WEA_TerrainStats_dataset

This dataset depicts bathymetric zones at 90 m (3 arc-second) horizontal grid resolution in the MA WEA. This dataset was derived from a subset of U.S. Coastal Relief Model, provided by NOAA National Centers for Environmental Information, https://www.ngdc.noaa.gov/mgg/coastal/crm.htmlThis dataset was created using NOAA's Benthic Terrain Modeler v3.0 (https://coast.noaa.gov/digitalcoast/tools/btm). Parameters were as follows: 1. Build Fine Scale BPI, inner radius = 5, outer radius = 25. 2. Standardize BPI, 3. Calculate slope, 4. layers from steps 2 and 3 were integrated in the Zone Classification Builder Tool, standard deviation break = 1, slope value = 2.Bathymetric data sources include the U.S. National Ocean Service Hydrographic Database, the U.S. Geological Survey (USGS), the Monterey Bay Aquarium Research Institute, the U.S. Army Corps of Engineers, and various other academic institutions. Topographic data are from the USGS and the Shuttle Radar Topography Mission (SRTM). Volumes 3 through 5 also use bathymetric contours from the International Bathymetric Chart of the Caribbean Sea and the Gulf of Mexico project.

This dataset depicts bathymetric depth at 90 m (3 arc-second) horizontal grid resolution in the MA WEA. This dataset is a subset of U.S. Coastal Relief Model, provided by NOAA National Centers for Environmental Information, https://www.ngdc.noaa.gov/mgg/coastal/crm.html

This dataset depicts rugosity (terrain ruggedness, i.e. the variation in three-dimensional orientation of grid cells within a neighborhood) at 90 m (3 arc-second) horizontal grid resolution in the MA WEA. Rugosity was calculated using the Terrain Ruggedness tool (Benthic Terrain Modeler, https://coast.noaa.gov/digitalcoast/tools/btm).

This dataset depicts slope (percent rise) at 90 m (3 arc-second) horizontal grid resolution in the MA WEA This dataset was calculated using the Slope tool (3D Analyst) provided by NOAA National Centers for Environmental Information, https://www.ngdc.noaa.gov/mgg/coastal/crm.html.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This dataset depicts predicted surficial sediment mean grain size in the MA WEA and was generated from usSEABED: https://coastalmap.marine.usgs.gov/FlexWeb/national/usseabed/. The raw mean grain size data was kriged. Krig parameters: ordinary kriging, first order trend removal. This data set is a point coverage of known sediment samplings, inspections and probings from source data: usSEABED data collection. This data set represents theextracted (EXT) and parsed (PRS) output of the dbSEABED mining software. It contains the results of parsing descriptions in the data resources. The PRS data is less precise because it comes from word-based descriptions, but will include information on outsized elements, consolidation that are not usually in EXT data.

This dataset depicts bathymetric zones at 90 m (3 arc-second) horizontal grid resolution in the Mid-Atlantic. This dataset was derived from a subset of U.S. Coastal Relief Model, provided by NOAA National Centers for Environmental Information, https://www.ngdc.noaa.gov/mgg/coastal/crm.htmlThis dataset was created using NOAA's Benthic Terrain Modeler v3.0 (https://coast.noaa.gov/digitalcoast/tools/btm). Parameters were as follows: 1. Build Broad Scale BPI, inner radius = 5, outer radius = 25. 2. Standardize BPI, 3. Calculate slope, 4. layers from steps 2 and 3 wereintegrated in the Zone Classification Builder Tool, standard deviation break = 1, slope value = 2.Bathymetric data sources include the U.S. National Ocean Service Hydrographic Database, the U.S. Geological Survey (USGS), the Monterey Bay Aquarium Research Institute, the U.S. Army Corps of Engineers, and various other academic institutions. Topographic data are from the USGS and the Shuttle Radar Topography Mission (SRTM). Volumes 3 through 5 also use bathymetric contours from the International Bathymetric Chart of the Caribbean Sea and the Gulf of Mexico project.

This dataset depicts bathymetric depth at 90 m (3 arc-second) horizontal grid resolution in the NCKH WEA. This dataset is a subset of U.S. Coastal Relief Model, provided by NOAA National Centers for Environmental Information, https://www.ngdc.noaa.gov/mgg/coastal/crm.html.

