RI021AA1_V
Entity (ENT) | Pacific Islands Fisheries Science Center (PIFSC)GUID: gov.noaa.nmfs.inport:63444 | Updated: August 9, 2022 | Published / External
-
View As
- Full List View
- Printable Form
- EXPORTS
- InPort XML
- View in Hierarchy
Summary
Crustacean Tagging and Morphometry data collected on NOAA R/V Townsend Cromwell cruises.
DescriptionCrustacean Tagging and Morphometry data collected on NOAA R/V Townsend Cromwell cruises.
Entity Information
Entity Type
Data Table
Data Attribute / Type | Description |
---|---|
DATASET_CODE
VARCHAR2 |
Source ID Code assigned by the data entry staff. |
VERSION_CODE
VARCHAR2 |
Code for the format version assigned by the data entry staff. |
VESSEL_CODE
VARCHAR2 |
Code for the vessel. |
CRUISE_NUMBER
VARCHAR2 |
Last two digits of the year of the cruise and two-digit incremental number of the cruise for the year. |
YEAR
VARCHAR2 |
Year of capture. |
MONTH
VARCHAR2 |
Month of capture. |
DAY
VARCHAR2 |
Day of capture. |
CAPTURE_STATION_NUMBER
VARCHAR2 |
Capture station number. |
CAPTURE_LATITUDE_DEGREES
VARCHAR2 |
Capture latitude degrees. Units for values are degrees. |
CAPTURE_LATITUDE_MINUTES
VARCHAR2 |
Capture latitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
CAPTURE_LATITUDE_DIRECTION
VARCHAR2 |
Capture latitude direction. |
CAPTURE_LATITUDE_DD
NUMERIC |
Computed capture latitude, in decimal degrees. Positive values are North latitudes; negative values are South latitudes. Units for values are degrees. Measures are reported with a precision of 40. |
CAPTURE_LONGITUDE_DEGREES
VARCHAR2 |
Capture longitude degrees. Units for values are degrees. |
CAPTURE_LONGITUDE_MINUTES
VARCHAR2 |
Capture longitude minutes, in tenths of a minute. During data entry the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
CAPTURE_LONGITUDE_DIRECTION
VARCHAR2 |
Capture longitude direction. |
CAPTURE_LONGITUDE_DD
NUMERIC |
Computed capture longitude, in decimal degrees. Positive values are East longitudes; negative values are West longitudes. Units for values are degrees. Measures are reported with a precision of 39. |
RELEASE_STATION_NUMBER
VARCHAR2 |
Release station number. |
RELEASE_LATITUDE_DEGREES
VARCHAR2 |
Release latitude degrees. Units for values are degrees. |
RELEASE_LATITUDE_MINUTES
VARCHAR2 |
Release latitude minutes, in tenths of a minute. During data entry the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
RELEASE_LATITUDE_DIRECTION
VARCHAR2 |
Release latitude direction. |
RELEASE_LATITUDE_DD
VARCHAR2 |
Computed release latitude, in decimal degrees. Positive values are North latitudes; negative values are South latitudes. Units for values are degrees. Measures are reported with a precision of 40. |
RELEASE_LONGITUDE_DEGREES
VARCHAR2 |
Release longitude degrees. Units for values are degrees. |
RELEASE_LONGITUDE_MINUTES
VARCHAR2 |
Release longitude minutes, in tenths of a minute. During data entry the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
RELEASE_LONGITUDE_DIRECTION
VARCHAR2 |
Release longitude direction. |
RELEASE_LONGITUDE_DD
VARCHAR2 |
Computed release longitude, in decimal degrees. Positive values are East longitudes; negative values are West longitudes. Units for values are degrees. Measures are reported with a precision of 39. |
STRING_NUMBER
VARCHAR2 |
The consecutive number of the string of traps. A string is an assembly of traps or pots attached to a mainline. If there is more than one string per station, each string should be numbered consecutively as they are retrieved. |
TRAP_NUMBER
VARCHAR2 |
The consecutive number assigned to gear (trap or pot) attached to a string. |
