RP050AA4_V
Entity (ENT) | Pacific Islands Fisheries Science Center (PIFSC)GUID: gov.noaa.nmfs.inport:65544 | Updated: August 9, 2022 | Published / External
-
View As
- Full List View
- Printable Form
- EXPORTS
- InPort XML
- View in Hierarchy
Summary
Experimental midwater horizontal longline and vertical longline data collected during a NOAA R/V Townsend Cromwell cruise in 1989 at the SE Hancock Seamount.
DescriptionExperimental midwater horizontal longline and vertical longline data collected during a NOAA R/V Townsend Cromwell cruise in 1989 at the SE Hancock Seamount.
Entity Information
Entity Type
Data Table
Data Attribute / Type | Description |
---|---|
DATASET_CODE
VARCHAR2 |
Source ID Code assigned by the data entry staff. |
VERSION_CODE
VARCHAR2 |
Code for the format version assigned by the data entry staff. |
VESSEL_CODE
VARCHAR2 |
Code for the vessel. |
CRUISE_NUMBER
VARCHAR2 |
Last two digits of the year of the cruise and two digits incremental number of the cruise for the year, e.g., 8906. |
DATA_TYPE_CODE
VARCHAR2 |
Code for the type of longline operation. |
STATION_NUMBER
VARCHAR2 |
Station number of the longline operataion. |
BANK_CODE
VARCHAR2 |
Seven digit bank code. |
SET_LATITUDE_DEGREES
VARCHAR2 |
Set latitude degrees. Units for values are degrees. |
SET_LATITUDE_MINUTES
VARCHAR2 |
Set latitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
SET_LATITUDE_DIRECTION
VARCHAR2 |
Set latitude direction. |
SET_LATITUDE_DD
NUMBER |
Computed set latitude, in decimal degrees. Postive values are North latitudes; negative values are South latitudes. Units for values are degrees. Measures are reported with a precision of 40. |
SET_LONGITUDE_DEGREES
VARCHAR2 |
Set longitude degrees. Units for values are degrees. |
SET_LONGITUDE_MINUTES
VARCHAR2 |
Set longitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
SET_LONGITUDE_DIRECTION
VARCHAR2 |
Set longitude direction. |
SET_LONGITUDE_DD
NUMBER |
Computed set longitude, in decimal degrees. Postive values are East longitudes; negative values are West longitudes. Units for values are degrees. Measures are reported with a precision of 39. |
HAUL_LATITUDE_DEGREES
VARCHAR2 |
Haul latitude degrees. Units for values are degrees. |
HAUL_LATITUDE_MINUTES
VARCHAR2 |
Haul latitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
HAUL_LATITUDE_DIRECTION
VARCHAR2 |
Haul latitude direction. |
HAUL_LATITUDE_DD
NUMBER |
Computed haul latitude, in decimal degrees. Postive values are North latitudes; negative values are South latitudes. Units for values are degrees. Measures are reported with a precision of 40. |
HAUL_LONGITUDE_DEGREES
VARCHAR2 |
Haul longitude degrees. Units for values are degrees. |
HAUL_LONGITUDE_MINUTES
VARCHAR2 |
Haul longitude minutes, in tenths of a minute. During data entry, the decimal was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
HAUL_LONGITUDE_DIRECTION
VARCHAR2 |
Haul longitude direction. |
HAUL_LONGITUDE_DD
NUMBER |
Computed haul longitude, in decimal degrees. Postive values are East longitudes; negative values are West longitudes. Units for values are degrees. Measures are reported with a precision of 39. |
