WFO) boundaries. Because the WFO boundaries can cover large areas, the WFO DEM was divided into smaller DEMs to ensure more manageable file sizes. The San Francisco Bay/Monterey (CA) WFO DEM was split into three smaller DEMs. They are divided along county lines and are: 1. San Francisco Bay/Monterey (CA) WFO - Santa Cruz and Monterey Counties 2. San Francisco Bay/Monterey (CA) WFO - Contra Costa, San Francisco, Alameda, San Mateo, and Santa Clara Counties 3. San Francisco Bay/Monterey (CA) WFO - Sonoma, Marin, Napa, and Solano Counties This metadata record describes the DEM for the San Francisco Bay/Monterey (CA) WFO - Contra Costa, San Francisco, Alameda, San Mateo, and Santa Clara Counties. The DEM includes the best available lidar data known to exist at the time of DEM creation for the coastal areas of Contra Costa, San Francisco, Alameda, San Mateo, and Santa Clara Counties, that met project specifications. The DEM is derived from LiDAR data collected for the California Coastal Conservancy, NOAA and the United States Geological Survey between 2009 and 2011. Hydrographic breaklines used in the creation of the DEM were obtained from the California Coastal Conservancy, NOAA or the USGS. The DEMs are hydro flattened such that water elevations are less than or equal to 0 meters. The DEM is referenced vertically to the North American Vertical Datum of 1988 (NAVD88) with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is approximately 5 meters.

Distribution Information

No Distributions available.

Access Constraints:

None

Use Constraints:

The dataset is provided "as is," without warranty to its performance, merchantable state, or fitness for any particular purpose. The entire risk associated with the results and performance of this dataset is assumed by the user. This dataset should be used strictly as a planning reference and not for navigation, permitting, or other legal purposes.

Controlled Theme Keywords

DIGITAL ELEVATION/TERRAIN MODEL (DEM), elevation, FLOODING, SEA LEVEL CHANGES

Child Items

No Child Items for this record.

Contact Information

Point of Contact
NOAA Office for Coastal Management (NOAA/OCM)
coastal.info@noaa.gov
(843) 740-1202
https://coast.noaa.gov

Metadata Contact
NOAA Office for Coastal Management (NOAA/OCM)
coastal.info@noaa.gov
(843) 740-1202
https://coast.noaa.gov

Extents

Geographic Area 1

-122.613440153° W, -121.025075153° E, 38.7373236235° N, 36.8932236235° S

Time Frame 1
2009 - 2011

Item Identification

Title: NOAA Office for Coastal Management Coastal Inundation Digital Elevation Model: San Francisco Bay/Monterey (CA) WFO - Contra Costa, San Francisco, Alameda, San Mateo, and Santa Clara Counties
Short Name: CA_MTR2_metadata
Status: Completed
Publication Date: 2012
Abstract:

This digital elevation model (DEM) is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer. The DEMs created for this project were developed using the NOAA National Weather Service's Weather Forecast Office (WFO) boundaries. Because the WFO boundaries can cover large areas, the WFO DEM was divided into smaller DEMs to ensure more manageable file sizes. The San Francisco Bay/Monterey (CA) WFO DEM was split into three smaller DEMs. They are divided along county lines and are: 1. San Francisco Bay/Monterey (CA) WFO - Santa Cruz and Monterey Counties 2. San Francisco Bay/Monterey (CA) WFO - Contra Costa, San Francisco, Alameda, San Mateo, and Santa Clara Counties 3. San Francisco Bay/Monterey (CA) WFO - Sonoma, Marin, Napa, and Solano Counties This metadata record describes the DEM for the San Francisco Bay/Monterey (CA) WFO - Contra Costa, San Francisco, Alameda, San Mateo, and Santa Clara Counties. The DEM includes the best available lidar data known to exist at the time of DEM creation for the coastal areas of Contra Costa, San Francisco, Alameda, San Mateo, and Santa Clara Counties, that met project specifications. The DEM is derived from LiDAR data collected for the California Coastal Conservancy, NOAA and the United States Geological Survey between 2009 and 2011. Hydrographic breaklines used in the creation of the DEM were obtained from the California Coastal Conservancy, NOAA or the USGS. The DEMs are hydro flattened such that water elevations are less than or equal to 0 meters. The DEM is referenced vertically to the North American Vertical Datum of 1988 (NAVD88) with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is approximately 5 meters.

Purpose:

The NOAA Office for Coastal Management has developed high-resolution digital elevation models (DEMs) for use in the Center's Sea Level Rise And Coastal Flooding Impacts internet mapping application. These DEMs serve as source datasets used to derive data to visualize the impacts of inundation resulting from sea level rise along the coastal United States and its territories.