GEAR_CODE
VARCHAR2 |
Code for the type of gear used. |
LINE_NUMBER
VARCHAR2 |
A consecutive number for each entry on the collection form. |
SPECIES_CODE
VARCHAR2 |
Czm 10-digit species code. |
TAG_NUMBER
VARCHAR2 |
Tag number attached to the animal before release. |
CARAPACE_LENGTH
VARCHAR2 |
Carapace length, in hundredths of a millimeter. During data entry the decimal point was omitted; it has been inserted into the data. Units for values are millimeters. Measures are reported with a precision of 5. |
CARAPACE_WIDTH
VARCHAR2 |
Carapace width, in hundredths of a millimeter. During data entry the decimal point was omitted; it has been inserted into the data. Units for values are millimeters. Measures are reported with a precision of 5. |
TAIL_LENGTH
VARCHAR2 |
Tail length, in hundredths of a millimeter. During data entry the decimal point was omitted; it has been inserted into the data. Units for values are millimeters. Measures are reported with a precision of 5. |
TAIL_WIDTH
VARCHAR2 |
Tail width, in hundredths of a millimeter. During data entry the decimal point was omitted (00000 = 000.00). Units for values are millimeters. Measures are reported with a precision of 5. |
TOTAL_LENGTH
VARCHAR2 |
Total length, in hundredths of a millimeter. During data entry the decimal point was omitted; it has been inserted into the data. Units for values are millimeters. Measures are reported with a precision of 5. |
WEIGHT
VARCHAR2 |
Weight, in ten thousandths of a kilogram. During data entry the decimal point was omitted; it has been inserted into the data. Units for values are kilograms. Measures are reported with a precision of 6. |
SEX_CODE
VARCHAR2 |
Code for the sex of the species. |
BERRIED_OVA_COLOR_CODE
VARCHAR2 |
Code for the color of the berried ova. |
SPERM_PLATE_CODE
VARCHAR2 |
Code for the condition of the sperm plate. |
MISSING_LEFT_ANTENNA_CODE
VARCHAR2 |
Code for missing appendage left antenna. |
MISSING_LEFT_ANTENNULE_CODE
VARCHAR2 |
Code for missing appendage left antennule. |
MISSING_LEFT_LEG1_CODE
VARCHAR2 |
Code for missing appendage left leg 1. |
MISSING_LEFT_LEG2_CODE
VARCHAR2 |
Code for missing appendage left leg 2. |
MISSING_LEFT_LEG3_CODE
VARCHAR2 |
Code for missing appendage left leg 3. |
MISSING_LEFT_LEG4_CODE
VARCHAR2 |
Code for missing appendage left leg 4. |
MISSING_LEFT_LEG5_CODE
VARCHAR2 |
Code for missing appendage left leg 5. |
MISSING_RIGHT_ANTENNA_CODE
VARCHAR2 |
Code for missing appendage right antenna. |
MISSING_RIGHT_ANTENNULE_CODE
VARCHAR2 |
Code for missing appendage right antennule. |
MISSING_RIGHT_LEG1_CODE
VARCHAR2 |
Code for missing appendage right leg 1. |
MISSING_RIGHT_LEG2_CODE
VARCHAR2 |
Code for missing appendage right leg 2. |
MISSING_RIGHT_LEG3_CODE
VARCHAR2 |
Code for missing appendage right leg 3. |
MISSING_RIGHT_LEG4_CODE
VARCHAR2 |
Code for missing appendage right leg 4. |
MISSING_RIGHT_LEG5_CODE
VARCHAR2 |
Code for missing appendage right leg 5. |
JOB_NUMBER
VARCHAR2 |
A consecutive number assigned by the data entry staff to a block of data that is entered and verified. Format DYYNNN, where D is constant, YY is the last two digits of the year and NNN is the consecutive number that starts with 001 at the beginning of each calendar year, e.g., D85013. |
SEQUENCE_NUMBER
VARCHAR2 |
A consecutive number assigned to each record for a block of data. |
DATE_LOADED
DATE |
Date when the record was loaded into Oracle or updated. |
Child Items
No Child Items for this record.
Contact Information
No contact information is available for this record.
Please contact the owner organization (PIFSC) for inquiries on this record.