SET_YEAR
VARCHAR2 |
Set year. |
SET_MONTH
VARCHAR2 |
Set month. |
SET_DAY
VARCHAR2 |
Set day. |
SET_TIME
VARCHAR2 |
Set time. |
SET_START_DEPTH
VARCHAR2 |
Set start depth, in fathoms. Units for values are fathoms. |
SET_END_DEPTH
VARCHAR2 |
Set end depth, in fathoms. Units for values are fathoms. |
HAUL_YEAR
VARCHAR2 |
Haul year. |
HAUL_MONTH
VARCHAR2 |
Haul month. |
HAUL_DAY
VARCHAR2 |
Haul day. |
HAUL_TIME
VARCHAR2 |
Haul time. |
HAUL_START_DEPTH
VARCHAR2 |
Haul start depth, in fathoms. Units for values are fathoms. |
HAUL_END_DEPTH
VARCHAR2 |
Haul end depth, in fathoms. Units for values are fathoms. |
FLOATLINE
VARCHAR2 |
Floatline, in fathoms. Units for values are fathoms. |
DROPPER_LENGTH
VARCHAR2 |
Dropper length, in tenths of a meter. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are meters. Measures are reported with a precision of 2. |
DROPPER_SPACING
VARCHAR2 |
Dropper spacing, in fathoms. Units for values are fathoms. |
TOTAL_HOOKS
VARCHAR2 |
Total number of hooks. |
HOOK_TYPE_1
VARCHAR2 |
Hook Type 1. |
HOOK_TYPE_2
VARCHAR2 |
Hook Type 2. |
HOOK_TYPE_3
VARCHAR2 |
Hook Type 3. |
HOOK_TYPE_4
VARCHAR2 |
Hook Type 4. |
BAIT_CODE
VARCHAR2 |
Code for the bait used. |
TEMPERATURE_SURFACE
VARCHAR2 |
Surface temperature, in tenths of a degree Centigrade. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are degrees Centigrade. Measures are reported with a precision of 3. |
TEMPERATURE_BOTTOM
VARCHAR2 |
Bottom temperature, in tenths of a degree Centigrade. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are degrees Centigrade. Measures are reported with a precision of 3. |
STRING_NUMBER
VARCHAR2 |
String number. |
HOOK_NUMBER
VARCHAR2 |
Hook number. |
HOOK_SIZE
VARCHAR2 |
Hook size. |
FISH_NUMBER
VARCHAR2 |
Fish number. |
SPECIES_CODE
VARCHAR2 |
Ten digit CZM species code. |
FORK_LENGTH
VARCHAR2 |
Fork length, tenths of a centimeter. During data entry, the decimal point was omitted; it has been inserted into the data. Measures are reported with a precision of 4. |
WEIGHT
VARCHAR2 |
Weight, in hundredths of a kilogram. During data entry, the decimal point was omitted; it has been inserted into the data. Measures are reported with a precision of 4. |
SHARK_EATEN
VARCHAR2 |
Shark eaten, null = blank, 1 = checked. |
HOOK_LOST
VARCHAR2 |
Hook lost, null = blank, 1 = checked. |
BAIT
VARCHAR2 |
Bait, null = blank, null = checked, 1 = 1. |
TANGLE
VARCHAR2 |
Tangle, null = blank, 1 = checked. |
JOB_NUMBER
VARCHAR2 |
A consecutive number assigned by the data entry staff to a block of data that is entered and verified. Format DYYNNN, where D is constant, YY is the last two digits of the year and NNN is the consecutive number that starts with 001 at the beginning of each calendar year, e.g., D89474. |
SEQUENCE_NUMBER
VARCHAR2 |
A consecutive number assigned to each record for a block of data. |
DATE_LOADED
DATE |
Date when the record was loaded into Oracle or updated. |
Child Items
No Child Items for this record.
Contact Information
No contact information is available for this record.
Please contact the owner organization (PIFSC) for inquiries on this record.