Notes:

10905

Supplemental Information:

The data used to construct this DEM are publicly available via the NOAA Office for Coastal Management's Digital Coast (www.coast.noaa.gov/lidar) or through the USGS CLICK. Further information regarding the lidar data can be accessed using the following url's: https://coast.noaa.gov/dataviewer/webfiles/metadata/ca2010_coastal_template.html https://coast.noaa.gov/dataviewer/webfiles/metadata/sfbay2010_template.html USGS CLICK: http://lidar.cr.usgs.gov/

Spatial_Reference_Information:

Horizontal_Coordinate_System_Definition:

Geographic:

Latitude_Resolution: 0.0000001

Longitude_Resolution: 0.0000001

Geographic_Coordinate_Units: Decimal degrees

Geodetic_Model:

Horizontal_Datum_Name: North American Datum of 1983

Ellipsoid_Name: Geodetic Reference System 80

Semi-major_Axis: 6378137.000000

Denominator_of_Flattening_Ratio: 298.257222101

Vertical_Coordinate_System_Definition:

Altitude_System_Definition:

Altitude_Datum_Name: North American Vertical Datum of 1988

Altitude_Resolution: 0.001

Altitude_Distance_Units: meters

Altitude_Encoding_Method: Explicit elevation coordinate included with horizontal coordinates

Keywords

Theme Keywords

Thesaurus Keyword
Global Change Master Directory (GCMD) Science Keywords
EARTH SCIENCE > LAND SURFACE > GEOMORPHIC LANDFORMS/PROCESSES > COASTAL PROCESSES > FLOODING
Global Change Master Directory (GCMD) Science Keywords
EARTH SCIENCE > LAND SURFACE > GEOMORPHIC LANDFORMS/PROCESSES > COASTAL PROCESSES > SEA LEVEL CHANGES
Global Change Master Directory (GCMD) Science Keywords
EARTH SCIENCE > LAND SURFACE > TOPOGRAPHY > TERRAIN ELEVATION > DIGITAL ELEVATION/TERRAIN MODEL (DEM)
ISO 19115 Topic Category
elevation
UNCONTROLLED
None Bathymetry/Topography
None DEM
None Digital Elevation Model
None elevation
None flooding
None inundation
None lidar
None sea level rise
None topography

Spatial Keywords

Thesaurus Keyword
Global Change Master Directory (GCMD) Location Keywords
CONTINENT > NORTH AMERICA > UNITED STATES OF AMERICA > CALIFORNIA
UNCONTROLLED
None Alameda County
None California
None Contra Costa County
None San Francisco County
None San Mateo County
None Santa Clara County
None US

Physical Location

Organization: Office for Coastal Management
City: Charleston
State/Province: SC

Data Set Information

Data Set Scope Code: Data Set
Maintenance Frequency: None Planned
Data Presentation Form: Image (digital)
Distribution Liability:

Any conclusions drawn from the analysis of this information are not the responsibility of the the Office for Coastal Management or its partners.

Data Set Credit: Acknowledgment of the NOAA Office for Coastal Management as a data source would be appreciated in products developed from these data, and such acknowledgment as is standard for citation and legal practices for data source is expected.

Support Roles

Data Steward

CC ID: 618117
Date Effective From: 2012
Date Effective To:
Contact (Organization): NOAA Office for Coastal Management (NOAA/OCM)
Address: 2234 South Hobson Ave
Charleston, SC 29405-2413
Email Address: coastal.info@noaa.gov
Phone: (843) 740-1202
URL: https://coast.noaa.gov

Distributor

CC ID: 618119
Date Effective From: 2012
Date Effective To:
Contact (Organization): NOAA Office for Coastal Management (NOAA/OCM)
Address: 2234 South Hobson Ave
Charleston, SC 29405-2413
Email Address: coastal.info@noaa.gov
Phone: (843) 740-1202
URL: https://coast.noaa.gov

Metadata Contact

CC ID: 618120
Date Effective From: 2012
Date Effective To:
Contact (Organization): NOAA Office for Coastal Management (NOAA/OCM)
Address: 2234 South Hobson Ave
Charleston, SC 29405-2413
Email Address: coastal.info@noaa.gov
Phone: (843) 740-1202
URL: https://coast.noaa.gov

Point of Contact

CC ID: 618118
Date Effective From: 2012
Date Effective To:
Contact (Organization): NOAA Office for Coastal Management (NOAA/OCM)
Address: 2234 South Hobson Ave
Charleston, SC 29405-2413
Email Address: coastal.info@noaa.gov
Phone: (843) 740-1202
URL: https://coast.noaa.gov

Extents

Currentness Reference: Ground Condition

Extent Group 1

Extent Group 1 / Geographic Area 1

CC ID: 618123
W° Bound: -122.613440153
E° Bound: -121.025075153
N° Bound: 38.7373236235
S° Bound: 36.8932236235

Extent Group 1 / Time Frame 1

CC ID: 618122
Time Frame Type: Range
Start: 2009
End: 2011

Spatial Information

Spatial Representation

Representations Used

Grid: Yes

Grid Representation 1

CC ID: 618109
Dimension Count: 3
Cell Geometry: Area
Transformation Parameters Available?: No

Axis Dimension 1

Dimension Type: Row
Size: 40980

Axis Dimension 2

Dimension Type: Column
Size: 35297

Axis Dimension 3

Dimension Type: Vertical
Size: 1

Access Information

Security Class: Unclassified
Data Access Constraints:

None

Data Use Constraints:

The dataset is provided "as is," without warranty to its performance, merchantable state, or fitness for any particular purpose. The entire risk associated with the results and performance of this dataset is assumed by the user. This dataset should be used strictly as a planning reference and not for navigation, permitting, or other legal purposes.