Item Identification
Title: | RI021AA1_V |
---|---|
Short Name: | RI021AA1_V |
Status: | Completed |
Abstract: |
Crustacean Tagging and Morphometry data collected on NOAA R/V Townsend Cromwell cruises. |
Entity Information
Entity Type: | Data Table |
---|---|
Active Version?: | Yes |
Description: |
Crustacean Tagging and Morphometry data collected on NOAA R/V Townsend Cromwell cruises. |
Data Attributes
Attribute Summary
![]() |
![]() |
Name | Type | Description |
---|---|---|---|---|
100
|
DATASET_CODE | VARCHAR2 | Source ID Code assigned by the data entry staff. | |
100
|
VERSION_CODE | VARCHAR2 | Code for the format version assigned by the data entry staff. | |
100
|
VESSEL_CODE | VARCHAR2 | Code for the vessel. | |
100
|
CRUISE_NUMBER | VARCHAR2 | Last two digits of the year of the cruise and two-digit incremental number of the cruise for the year. | |
100
|
YEAR | VARCHAR2 | Year of capture. | |
100
|
MONTH | VARCHAR2 | Month of capture. | |
100
|
DAY | VARCHAR2 | Day of capture. | |
100
|
CAPTURE_STATION_NUMBER | VARCHAR2 | Capture station number. | |
100
|
CAPTURE_LATITUDE_DEGREES | VARCHAR2 | Capture latitude degrees. Units for values are degrees. | |
100
|
CAPTURE_LATITUDE_MINUTES | VARCHAR2 | Capture latitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. | |
100
|
CAPTURE_LATITUDE_DIRECTION | VARCHAR2 | Capture latitude direction. | |
100
|
CAPTURE_LATITUDE_DD | NUMERIC | Computed capture latitude, in decimal degrees. Positive values are North latitudes; negative values are South latitudes. Units for values are degrees. Measures are reported with a precision of 40. | |
100
|
CAPTURE_LONGITUDE_DEGREES | VARCHAR2 | Capture longitude degrees. Units for values are degrees. | |
100
|
CAPTURE_LONGITUDE_MINUTES | VARCHAR2 | Capture longitude minutes, in tenths of a minute. During data entry the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. | |
100
|
CAPTURE_LONGITUDE_DIRECTION | VARCHAR2 | Capture longitude direction. | |
100
|
CAPTURE_LONGITUDE_DD | NUMERIC | Computed capture longitude, in decimal degrees. Positive values are East longitudes; negative values are West longitudes. Units for values are degrees. Measures are reported with a precision of 39. | |
100
|
RELEASE_STATION_NUMBER | VARCHAR2 | Release station number. | |
100
|
RELEASE_LATITUDE_DEGREES | VARCHAR2 | Release latitude degrees. Units for values are degrees. | |
100
|
RELEASE_LATITUDE_MINUTES | VARCHAR2 | Release latitude minutes, in tenths of a minute. During data entry the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. | |
100
|
RELEASE_LATITUDE_DIRECTION | VARCHAR2 | Release latitude direction. | |
100
|
RELEASE_LATITUDE_DD | VARCHAR2 | Computed release latitude, in decimal degrees. Positive values are North latitudes; negative values are South latitudes. Units for values are degrees. Measures are reported with a precision of 40. | |
100
|
RELEASE_LONGITUDE_DEGREES | VARCHAR2 | Release longitude degrees. Units for values are degrees. | |
100
|
RELEASE_LONGITUDE_MINUTES | VARCHAR2 | Release longitude minutes, in tenths of a minute. During data entry the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. | |
100
|
RELEASE_LONGITUDE_DIRECTION | VARCHAR2 | Release longitude direction. | |
100
|
RELEASE_LONGITUDE_DD | VARCHAR2 | Computed release longitude, in decimal degrees. Positive values are East longitudes; negative values are West longitudes. Units for values are degrees. Measures are reported with a precision of 39. | |
100
|
STRING_NUMBER | VARCHAR2 | The consecutive number of the string of traps. A string is an assembly of traps or pots attached to a mainline. If there is more than one string per station, each string should be numbered consecutively as they are retrieved. | |
100
|
TRAP_NUMBER | VARCHAR2 | The consecutive number assigned to gear (trap or pot) attached to a string. | |
100
|
GEAR_CODE | VARCHAR2 | Code for the type of gear used. | |
100
|
LINE_NUMBER | VARCHAR2 | A consecutive number for each entry on the collection form. | |