This dataset depicts rugosity (terrain ruggedness, i.e. the variation in three-dimensional orientation of grid cells within a neighborhood) at 90 m (3 arc-second) horizontal grid resolution in the NCKH WEA. Rugosity was calculated using the Terrain Ruggedness tool (Benthic Terrain Modeler, https://coast.noaa.gov/digitalcoast/tools/btm).

This dataset depicts slope (percent rise) at 90 m (3 arc-second) horizontal grid resolution in the NCKH WEA This dataset was calculated using the Slope tool (3D Analyst) provided by NOAA National Centers for Environmental Information, https://www.ngdc.noaa.gov/mgg/coastal/crm.html.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This dataset depicts predicted surficial sediment mean grain size in the Mid-Atlantic and was generated from usSEABED: https://coastalmap.marine.usgs.gov/FlexWeb/national/usseabed/. The raw mean grain size data was kriged. Krig parameters: ordinary kriging, first order trend removal. This data set is a point coverage of known sediment samplings, inspections and probings from source data: usSEABED data collection. This data set represents theextracted (EXT) and parsed (PRS) output of the dbSEABED mining software. It contains the results of parsing descriptions in the data resources. The PRS data is less precise because it comes from word-based descriptions, but will include information on outsized elements, consolidation that are not usually in EXT data.

This dataset depicts bathymetric zones at 90 m (3 arc-second) horizontal grid resolution in the NJ WEA. This dataset was derived from a subset of U.S. Coastal Relief Model, provided by NOAA National Centers for Environmental Information, https://www.ngdc.noaa.gov/mgg/coastal/crm.html.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This dataset depicts bathymetric depth at 74 m horizontal grid resolution in the Mid-Atlantic. This dataset was created by kriging NOS Hydrographic Survey data (surveys with bathymetric attributed grids and surveys with digital sounding data): http://maps.ngdc.noaa.gov/viewers/bathymetry/. The following suveys were used: H09534, H09542, H09552, H09573, H11242, H11243, H11455, H114567. Output resolution is 1/2 the average nearest neighbor distance between input data points. Krig parameters: ordinary kriging, no trend removal.

This dataset depicts rugosity (terrain ruggedness, i.e. the variation in three-dimensional orientation of grid cells within a neighborhood) at 74 m (3 arc-second) horizontal grid resolution in the Mid-Atlantic. Rugosity was calculated using the Terrain Ruggedness tool (Benthic Terrain Modeler, https://coast.noaa.gov/digitalcoast/tools/btm), and a subset of U.S. Coastal Relief Model, provided by NOAA National Centers for Environmental Information, https://www.ngdc.noaa.gov/mgg/coastal/crm.html. A neighborhood value of 3 was used. Bathymetric data sources include the U.S. National Ocean Service Hydrographic Database, the U.S. Geological Survey (USGS), the Monterey Bay Aquarium Research Institute, the U.S. Army Corps of Engineers, and various other academic institutions. Topographic data are from the USGS and the Shuttle Radar Topography Mission (SRTM). Volumes 3 through 5 also use bathymetric contours from the International Bathymetric Chart of the Caribbean Sea and the Gulf of Mexico project.

This dataset depicts slope (percent rise) at 74 m (3 arc-second) horizontal grid resolution in the Mid-Atlantic. This dataset was calculated using the Slope tool (3D Analyst), and a subset of U.S. Coastal Relief Model, provided by NOAA National Centers for Environmental Information, https://www.ngdc.noaa.gov/mgg/coastal/crm.htmlBathymetric data sources include the U.S. National Ocean Service Hydrographic Database, the U.S. Geological Survey (USGS), the Monterey Bay Aquarium Research Institute, the U.S. Army Corps of Engineers, and various other academic institutions. Topographic data are from the USGS and the Shuttle Radar Topography Mission (SRTM). Volumes 3 through 5 also use bathymetric contours from the International Bathymetric Chart of the Caribbean Sea and the Gulf of Mexico project.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.

This data represents extracted (EXT) and parsed (PRS) outputs of the dbSEABED mining software.