Search Help Show/Hide Menu
Summary
Item Identification
Keywords
Physical Location
Data Set Info
Support Roles
Extents
Access Info
Distribution Info
Tech Environment
Data Quality
Data Management
Lineage
Catalog Details

Summary

Short Citation
Alaska Fisheries Science Center, 2024: AFSC/RACE/GAP/McConnaughey: Pribilof Hydro-2009-GIS, https://www.fisheries.noaa.gov/inport/item/32500.
Full Citation Examples

Abstract

The "add on" project area surveyed depths between the 27 and 175 meter depths around St. George Island and St Paul Island in the Central Bering Sea. Full bottom coverage, consisting of 100% multibeam data was achieved within the limits of hydrography for this survey. One hundred percent backscatter data was acquired and stored by TerraSond, Ltd to be processed by the client. The data were collected from the R/V Mount Mitchell by Terrasond, Inc using a Simrad EM710 multibeam echosounder.

Distribution Information

Access Constraints:

None

Use Constraints:

None

Controlled Theme Keywords

geoscientificInformation, oceans

Child Items

No Child Items for this record.

Contact Information

Point of Contact
Bob McConnaughey
bob.mcconnaughey@noaa.gov

Metadata Contact
Steve Intelmann
steve.intelmann@noaa.gov
(206) 526-4157

Extents

Geographic Area 1

-170.090307° W, -168.9595° E, 57.302917° N, 56.305312° S

Time Frame 1
2009-06-03 - 2009-06-21

Item Identification

Title: AFSC/RACE/GAP/McConnaughey: Pribilof Hydro-2009-GIS
Status: Completed
Publication Date: 2008-12-30
Abstract:

The "add on" project area surveyed depths between the 27 and 175 meter depths around St. George Island and St Paul Island in the Central Bering Sea. Full bottom coverage, consisting of 100% multibeam data was achieved within the limits of hydrography for this survey. One hundred percent backscatter data was acquired and stored by TerraSond, Ltd to be processed by the client. The data were collected from the R/V Mount Mitchell by Terrasond, Inc using a Simrad EM710 multibeam echosounder.

Purpose:

A navigable area survey was conducted in Pribilof Canyon, Alaska in accordance with the NOAA, National Ocean Service, Statement of Work, Pribilof Canyon Mapping, OPR- R144-KR-09, dated April 16, 2009. At the end of this main project, a "short add on" survey was conducted in two areas near St. George Island and St. Paul Island in an effort to delineate areas of shell hash around the two islands. The purpose of the main project was to provide NOAA with modern, accurate hydrographic survey data with which to update the nautical charts of the assigned area. The project was chartered in cooperation with the Marine Conservation Alliance and the Alaska Fisheries Science Center?s Resource Assessment and Conservation Engineering Division to provide bathymetry for, ?both habitat and charting purposes.? The project area is known for its incredible ecological productivity. It plays a role as permanent and temporary home to a wealth of biota which range in size from microscopic to some of the largest macroscopic organisms in the world. With such an abundance of marine life, it supports one of the world?s largest fishing fleets, whose catch ranges from cod to king crab.

Notes:

Loaded by FGDC Metadata Uploader, batch 7384, 10-19-2015 16:53

The following FGDC sections are not currently supported in InPort, but were preserved and will be included in the FGDC export:

- Spatial Reference Information (FGDC:spref),

- Spatial Data Organization Information (FGDC:spdoinfo)

Keywords

Theme Keywords

Thesaurus Keyword
ISO 19115 Topic Category
geoscientificInformation
ISO 19115 Topic Category
oceans
UNCONTROLLED
None Multibeam Backscatter
None Seafloor Habitat

Spatial Keywords

Thesaurus Keyword
UNCONTROLLED
None Alaska
None Bering Sea
None Pribilof Islands

Physical Location

Organization: Alaska Fisheries Science Center
City: Seattle
State/Province: WA
Country: USA

Data Set Information

Data Set Scope Code: Data Set
Maintenance Frequency: None Planned
Data Presentation Form: Map (digital)
Data Set Credit: Terrasond

Support Roles

Data Steward

CC ID: 321116
Date Effective From: 2015
Date Effective To:
Contact (Person): McConnaughey, Bob
Email Address: bob.mcconnaughey@noaa.gov