100
|
SPECIES_CODE | VARCHAR2 | Czm 10-digit species code. | |
100
|
TAG_NUMBER | VARCHAR2 | Tag number attached to the animal before release. | |
100
|
CARAPACE_LENGTH | VARCHAR2 | Carapace length, in hundredths of a millimeter. During data entry the decimal point was omitted; it has been inserted into the data. Units for values are millimeters. Measures are reported with a precision of 5. | |
100
|
CARAPACE_WIDTH | VARCHAR2 | Carapace width, in hundredths of a millimeter. During data entry the decimal point was omitted; it has been inserted into the data. Units for values are millimeters. Measures are reported with a precision of 5. | |
100
|
TAIL_LENGTH | VARCHAR2 | Tail length, in hundredths of a millimeter. During data entry the decimal point was omitted; it has been inserted into the data. Units for values are millimeters. Measures are reported with a precision of 5. | |
100
|
TAIL_WIDTH | VARCHAR2 | Tail width, in hundredths of a millimeter. During data entry the decimal point was omitted (00000 = 000.00). Units for values are millimeters. Measures are reported with a precision of 5. | |
100
|
TOTAL_LENGTH | VARCHAR2 | Total length, in hundredths of a millimeter. During data entry the decimal point was omitted; it has been inserted into the data. Units for values are millimeters. Measures are reported with a precision of 5. | |
100
|
WEIGHT | VARCHAR2 | Weight, in ten thousandths of a kilogram. During data entry the decimal point was omitted; it has been inserted into the data. Units for values are kilograms. Measures are reported with a precision of 6. | |
100
|
SEX_CODE | VARCHAR2 | Code for the sex of the species. | |
100
|
BERRIED_OVA_COLOR_CODE | VARCHAR2 | Code for the color of the berried ova. | |
100
|
SPERM_PLATE_CODE | VARCHAR2 | Code for the condition of the sperm plate. | |
100
|
MISSING_LEFT_ANTENNA_CODE | VARCHAR2 | Code for missing appendage left antenna. | |
100
|
MISSING_LEFT_ANTENNULE_CODE | VARCHAR2 | Code for missing appendage left antennule. | |
100
|
MISSING_LEFT_LEG1_CODE | VARCHAR2 | Code for missing appendage left leg 1. | |
100
|
MISSING_LEFT_LEG2_CODE | VARCHAR2 | Code for missing appendage left leg 2. | |
100
|
MISSING_LEFT_LEG3_CODE | VARCHAR2 | Code for missing appendage left leg 3. | |
100
|
MISSING_LEFT_LEG4_CODE | VARCHAR2 | Code for missing appendage left leg 4. | |
100
|
MISSING_LEFT_LEG5_CODE | VARCHAR2 | Code for missing appendage left leg 5. | |
100
|
MISSING_RIGHT_ANTENNA_CODE | VARCHAR2 | Code for missing appendage right antenna. | |
100
|
MISSING_RIGHT_ANTENNULE_CODE | VARCHAR2 | Code for missing appendage right antennule. | |
100
|
MISSING_RIGHT_LEG1_CODE | VARCHAR2 | Code for missing appendage right leg 1. | |
100
|
MISSING_RIGHT_LEG2_CODE | VARCHAR2 | Code for missing appendage right leg 2. | |
100
|
MISSING_RIGHT_LEG3_CODE | VARCHAR2 | Code for missing appendage right leg 3. | |
100
|
MISSING_RIGHT_LEG4_CODE | VARCHAR2 | Code for missing appendage right leg 4. | |
100
|
MISSING_RIGHT_LEG5_CODE | VARCHAR2 | Code for missing appendage right leg 5. | |
100
|
JOB_NUMBER | VARCHAR2 | A consecutive number assigned by the data entry staff to a block of data that is entered and verified. Format DYYNNN, where D is constant, YY is the last two digits of the year and NNN is the consecutive number that starts with 001 at the beginning of each calendar year, e.g., D85013. | |
100
|
SEQUENCE_NUMBER | VARCHAR2 | A consecutive number assigned to each record for a block of data. | |
100
|
DATE_LOADED | DATE | Date when the record was loaded into Oracle or updated. |
Attribute Details
DATASET_CODE
Seq. Order: | 1 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 5 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Source ID Code assigned by the data entry staff. |
General Data Type: | VARCHAR2 |
VERSION_CODE
Seq. Order: | 2 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for the format version assigned by the data entry staff. |