URLs

URL 1

CC ID: 618114
URL: https://coast.noaa.gov/slr
URL Type:
Online Resource

URL 2

CC ID: 618115
URL: https://coast.noaa.gov/digitalcoast/tools/slr
URL Type:
Online Resource

URL 3

CC ID: 618116
URL: https://coast.noaa.gov/
URL Type:
Online Resource

Activity Log

Activity Log 1

CC ID: 618147
Activity Date/Time: 2016-05-23
Description:

Date that the source FGDC record was last modified.

Activity Log 2

CC ID: 618146
Activity Date/Time: 2017-11-14
Description:

Converted from FGDC Content Standards for Digital Geospatial Metadata (version FGDC-STD-001-1998) using 'fgdc_to_inport_xml.pl' script. Contact Tyler Christensen (NOS) for details.

Activity Log 3

CC ID: 717261
Activity Date/Time: 2018-02-08
Description:

Partial upload of Positional Accuracy fields only.

Data Quality

Horizontal Positional Accuracy:

The DEM is derived from the source lidar data. Horizontal accuracy testing is not performed on the DEM. Lidar source data assumed to meet 1 meter horizontal accuracy.

Vertical Positional Accuracy:

The DEM is derived from the source lidar data. Vertical accuracy is not tested on the DEM. Project specifications require all source lidar data used in constructing the DEM to meet FEMA Specifications for Flood Hazard Mapping.

Completeness Report:

A visual qualitative check was performed to ensure data completeness. All available lidar data known at the time of DEM creation that meets project specifications has been used to develop the DEM. Known data gaps may exist where lidar coverage was incomplete.

Conceptual Consistency:

Data covers the project area, defined as the WFO boundary. Elevation data checked for anomalous elevation values outside expected range.

Lineage

Sources

NOAA Office for Coastal Management lidar data holdings

CC ID: 618105
Contact Name: NOAA Office for Coastal Management
Publish Date: 2012-01-01
Extent Type: Range
Extent Start Date/Time: 2009
Extent End Date/Time: 2011
Citation URL: https://coast.noaa.gov/dataviewer/
Source Contribution:

Lidar points covering portions of San Francisco, San Mateo, Santa Clara, Alameda, and Contra Costa counties were used in developing the DEM. | Type of Source Media: online digital data

USGS CLICK lidar data holdings

CC ID: 618106
Contact Name: USGS Center for LiDAR Information Coordination and Knowledge
Publish Date: 2010-01-01
Extent Type: Discrete
Extent Start Date/Time: 2010
Citation URL: http://lidar.cr.usgs.gov/
Source Contribution:

Lidar points covering portions of San Francisco, San Mateo, Santa Clara, Alameda, and Contra Costa counties were used in developing the DEM. | Type of Source Media: online digital data

Process Steps

Process Step 1

CC ID: 618107
Description:

1. Lidar source data and hydrographic breaklines were obtained and imported into an ESRI ArcGIS file geodatabase for each constituent county within the WFO boundary. Ground classified points (Class 2) and those classified as mudflats (Class 10; project specific) were used to reflect a bare earth surface. Hydrographic features were assigned elevation values at or below 0 meters. An ESRI Terrain was then generated from these source data. 2. The ESRI Terrain was converted to a DEM (Erdas Imagine .img file format) with a cell size of 3 meters. The DEM was reviewed in Global Mapper for incorrect elevations and artifacts introduced from source inputs or during the raster creation process. Corrections were applied to the DEM and reprocessed for further review. 3. All DEMs for the entire study area (WFO) were loaded into Global Mapper for a final review. The constituent DEMs were then checked to ensure complete coverage within the study area and that no issues existed along the boundary between adjacent DEMs. Once it was determined all DEMs were seamlessly edge-matched and no other artifacts were present, the constituent DEMs were mosaiced together, resampled to 5m and reprojected to the NAD83 geographic coordinate system.

Process Date/Time: 2011-01-01 00:00:00
Source: NOAA Office for Coastal Management lidar data holdings

Catalog Details

Catalog Item ID: 48048
GUID: gov.noaa.nmfs.inport:48048
Metadata Record Created By: Anne Ball
Metadata Record Created: 2017-11-14 14:14+0000
Metadata Record Last Modified By: SysAdmin InPortAdmin
Metadata Record Last Modified: 2023-05-30 18:09+0000
Metadata Record Published: 2018-02-08
Owner Org: OCM
Metadata Publication Status: Published Externally
Do Not Publish?: N
Metadata Last Review Date: 2018-02-08
Metadata Review Frequency: 1 Year
Metadata Next Review Date: 2019-02-08