Item Identification
Title: | RP050AA4_V |
---|---|
Short Name: | RP050AA4_V |
Status: | Completed |
Abstract: |
Experimental midwater horizontal longline and vertical longline data collected during a NOAA R/V Townsend Cromwell cruise in 1989 at the SE Hancock Seamount. |
Entity Information
Entity Type: | Data Table |
---|---|
Active Version?: | Yes |
Description: |
Experimental midwater horizontal longline and vertical longline data collected during a NOAA R/V Townsend Cromwell cruise in 1989 at the SE Hancock Seamount. |
Data Attributes
Attribute Summary
Name | Type | Description | ||
---|---|---|---|---|
100
|
DATASET_CODE | VARCHAR2 | Source ID Code assigned by the data entry staff. | |
100
|
VERSION_CODE | VARCHAR2 | Code for the format version assigned by the data entry staff. | |
100
|
VESSEL_CODE | VARCHAR2 | Code for the vessel. | |
100
|
CRUISE_NUMBER | VARCHAR2 | Last two digits of the year of the cruise and two digits incremental number of the cruise for the year, e.g., 8906. | |
100
|
DATA_TYPE_CODE | VARCHAR2 | Code for the type of longline operation. | |
100
|
STATION_NUMBER | VARCHAR2 | Station number of the longline operataion. | |
100
|
BANK_CODE | VARCHAR2 | Seven digit bank code. | |
100
|
SET_LATITUDE_DEGREES | VARCHAR2 | Set latitude degrees. Units for values are degrees. | |
100
|
SET_LATITUDE_MINUTES | VARCHAR2 | Set latitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. | |
100
|
SET_LATITUDE_DIRECTION | VARCHAR2 | Set latitude direction. | |
100
|
SET_LATITUDE_DD | NUMBER | Computed set latitude, in decimal degrees. Postive values are North latitudes; negative values are South latitudes. Units for values are degrees. Measures are reported with a precision of 40. | |
100
|
SET_LONGITUDE_DEGREES | VARCHAR2 | Set longitude degrees. Units for values are degrees. | |
100
|
SET_LONGITUDE_MINUTES | VARCHAR2 | Set longitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. | |
100
|
SET_LONGITUDE_DIRECTION | VARCHAR2 | Set longitude direction. | |
100
|
SET_LONGITUDE_DD | NUMBER | Computed set longitude, in decimal degrees. Postive values are East longitudes; negative values are West longitudes. Units for values are degrees. Measures are reported with a precision of 39. | |
100
|
HAUL_LATITUDE_DEGREES | VARCHAR2 | Haul latitude degrees. Units for values are degrees. | |
100
|
HAUL_LATITUDE_MINUTES | VARCHAR2 | Haul latitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. | |
100
|
HAUL_LATITUDE_DIRECTION | VARCHAR2 | Haul latitude direction. | |
100
|
HAUL_LATITUDE_DD | NUMBER | Computed haul latitude, in decimal degrees. Postive values are North latitudes; negative values are South latitudes. Units for values are degrees. Measures are reported with a precision of 40. | |
100
|
HAUL_LONGITUDE_DEGREES | VARCHAR2 | Haul longitude degrees. Units for values are degrees. | |
100
|
HAUL_LONGITUDE_MINUTES | VARCHAR2 | Haul longitude minutes, in tenths of a minute. During data entry, the decimal was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. | |
100
|
HAUL_LONGITUDE_DIRECTION | VARCHAR2 | Haul longitude direction. | |
100
|
HAUL_LONGITUDE_DD | NUMBER | Computed haul longitude, in decimal degrees. Postive values are East longitudes; negative values are West longitudes. Units for values are degrees. Measures are reported with a precision of 39. | |
100
|
SET_YEAR | VARCHAR2 | Set year. | |
100
|
SET_MONTH | VARCHAR2 | Set month. | |
100
|
SET_DAY | VARCHAR2 | Set day. | |
100
|
SET_TIME | VARCHAR2 | Set time. | |
100
|
SET_START_DEPTH | VARCHAR2 | Set start depth, in fathoms. Units for values are fathoms. | |
100
|
SET_END_DEPTH | VARCHAR2 | Set end depth, in fathoms. Units for values are fathoms. | |
100
|
HAUL_YEAR | VARCHAR2 | Haul year. | |
100
|
HAUL_MONTH | VARCHAR2 | Haul month. | |
100
|
HAUL_DAY | VARCHAR2 | Haul day. | |
100
|
HAUL_TIME | VARCHAR2 | Haul time. | |
100
|
HAUL_START_DEPTH | VARCHAR2 | Haul start depth, in fathoms. Units for values are fathoms. | |
100
|
HAUL_END_DEPTH | VARCHAR2 | Haul end depth, in fathoms. Units for values are fathoms. | |
100
|
FLOATLINE | VARCHAR2 | Floatline, in fathoms. Units for values are fathoms. | |