General Data Type: | VARCHAR2 |
VESSEL_CODE
Seq. Order: | 3 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for the vessel. |
General Data Type: | VARCHAR2 |
Allowed Values: | 001 = NOAA R/V TOWNSEND CROMWELL |
CRUISE_NUMBER
Seq. Order: | 4 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Last two digits of the year of the cruise and two-digit incremental number of the cruise for the year. |
General Data Type: | VARCHAR2 |
YEAR
Seq. Order: | 5 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Year of capture. |
General Data Type: | VARCHAR2 |
MONTH
Seq. Order: | 6 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Month of capture. |
General Data Type: | VARCHAR2 |
DAY
Seq. Order: | 7 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Day of capture. |
General Data Type: | VARCHAR2 |
CAPTURE_STATION_NUMBER
Seq. Order: | 8 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Capture station number. |
General Data Type: | VARCHAR2 |
CAPTURE_LATITUDE_DEGREES
Seq. Order: | 9 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Capture latitude degrees. Units for values are degrees. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees |
CAPTURE_LATITUDE_MINUTES
Seq. Order: | 10 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
Capture latitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
General Data Type: | VARCHAR2 |
Unit of Measure: | minutes |
CAPTURE_LATITUDE_DIRECTION
Seq. Order: | 11 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Capture latitude direction. |
General Data Type: | VARCHAR2 |
Allowed Values: | N = NORTH |
CAPTURE_LATITUDE_DD
Seq. Order: | 12 |
---|---|
Data Storage Type: | NUMERIC |
Max Length: | 41 |
Required: | No |
Primary Key: | No |
Scale: | 38 |
Status: | Active |
Description: |
Computed capture latitude, in decimal degrees. Positive values are North latitudes; negative values are South latitudes. Units for values are degrees. Measures are reported with a precision of 40. |
General Data Type: | NUMERIC |
Unit of Measure: | degrees |
CAPTURE_LONGITUDE_DEGREES
Seq. Order: | 13 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Capture longitude degrees. Units for values are degrees. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees |
CAPTURE_LONGITUDE_MINUTES
Seq. Order: | 14 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
Capture longitude minutes, in tenths of a minute. During data entry the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
General Data Type: | VARCHAR2 |
Unit of Measure: | minutes |
CAPTURE_LONGITUDE_DIRECTION
Seq. Order: | 15 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Capture longitude direction. |
General Data Type: | VARCHAR2 |
Allowed Values: | E = EAST; W = WEST |
CAPTURE_LONGITUDE_DD
Seq. Order: | 16 |
---|---|
Data Storage Type: | NUMERIC |
Max Length: | 41 |
Required: | No |
Primary Key: | No |
Scale: | 36 |
Status: | Active |
Description: |
Computed capture longitude, in decimal degrees. Positive values are East longitudes; negative values are West longitudes. Units for values are degrees. Measures are reported with a precision of 39. |
General Data Type: | NUMERIC |
Unit of Measure: | degrees |
RELEASE_STATION_NUMBER
Seq. Order: | 17 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Release station number. |
General Data Type: | VARCHAR2 |
RELEASE_LATITUDE_DEGREES
Seq. Order: | 18 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Release latitude degrees. Units for values are degrees. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees |
RELEASE_LATITUDE_MINUTES
Seq. Order: | 19 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
Release latitude minutes, in tenths of a minute. During data entry the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
General Data Type: | VARCHAR2 |
Unit of Measure: | minutes |
RELEASE_LATITUDE_DIRECTION
Seq. Order: | 20 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Release latitude direction. |
General Data Type: | VARCHAR2 |
Allowed Values: | N = NORTH |