Distributor

CC ID: 321117
Date Effective From: 2015
Date Effective To:
Contact (Organization): Alaska Fisheries Science Center (AFSC)
Address: 7600 Sand Point Way N.E., Building 4
Seattle, WA 98115
USA
Email Address: afsc.webmaster@noaa.gov
Phone: (206) 526-4000
Fax: (206) 526-4004
URL: https://www.fisheries.noaa.gov/about/alaska-fisheries-science-center
Business Hours: 0700-1700 Pacific Time

Metadata Contact

CC ID: 321119
Date Effective From: 2015-10-19
Date Effective To:
Contact (Person): Intelmann, Steve
Address: 7600 Sand Point Way N.E., Building 4
Seattle, WA 98115
USA
Email Address: steve.intelmann@noaa.gov
Phone: (206) 526-4157
Fax: (206) 526-6723

Originator

CC ID: 321121
Date Effective From: 2015-10-19
Date Effective To:
Contact (Person): McConnaughey, Bob
Email Address: bob.mcconnaughey@noaa.gov

Point of Contact

CC ID: 321120
Date Effective From: 2015-10-19
Date Effective To:
Contact (Person): McConnaughey, Bob
Email Address: bob.mcconnaughey@noaa.gov

Extents

Currentness Reference: Hydrographic Survey was conducted in June 2009

Extent Group 1

Extent Group 1 / Geographic Area 1

CC ID: 321124
W° Bound: -170.090307
E° Bound: -168.9595
N° Bound: 57.302917
S° Bound: 56.305312

Extent Group 1 / Time Frame 1

CC ID: 321123
Time Frame Type: Range
Start: 2009-06-03
End: 2009-06-21

Access Information

Security Class: Unclassified
Data Access Procedure:

unknown

Data Access Constraints:

None

Data Use Constraints:

None

Distribution Information

Distribution 1

CC ID: 321137
Download URL: https://www.ncei.noaa.gov
Distributor:

Technical Environment

Description:

Microsoft Windows 7 Version 6.1 (Build 7601) Service Pack 1; Esri ArcGIS 10.3.0.4322

Data Quality

Accuracy:

See evaluation method.

Completeness Report:

no report

Conceptual Consistency:

no report

Quality Control Procedures Employed:

see Process steps

Data Management

Have Resources for Management of these Data Been Identified?: No
Approximate Percentage of Budget for these Data Devoted to Data Management: Unknown
Do these Data Comply with the Data Access Directive?: No
Is Access to the Data Limited Based on an Approved Waiver?: Yes
If Distributor (Data Hosting Service) is Needed, Please Indicate: Yes
Approximate Delay Between Data Collection and Dissemination: Unknown
If Delay is Longer than Latency of Automated Processing, Indicate Under What Authority Data Access is Delayed:

No delay

Actual or Planned Long-Term Data Archive Location: NCEI-MD
Approximate Delay Between Data Collection and Archiving: unknown
How Will the Data Be Protected from Accidental or Malicious Modification or Deletion Prior to Receipt by the Archive?:

IT Security and Contingency Plan for the system establishes procedures and applies to the functions, operations, and resources necessary to recover and restore data as hosted in the Western Regional Support Center in Seattle, Washington, following a disruption.

Lineage

Process Steps

Process Step 1

CC ID: 321129
Description:

Multibeam bathymetry and backscatter data collection was performed using Kongsberg SIS data acquisition software. The file naming convention was inherent to SIS and ensured that individual survey lines had unique names based on time of collection. SIS software generated ?.all? files which in addition to bathymetry and backscatter, contained positional and attitude information, both surface and full profile sound velocity, and vessel offset and alignment calibration values. All raw data files were stored on the acquisition computer?s hard drive for the duration of the survey. Multibeam bathymetry data were also logged by QPS QINSy acquisition software for the EM 710. These files included navigation, attitude, and heading data from the Pos MV as well as the secondary positioning data from the CNAV The POS M/V was set up to log Pos Pac data for both PPK and true heave to use in post processing if deemed necessary. SVP data were acquired with Sippican WinMark 21Sound velocity profiler software as binary .rdf files and exported in ascii .edf file format. The raw files from XCTD probes were further edited into a format compatible with TerraSond Ltd. Simple SVP conversion software. Sound velocity files were then converted to CARIS format with Simple SVP formatting software. CARIS .svp files were stored in the SVP folder in the CARIS folder structure. Sound velocity profiles were further converted into .asvp format for real-time use in Kongsberg SIS acquisition software. Chronological logs containing information specific to each line were maintained as an independent reference to aid in data integration and error tracking. Acquisition logs included the line name, start and end times, ping rate, range and power settings for each sonar, in each acquisition software. Acquisition logs included any additional comments deemed significant by the operator.