100
|
DROPPER_LENGTH | VARCHAR2 | Dropper length, in tenths of a meter. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are meters. Measures are reported with a precision of 2. | |
100
|
DROPPER_SPACING | VARCHAR2 | Dropper spacing, in fathoms. Units for values are fathoms. | |
100
|
TOTAL_HOOKS | VARCHAR2 | Total number of hooks. | |
100
|
HOOK_TYPE_1 | VARCHAR2 | Hook Type 1. | |
100
|
HOOK_TYPE_2 | VARCHAR2 | Hook Type 2. | |
100
|
HOOK_TYPE_3 | VARCHAR2 | Hook Type 3. | |
100
|
HOOK_TYPE_4 | VARCHAR2 | Hook Type 4. | |
100
|
BAIT_CODE | VARCHAR2 | Code for the bait used. | |
100
|
TEMPERATURE_SURFACE | VARCHAR2 | Surface temperature, in tenths of a degree Centigrade. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are degrees Centigrade. Measures are reported with a precision of 3. | |
100
|
TEMPERATURE_BOTTOM | VARCHAR2 | Bottom temperature, in tenths of a degree Centigrade. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are degrees Centigrade. Measures are reported with a precision of 3. | |
100
|
STRING_NUMBER | VARCHAR2 | String number. | |
100
|
HOOK_NUMBER | VARCHAR2 | Hook number. | |
100
|
HOOK_SIZE | VARCHAR2 | Hook size. | |
100
|
FISH_NUMBER | VARCHAR2 | Fish number. | |
100
|
SPECIES_CODE | VARCHAR2 | Ten digit CZM species code. | |
100
|
FORK_LENGTH | VARCHAR2 | Fork length, tenths of a centimeter. During data entry, the decimal point was omitted; it has been inserted into the data. Measures are reported with a precision of 4. | |
100
|
WEIGHT | VARCHAR2 | Weight, in hundredths of a kilogram. During data entry, the decimal point was omitted; it has been inserted into the data. Measures are reported with a precision of 4. | |
100
|
SHARK_EATEN | VARCHAR2 | Shark eaten, null = blank, 1 = checked. | |
100
|
HOOK_LOST | VARCHAR2 | Hook lost, null = blank, 1 = checked. | |
100
|
BAIT | VARCHAR2 | Bait, null = blank, null = checked, 1 = 1. | |
100
|
TANGLE | VARCHAR2 | Tangle, null = blank, 1 = checked. | |
100
|
JOB_NUMBER | VARCHAR2 | A consecutive number assigned by the data entry staff to a block of data that is entered and verified. Format DYYNNN, where D is constant, YY is the last two digits of the year and NNN is the consecutive number that starts with 001 at the beginning of each calendar year, e.g., D89474. | |
100
|
SEQUENCE_NUMBER | VARCHAR2 | A consecutive number assigned to each record for a block of data. | |
100
|
DATE_LOADED | DATE | Date when the record was loaded into Oracle or updated. |
Attribute Details
DATASET_CODE
Seq. Order: | 1 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 5 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Source ID Code assigned by the data entry staff. |
General Data Type: | VARCHAR2 |
VERSION_CODE
Seq. Order: | 2 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for the format version assigned by the data entry staff. |
General Data Type: | VARCHAR2 |
VESSEL_CODE
Seq. Order: | 3 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for the vessel. |
General Data Type: | VARCHAR2 |
Allowed Values: | 001 = NOAA R/V TOWNSEND CROMWELL |
CRUISE_NUMBER
Seq. Order: | 4 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Last two digits of the year of the cruise and two digits incremental number of the cruise for the year, e.g., 8906. |
General Data Type: | VARCHAR2 |
DATA_TYPE_CODE
Seq. Order: | 5 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for the type of longline operation. |
General Data Type: | VARCHAR2 |
Allowed Values: | 1 = MIDWATER HORIZONTAL LONGLINE; 2 - VERTICAL LONGLINE |
STATION_NUMBER
Seq. Order: | 6 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Station number of the longline operataion. |
General Data Type: | VARCHAR2 |
BANK_CODE
Seq. Order: | 7 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 7 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Seven digit bank code. |
General Data Type: | VARCHAR2 |
Allowed Values: | 1270100 = SE HANCOCK SEAMOUNT |
SET_LATITUDE_DEGREES
Seq. Order: | 8 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Set latitude degrees. Units for values are degrees. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees |
SET_LATITUDE_MINUTES
Seq. Order: | 9 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
Set latitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
General Data Type: | VARCHAR2 |
Unit of Measure: | minutes |
SET_LATITUDE_DIRECTION
Seq. Order: | 10 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Set latitude direction. |
General Data Type: | VARCHAR2 |
Allowed Values: | N = NORTH; S = SOUTH |
SET_LATITUDE_DD
Seq. Order: | 11 |
---|---|
Data Storage Type: | NUMBER |
Max Length: | 41 |
Required: | No |
Primary Key: | No |
Scale: | 38 |
Status: | Active |
Description: |
Computed set latitude, in decimal degrees. Postive values are North latitudes; negative values are South latitudes. Units for values are degrees. Measures are reported with a precision of 40. |
General Data Type: | NUMBER |
Unit of Measure: | degrees |
SET_LONGITUDE_DEGREES
Seq. Order: | 12 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Set longitude degrees. Units for values are degrees. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees |
SET_LONGITUDE_MINUTES
Seq. Order: | 13 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
Set longitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
General Data Type: | VARCHAR2 |
Unit of Measure: | minutes |
SET_LONGITUDE_DIRECTION
Seq. Order: | 14 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Set longitude direction. |
General Data Type: | VARCHAR2 |
Allowed Values: | E = EAST; W = WEST |
SET_LONGITUDE_DD
Seq. Order: | 15 |
---|---|
Data Storage Type: | NUMBER |
Max Length: | 40 |
Required: | No |
Primary Key: | No |
Scale: | 36 |
Status: | Active |
Description: |
Computed set longitude, in decimal degrees. Postive values are East longitudes; negative values are West longitudes. Units for values are degrees. Measures are reported with a precision of 39. |
General Data Type: | NUMBER |
Unit of Measure: | degrees |
HAUL_LATITUDE_DEGREES
Seq. Order: | 16 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Haul latitude degrees. Units for values are degrees. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees |
HAUL_LATITUDE_MINUTES
Seq. Order: | 17 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
Haul latitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
General Data Type: | VARCHAR2 |
Unit of Measure: | minutes |
HAUL_LATITUDE_DIRECTION
Seq. Order: | 18 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Haul latitude direction. |
General Data Type: | VARCHAR2 |
Allowed Values: | N = NORTH; S = SOUTH |
HAUL_LATITUDE_DD
Seq. Order: | 19 |
---|---|
Data Storage Type: | NUMBER |
Max Length: | 41 |
Required: | No |
Primary Key: | No |
Scale: | 38 |
Status: | Active |
Description: |
Computed haul latitude, in decimal degrees. Postive values are North latitudes; negative values are South latitudes. Units for values are degrees. Measures are reported with a precision of 40. |
General Data Type: | NUMBER |
Unit of Measure: | degrees |
HAUL_LONGITUDE_DEGREES
Seq. Order: | 20 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Haul longitude degrees. Units for values are degrees. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees |
HAUL_LONGITUDE_MINUTES
Seq. Order: | 21 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
Haul longitude minutes, in tenths of a minute. During data entry, the decimal was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
General Data Type: | VARCHAR2 |
Unit of Measure: | minutes |
HAUL_LONGITUDE_DIRECTION
Seq. Order: | 22 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Haul longitude direction. |
General Data Type: | VARCHAR2 |
Allowed Values: | E = EAST; W = WEST |
HAUL_LONGITUDE_DD
Seq. Order: | 23 |
---|---|
Data Storage Type: | NUMBER |
Max Length: | 40 |
Required: | No |
Primary Key: | No |
Scale: | 36 |
Status: | Active |
Description: |
Computed haul longitude, in decimal degrees. Postive values are East longitudes; negative values are West longitudes. Units for values are degrees. Measures are reported with a precision of 39. |
General Data Type: | NUMBER |
Unit of Measure: | degrees |
SET_YEAR
Seq. Order: | 24 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Set year. |