RELEASE_LATITUDE_DD
Seq. Order: | 21 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 41 |
Required: | No |
Primary Key: | No |
Scale: | 38 |
Status: | Active |
Description: |
Computed release latitude, in decimal degrees. Positive values are North latitudes; negative values are South latitudes. Units for values are degrees. Measures are reported with a precision of 40. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees |
RELEASE_LONGITUDE_DEGREES
Seq. Order: | 22 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Release longitude degrees. Units for values are degrees. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees |
RELEASE_LONGITUDE_MINUTES
Seq. Order: | 23 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
Release longitude minutes, in tenths of a minute. During data entry the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
General Data Type: | VARCHAR2 |
Unit of Measure: | minutes |
RELEASE_LONGITUDE_DIRECTION
Seq. Order: | 24 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Release longitude direction. |
General Data Type: | VARCHAR2 |
Allowed Values: | E = EAST; W = WEST |
RELEASE_LONGITUDE_DD
Seq. Order: | 25 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 41 |
Required: | No |
Primary Key: | No |
Scale: | 36 |
Status: | Active |
Description: |
Computed release longitude, in decimal degrees. Positive values are East longitudes; negative values are West longitudes. Units for values are degrees. Measures are reported with a precision of 39. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees |
STRING_NUMBER
Seq. Order: | 26 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
The consecutive number of the string of traps. A string is an assembly of traps or pots attached to a mainline. If there is more than one string per station, each string should be numbered consecutively as they are retrieved. |
General Data Type: | VARCHAR2 |
TRAP_NUMBER
Seq. Order: | 27 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
The consecutive number assigned to gear (trap or pot) attached to a string. |
General Data Type: | VARCHAR2 |
GEAR_CODE
Seq. Order: | 28 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for the type of gear used. |
General Data Type: | VARCHAR2 |
Allowed Values: | 43 = "OCTOPUS POT - PLASTIC (PVC PIPE) TYPE, 5 IN DIAMETER PIPE, 3 IN MOUTH IN DIAMETER"; 45 = "PLASTIC LOBSTER POT, WITH 2 IN X 2 IN MESH (CONTROL)"; 46 = "PLASTIC LOBSTER POT (54 MM ESCAPE VENT) (BLACK)"; 47 = "PLASTIC LOBSTER POT (55 MM ESCAPE VENT) (RED)"; 48 = "PLASTIC LOBSTER POT (56 MM ESCAPE VENT) (BLUE)"; 61 = "VARIOUS CALIFORNIA LOBSTER POTS (GENERALLY 2 IN X 4 IN MESH) (FIRST USED ON TC 85-04, ALSO USED ON TC 86-05, PURCHASED FROM SPI)"; 64 = "2 CHAMBERED, 3 FUNNEL ENTRANCE WITH 4TH ENTRANCE TO INNER CHAMBER; 74 CM X 73 CM X 32 CM" |
LINE_NUMBER
Seq. Order: | 29 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
A consecutive number for each entry on the collection form. |
General Data Type: | VARCHAR2 |
SPECIES_CODE
Seq. Order: | 30 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 10 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Czm 10-digit species code. |
General Data Type: | VARCHAR2 |
Allowed Values: | 6483460302 = HETEROCARPUS LAEVIGATUS; 6486060101 = PANULIRUS JAPONICUS; 6486060101 = PANULIRUS MARGINATUS; 6486060102 = PANULIRUS PENICILLATUS; 6486070201 = SCYLLARIDES SQUAMMOSUS; 6486070202 = SCYLLARIDES HAANII; 6486070301 = PARRIBACUS ANTARCTICUS; 6487110401 = LITHODES NINTOKUAE; 6487110503 = PARALOMIS PACIFICA; 6488340301 = PROGERYON QUINOTAE; 6488340401 = NEOPILUMNOPLAX MAJOR |
TAG_NUMBER
Seq. Order: | 31 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 6 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Tag number attached to the animal before release. |
General Data Type: | VARCHAR2 |
CARAPACE_LENGTH
Seq. Order: | 32 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 6 |
Required: | No |
Primary Key: | No |
Scale: | 2 |
Status: | Active |
Description: |