Process Date/Time: 2009-06-03 00:00:00

Process Step 2

CC ID: 321130
Description:

Preliminary multibeam data processing was completed aboard the survey vessel. Following the initial file conversion and backup, predicted tide data were loaded and each line was merged with the sounding data in CARIS HIPS. Navigation, Heave, Pitch, and Roll were already applied and accounted for by the Simrad beam steering algorithms, but were examined for errors in CARIS HIPS. The data were then cleaned using CARIS HIPS and SIPS subset editor and a multi-resolution BASE Surface was created to verify coverage and provide quality control feedback to the survey crew.

Process Date/Time: 2009-06-03 00:00:00

Process Step 3

CC ID: 321131
Description:

Shipboard data handling proceeded as follows: As multibeam data collection was conducted, Kongsberg SIS Acquisition software split the raw .all files into thirty minute (30 min) segments. Each segment was then organized by Julian day, and placed onto the network data storage device. The .all files are then converted into CARIS HIPS multibeam data processing format and then saved into the CARIS directory. Ultimately the project data reside on a networked attached storage (NAS) device in a directory identifying the project name, vessel name, and Julian date. All acquisition data (both raw and processed) resided on a NAS unit with a redundancy level of RAID 5. The NAS unit itself was independently backed-up twice daily onto an independent mirrored storage device. The 2 tiered levels of back-ups insured data security and the ability of the system to resist catastrophic equipment failure.

Process Date/Time: 2009-06-03 00:00:00

Process Step 4

CC ID: 321132
Description:

After inspecting the navigation and attitude data, the tide corrected data were merged with the navigation and attitude data. This initial merging step was conducted with an incomplete vessel configuration file featuring preliminary patch calibration, and sensor offset values. The merging process converted time-domain data into spatial-domain, geographically referenced soundings, and enabled the area based data editing process.

Process Date/Time: 2009-06-20 00:00:00

Process Step 5

CC ID: 321133
Description:

Following the merging process, area-based editing processes in CARIS HIPS Subset Editor was performed during the office review of survey soundings. During subset editing, the operator was presented with two and three-dimensional views of the soundings and a moveable bounding box to restrict the number of soundings being reviewed. Soundings were viewed from the south (looking north), from the west (looking east) and in plan view (looking down). These perspectives, as well as controlling the size and position of the bounding box, allowed the operator to compare lines, view features from different angles, measure features, query soundings and change sounding status flags. Soundings were also examined in the three-dimensional window as points, wire frame or a surface which could be rotated on any plane. Vertical exaggeration was increased as required to amplify trends or features. Soundings were flagged as accepted, rejected, designated, outstanding or examined. In the first phase of area editing, processors examined the entire survey area in CARIS HIPS Subset Editor and rejected outlying soundings unsupported by data from adjacent survey lines. Simultaneously, the data were scrutinized for any potential tide and sound velocity issues that would require further investigation.

Process Date/Time: 2009-06-20 00:00:00

Process Step 6

CC ID: 321134
Description:

TerraSond, Ltd. incorporates a systematic, rigorous approach to the editing and development of survey data received from the field. This ensures the maintenance of data integrity throughout the editing process. CARIS HIPS software was used to create a folder structure organized by project, vessel, and Julian day to store data. Multibeam raw data were imported into CARIS HIPS using the CARIS conversion wizard module. The wizard was used to create a directory for each line and separate the ?.all? files into sub-files which contained individual sensor information. All data entries were time-referenced using the time associated with the ?.all? file to relate the navigation, azimuth, heave, pitch, roll and slant range depths sensor files. CARIS HIPS was used for the majority of the processing and adjustments made during sounding reduction. CARIS HIPS does not allow raw data manipulation during processing. All raw data is maintained in the original, unmodified, format to ensure data integrity. TerraSond, Ltd. uses well defined procedures during the sounding reduction process and all actions are tracked to ensure that no steps are omitted or performed out of sequence. Survey lines were initially opened in the HIPS line editor mode by selecting the project, vessel, day and desired line. Preliminary soundings were tide adjusted using predicted tide data from the National Water Level Observation Network (NWLON) station at Village Cove, St. Paul, AK (946- 4212) through June 25th, 2009. No range, amplitude, or zoning schemes were applied. Refer to Section C. Corrections to Echo Soundings, of this report, for detailed information concerning final sounding reduction. Attitude data were viewed in the CARIS Attitude Editor which displayed simultaneous graphical representation of all attitude data using a common x-axis scaled by time. The Attitude Editor, like the Navigation Editor, was used to query the data and reject erroneous values. Navigation data were reviewed using the CARIS Navigation Editor. The review consisted of a visual inspection of plotted fixes noting any gaps in the data or unusual jumps in vessel position. Discrepancies were rare and were handled on a case-by-case basis. Unusable data were rejected with interpolation using a loose Bezier curve. Data were queried for time, position, delta time, speed, and status and, if necessary, the status of the data was changed from accepted to rejected.

Process Date/Time: 2009-06-20 00:00:00

Process Step 7

CC ID: 321135
Description:

The finalized BASE surface exported in CARIS incorporated uncertainty values derived from Total Propagated Error (TPE). CARIS HIPS TPE calculation assigned a horizontal and depth error estimate to each sounding. TPE values represent, at a 95% confidence level, the difference between computed horizontal and vertical sounding positions and their true position values. CARIS HIPS computed TPE error values by aggregating individual error sources such as navigation, gyro (heading), heave, pitch, roll, tide, latency, sensor offsets and individual sonar model characteristics. Stored in the HIPS Vessel File, these error sources were obtained from manufacturers during the instrument calibration process, determined during the vessel survey (sensor offsets) or while running operational tests (patch test, settlement and squat).

Process Date/Time: 2009-06-20 00:00:00

Process Step 8

CC ID: 321136
Description:

Several finalized values were applied to the data in the final processing steps in CARIS HIPS. A verified tide file was downloaded and applied to the survey area prior to the final merge. Additionally, the locations and times of sound velocity profiles were displayed graphically to ensure that time-appropriate profiles were applied to the entire survey, each SV cast was additionally inspected for data quality. CARIS HIPS presented the option to remove the original SV values and use the CARIS SV correction algorithms. This step was employed during the final merge, ensuring consistent application of SV files to the entire dataset. Sound Velocity casts were applied based on the Previous in Time method of CARIS HIPS. Static draft observations were entered in the vessel configuration file. The measure down value used to calculate this value varied 3cm between the beginning and the end of the survey therefore for simplicity; a single value was used for static draft based on the initial measure down value. The 3cm maximum potential error accrued from the application of a single static draft value is well within the error budget of this survey. Dynamic draft values were calculated and entered in the HIPS vessel configuration file. CARIS HIPS uses dynamic draft tables based on vessel speed and not propeller pitch as was the controlled variable on-board the Mitchell. Average vessel speed was computed for the range of propeller pitches. The final processing step before TPE calculation and data export was a final merging of all data. This merge resulted in the final geographical positions of each sounding relative (horizontally) to the NAD83 ellipsoid, projected in UTM Zone 2N (m) and vertically to the Mean Lower Low Water level datum established for Village Cove, St. Paul, AK.

Process Date/Time: 2009-06-20 00:00:00

Catalog Details

Catalog Item ID: 32500
GUID: gov.noaa.nmfs.inport:32500
Metadata Record Created By: Theresa A Smith
Metadata Record Created: 2016-04-20 12:43+0000
Metadata Record Last Modified By: SysAdmin InPortAdmin
Metadata Record Last Modified: 2024-01-15 12:08+0000
Metadata Record Published: 2019-05-31
Owner Org: AFSC
Metadata Publication Status: Published Externally
Do Not Publish?: N
Metadata Last Review Date: 2019-05-31
Metadata Review Frequency: 1 Year
Metadata Next Review Date: 2020-05-31