General Data Type: | VARCHAR2 |
SET_MONTH
Seq. Order: | 25 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Set month. |
General Data Type: | VARCHAR2 |
SET_DAY
Seq. Order: | 26 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Set day. |
General Data Type: | VARCHAR2 |
SET_TIME
Seq. Order: | 27 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Set time. |
General Data Type: | VARCHAR2 |
SET_START_DEPTH
Seq. Order: | 28 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Set start depth, in fathoms. Units for values are fathoms. |
General Data Type: | VARCHAR2 |
Unit of Measure: | fathoms |
SET_END_DEPTH
Seq. Order: | 29 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Set end depth, in fathoms. Units for values are fathoms. |
General Data Type: | VARCHAR2 |
Unit of Measure: | fathoms |
HAUL_YEAR
Seq. Order: | 30 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Haul year. |
General Data Type: | VARCHAR2 |
HAUL_MONTH
Seq. Order: | 31 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Haul month. |
General Data Type: | VARCHAR2 |
HAUL_DAY
Seq. Order: | 32 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Haul day. |
General Data Type: | VARCHAR2 |
HAUL_TIME
Seq. Order: | 33 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Haul time. |
General Data Type: | VARCHAR2 |
HAUL_START_DEPTH
Seq. Order: | 34 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Haul start depth, in fathoms. Units for values are fathoms. |
General Data Type: | VARCHAR2 |
Unit of Measure: | fathoms |
HAUL_END_DEPTH
Seq. Order: | 35 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Haul end depth, in fathoms. Units for values are fathoms. |
General Data Type: | VARCHAR2 |
Unit of Measure: | fathoms |
FLOATLINE
Seq. Order: | 36 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Floatline, in fathoms. Units for values are fathoms. |
General Data Type: | VARCHAR2 |
Unit of Measure: | fathoms |
DROPPER_LENGTH
Seq. Order: | 37 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
Dropper length, in tenths of a meter. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are meters. Measures are reported with a precision of 2. |
General Data Type: | VARCHAR2 |
Unit of Measure: | meters |
DROPPER_SPACING
Seq. Order: | 38 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Dropper spacing, in fathoms. Units for values are fathoms. |
General Data Type: | VARCHAR2 |
Unit of Measure: | fathoms |
TOTAL_HOOKS
Seq. Order: | 39 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Total number of hooks. |
General Data Type: | VARCHAR2 |
HOOK_TYPE_1
Seq. Order: | 40 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Hook Type 1. |
General Data Type: | VARCHAR2 |
HOOK_TYPE_2
Seq. Order: | 41 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Hook Type 2. |
General Data Type: | VARCHAR2 |
HOOK_TYPE_3
Seq. Order: | 42 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Hook Type 3. |
General Data Type: | VARCHAR2 |
HOOK_TYPE_4
Seq. Order: | 43 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Hook Type 4. |
General Data Type: | VARCHAR2 |
BAIT_CODE
Seq. Order: | 44 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for the bait used. |
General Data Type: | VARCHAR2 |
Allowed Values: | 01 = MIXED (CUT SEAMOUNT FISH); 04 = SQUID |
TEMPERATURE_SURFACE
Seq. Order: | 45 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 5 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
Surface temperature, in tenths of a degree Centigrade. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are degrees Centigrade. Measures are reported with a precision of 3. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees Centigrade |
TEMPERATURE_BOTTOM
Seq. Order: | 46 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 5 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
Bottom temperature, in tenths of a degree Centigrade. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are degrees Centigrade. Measures are reported with a precision of 3. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees Centigrade |
STRING_NUMBER