Carapace length, in hundredths of a millimeter. During data entry the decimal point was omitted; it has been inserted into the data. Units for values are millimeters. Measures are reported with a precision of 5. |
General Data Type: | VARCHAR2 |
Unit of Measure: | millimeters |
CARAPACE_WIDTH
Seq. Order: | 33 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 6 |
Required: | No |
Primary Key: | No |
Scale: | 2 |
Status: | Active |
Description: |
Carapace width, in hundredths of a millimeter. During data entry the decimal point was omitted; it has been inserted into the data. Units for values are millimeters. Measures are reported with a precision of 5. |
General Data Type: | VARCHAR2 |
Unit of Measure: | millimeters |
TAIL_LENGTH
Seq. Order: | 34 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 6 |
Required: | No |
Primary Key: | No |
Scale: | 2 |
Status: | Active |
Description: |
Tail length, in hundredths of a millimeter. During data entry the decimal point was omitted; it has been inserted into the data. Units for values are millimeters. Measures are reported with a precision of 5. |
General Data Type: | VARCHAR2 |
Unit of Measure: | millimeters |
TAIL_WIDTH
Seq. Order: | 35 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 6 |
Required: | No |
Primary Key: | No |
Scale: | 2 |
Status: | Active |
Description: |
Tail width, in hundredths of a millimeter. During data entry the decimal point was omitted (00000 = 000.00). Units for values are millimeters. Measures are reported with a precision of 5. |
General Data Type: | VARCHAR2 |
Unit of Measure: | millimeters |
TOTAL_LENGTH
Seq. Order: | 36 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 6 |
Required: | No |
Primary Key: | No |
Scale: | 2 |
Status: | Active |
Description: |
Total length, in hundredths of a millimeter. During data entry the decimal point was omitted; it has been inserted into the data. Units for values are millimeters. Measures are reported with a precision of 5. |
General Data Type: | VARCHAR2 |
Unit of Measure: | millimeters |
WEIGHT
Seq. Order: | 37 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 7 |
Required: | No |
Primary Key: | No |
Scale: | 4 |
Status: | Active |
Description: |
Weight, in ten thousandths of a kilogram. During data entry the decimal point was omitted; it has been inserted into the data. Units for values are kilograms. Measures are reported with a precision of 6. |
General Data Type: | VARCHAR2 |
Unit of Measure: | kilograms |
SEX_CODE
Seq. Order: | 38 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for the sex of the species. |
General Data Type: | VARCHAR2 |
Allowed Values: | F = FEMALE; M = MALE |
BERRIED_OVA_COLOR_CODE
Seq. Order: | 39 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for the color of the berried ova. |
General Data Type: | VARCHAR2 |
Allowed Values: | 1 = ORANGE; 2 = BROWN; 3 = WHITE; 4 = BLUE (SHRIMP ONLY); 5 = BERRIED (COLOR NOT RECORDED) |
SPERM_PLATE_CODE
Seq. Order: | 40 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for the condition of the sperm plate. |
General Data Type: | VARCHAR2 |
Allowed Values: | 1 = WHITISH BROWN (GRAY); 2 = BROWN SMOOTH; 3 = BROWN ROUGH; 4 = BLACK; 5 = SPERM PLATE PRESENT (CHECK, YES) |
MISSING_LEFT_ANTENNA_CODE
Seq. Order: | 41 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for missing appendage left antenna. |
General Data Type: | VARCHAR2 |
Allowed Values: | 0 = NO MISSING APPENDAGE; 1 = MISSING APPENDAGE |
MISSING_LEFT_ANTENNULE_CODE
Seq. Order: | 42 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for missing appendage left antennule. |
General Data Type: | VARCHAR2 |
Allowed Values: | 0 = NO MISSING APPENDAGE; 1 = MISSING APPENDAGE |
MISSING_LEFT_LEG1_CODE
Seq. Order: | 43 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for missing appendage left leg 1. |
General Data Type: | VARCHAR2 |
Allowed Values: | 0 = NO MISSING APPENDAGE; 1 = MISSING APPENDAGE |
MISSING_LEFT_LEG2_CODE