Seq. Order: | 47 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
String number. |
General Data Type: | VARCHAR2 |
HOOK_NUMBER
Seq. Order: | 48 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Hook number. |
General Data Type: | VARCHAR2 |
HOOK_SIZE
Seq. Order: | 49 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Hook size. |
General Data Type: | VARCHAR2 |
FISH_NUMBER
Seq. Order: | 50 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Fish number. |
General Data Type: | VARCHAR2 |
SPECIES_CODE
Seq. Order: | 51 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 10 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Ten digit CZM species code. |
General Data Type: | VARCHAR2 |
Allowed Values: | 0000000000 = NO CATCH; 8516160403 = SQUALUS MITSUKURII (CHEN, ET. AL. 1979)(SQUALUS BLAINVILLEI, S. FERNANDINUS); 8516160603 = ETMOPTERUS PUSILLUS; 8546150102 = BERYX SPLENDENS; 8554590201 = PENTACEROS RICHARDSONI; NULL = LOST GEAR |
FORK_LENGTH
Seq. Order: | 52 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 5 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
Fork length, tenths of a centimeter. During data entry, the decimal point was omitted; it has been inserted into the data. Measures are reported with a precision of 4. |
General Data Type: | VARCHAR2 |
WEIGHT
Seq. Order: | 53 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 5 |
Required: | No |
Primary Key: | No |
Scale: | 2 |
Status: | Active |
Description: |
Weight, in hundredths of a kilogram. During data entry, the decimal point was omitted; it has been inserted into the data. Measures are reported with a precision of 4. |
General Data Type: | VARCHAR2 |
SHARK_EATEN
Seq. Order: | 54 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Shark eaten, null = blank, 1 = checked. |
General Data Type: | VARCHAR2 |
Allowed Values: | NULL = SHARK EATEN CELL BLANK; 1 = SHARK EATEN CELL CHECKED ON DATA COLLECTION FORM |
HOOK_LOST
Seq. Order: | 55 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Hook lost, null = blank, 1 = checked. |
General Data Type: | VARCHAR2 |
Allowed Values: | NULL = HOOK LOST CELL BLANK; 1 = HOOK LOST CELL CHECKED ON DATA COLLECTION FORM |
BAIT
Seq. Order: | 56 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Bait, null = blank, null = checked, 1 = 1. |
General Data Type: | VARCHAR2 |
Allowed Values: | NULL = BAIT CELL BLANK OR CHECKED; 1 = 1 IN BAIT CELL ON DATA COLLECTION FORM |
TANGLE
Seq. Order: | 57 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Tangle, null = blank, 1 = checked. |
General Data Type: | VARCHAR2 |
Allowed Values: | NULL = TANGLE CELL BLANK; 1 = TANGLE CELL CHECKED ON DATA COLLECTION FORM |
JOB_NUMBER
Seq. Order: | 58 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 6 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
A consecutive number assigned by the data entry staff to a block of data that is entered and verified. Format DYYNNN, where D is constant, YY is the last two digits of the year and NNN is the consecutive number that starts with 001 at the beginning of each calendar year, e.g., D89474. |
General Data Type: | VARCHAR2 |
SEQUENCE_NUMBER
Seq. Order: | 59 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 8 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
A consecutive number assigned to each record for a block of data. |
General Data Type: | VARCHAR2 |
DATE_LOADED
Seq. Order: | 60 |
---|---|
Data Storage Type: | DATE |
Max Length: | 22 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Date when the record was loaded into Oracle or updated. |
General Data Type: | DATE |
Catalog Details
Catalog Item ID: | 65544 |
---|---|
GUID: | gov.noaa.nmfs.inport:65544 |
Metadata Record Created By: | Brent M Miyamoto |
Metadata Record Created: | 2021-09-29 01:32+0000 |
Metadata Record Last Modified By: | SysAdmin InPortAdmin |
Metadata Record Last Modified: | 2022-08-09 17:11+0000 |
Metadata Record Published: | 2021-09-29 |
Owner Org: | PIFSC |
Metadata Publication Status: | Published Externally |
Do Not Publish?: | N |
Metadata Last Review Date: | 2021-09-29 |
Metadata Review Frequency: | 1 Year |
Metadata Next Review Date: | 2022-09-29 |