Seq. Order: | 44 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for missing appendage left leg 2. |
General Data Type: | VARCHAR2 |
Allowed Values: | 0 = NO MISSING APPENDAGE; 1 = MISSING APPENDAGE |
MISSING_LEFT_LEG3_CODE
Seq. Order: | 45 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for missing appendage left leg 3. |
General Data Type: | VARCHAR2 |
Allowed Values: | 0 = NO MISSING APPENDAGE; 1 = MISSING APPENDAGE |
MISSING_LEFT_LEG4_CODE
Seq. Order: | 46 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for missing appendage left leg 4. |
General Data Type: | VARCHAR2 |
Allowed Values: | 0 = NO MISSING APPENDAGE; 1 = MISSING APPENDAGE |
MISSING_LEFT_LEG5_CODE
Seq. Order: | 47 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for missing appendage left leg 5. |
General Data Type: | VARCHAR2 |
Allowed Values: | 0 = NO MISSING APPENDAGE; 1 = MISSING APPENDAGE |
MISSING_RIGHT_ANTENNA_CODE
Seq. Order: | 48 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for missing appendage right antenna. |
General Data Type: | VARCHAR2 |
Allowed Values: | 0 = NO MISSING APPENDAGE; 1 = MISSING APPENDAGE |
MISSING_RIGHT_ANTENNULE_CODE
Seq. Order: | 49 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for missing appendage right antennule. |
General Data Type: | VARCHAR2 |
Allowed Values: | 0 = NO MISSING APPENDAGE; 1 = MISSING APPENDAGE |
MISSING_RIGHT_LEG1_CODE
Seq. Order: | 50 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for missing appendage right leg 1. |
General Data Type: | VARCHAR2 |
Allowed Values: | 0 = NO MISSING APPENDAGE; 1 = MISSING APPENDAGE |
MISSING_RIGHT_LEG2_CODE
Seq. Order: | 51 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for missing appendage right leg 2. |
General Data Type: | VARCHAR2 |
Allowed Values: | 0 = NO MISSING APPENDAGE; 1 = MISSING APPENDAGE |
MISSING_RIGHT_LEG3_CODE
Seq. Order: | 52 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for missing appendage right leg 3. |
General Data Type: | VARCHAR2 |
Allowed Values: | 0 = NO MISSING APPENDAGE; 1 = MISSING APPENDAGE |
MISSING_RIGHT_LEG4_CODE
Seq. Order: | 53 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for missing appendage right leg 4. |
General Data Type: | VARCHAR2 |
Allowed Values: | 0 = NO MISSING APPENDAGE; 1 = MISSING APPENDAGE |
MISSING_RIGHT_LEG5_CODE
Seq. Order: | 54 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for missing appendage right leg 5. |
General Data Type: | VARCHAR2 |
Allowed Values: | 0 = NO MISSING APPENDAGE; 1 = MISSING APPENDAGE |
JOB_NUMBER
Seq. Order: | 55 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 6 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
A consecutive number assigned by the data entry staff to a block of data that is entered and verified. Format DYYNNN, where D is constant, YY is the last two digits of the year and NNN is the consecutive number that starts with 001 at the beginning of each calendar year, e.g., D85013. |
General Data Type: | VARCHAR2 |
SEQUENCE_NUMBER
Seq. Order: | 56 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 8 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
A consecutive number assigned to each record for a block of data. |
General Data Type: | VARCHAR2 |
DATE_LOADED
Seq. Order: | 57 |
---|---|
Data Storage Type: | DATE |
Max Length: | 22 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Date when the record was loaded into Oracle or updated. |
General Data Type: | DATE |
Catalog Details
Catalog Item ID: | 63444 |
---|---|
GUID: | gov.noaa.nmfs.inport:63444 |
Metadata Record Created By: | Brent M Miyamoto |
Metadata Record Created: | 2021-01-15 23:58+0000 |
Metadata Record Last Modified By: | SysAdmin InPortAdmin |
Metadata Record Last Modified: | 2022-08-09 17:11+0000 |
Metadata Record Published: | 2021-01-22 |
Owner Org: | PIFSC |
Metadata Publication Status: | Published Externally |
Do Not Publish?: | N |
Metadata Last Review Date: | 2021-01-22 |
Metadata Review Frequency: | 1 Year |
Metadata Next Review Date: | 2022-01-22 |