Recolonization of the Cedar River by Pacific Salmon 2000-2015
Entity (ENT) | Northwest Fisheries Science Center (NWFSC)GUID: gov.noaa.nmfs.inport:35546 | Updated: August 9, 2022 | Published / External
Item Identification
Title: | Recolonization of the Cedar River by Pacific Salmon 2000-2015 |
---|---|
Short Name: | Recolonization of the Cedar River by Pacific Salmon 2000-2015 |
Status: | Planned |
Abstract: |
Habitat and snorkel counts of fish. |
Entity Information
Entity Type: | Spreadsheet |
---|---|
Active Version?: | Yes |
Schema Name: | PARR |
Description: |
Habitat and snorkel counts of fish. |
Data Attributes
Attribute Summary
![]() |
![]() |
Name | Type | Description |
---|---|---|---|---|
100
|
Stream | VARCHAR2 | Stream name. In this case represents Cedar River from above Landsburg Dam to Cedar Falls. | |
100
|
Season | VARCHAR2 | Season when survey was conducted. In this case all surveys were in late July to early August. | |
100
|
Year | NUMBER | Calendar year when survey was conducted. | |
100
|
Reach | NUMBER | Reach number (1-10). Defined by changes in channel gradient, valley confinement, and dominant substrate. Reach 1 starts ~200 m upstream of Landsburg Dam; Reach 10 ends at Cedar Falls a natural migration barrier. | |
100
|
Main.unit.# | VARCHAR2 | Not applicable for 2000-2004. In 2005, classified habitat types into primary channel unit or main unit. | |
100
|
Subunit.num | VARCHAR2 | Not applicable for 2000-2004. In 2005, classified habitat types into primary channel unit or main unit with sub-unit habitat types within main unit. | |
100
|
Habitat.type | VARCHAR2 | Habitat types or pools, riffles, runs, step pools, cascades, depositional and side channel units. | |
100
|
unit.area.m2 | NUMBER | Unit area (width x length) of each habitat type. Units for values are Square meter. | |
100
|
max.depth.m | NUMBER | Not always measured but represents the maximum depth in meters for each habitat unit. Measured using a stadia rod. Units for values are Meter. | |
100
|
tail.depth.m | NUMBER | Not always measured but represents the tail depth in meters for each pool unit. Measured using a stadia rod. Units for values are Meter. | |
100
|
Avg.depth.m | NUMBER | Not always measured but represents the average depth in meters for each unit. Measured using a stadia rod at the top, middle and end of each unit. Units for values are Meter. | |
100
|
residual.depth.m | NUMBER | Only measured in pool units. Difference between maximum depth and tail depth in meters. Units for values are Meter. | |
100
|
avg.vel.m.s | NUMBER | Not always measured but represents the average velocity of each unit. Measured using a Swoffer flow meter at the top, middle and bottom of each unit. Units for values are Meter. | |
100
|
trt.size1 | NUMBER | Unidentifed trout < 90 millimeters total length. Units for values are Millimeter. | |
100
|
trt.size2 | NUMBER | Unidentifed trout > 91 < 190 millimeters total length. Units for values are Millimeter. | |
100
|
trt.size3 | NUMBER | Unidentifed trout > 191 < 250 millimeters total length. Units for values are Millimeter. | |
100
|
trt.size4 | NUMBER | Unidentifed trout >251 < 330 mm total length. Units for values are Millimeter. | |
100
|
trt.size5 | NUMBER | Unidentifed trout > 331 mm total length. Units for values are Millimeter. | |
100
|
rb.size1 | NUMBER | Rainbow trout < 90 mm total length. Units for values are Millimeter. | |
100
|
rb.size2 | NUMBER | Rainbow trout > 91 < 190 mm total length. Units for values are Millimeter. | |
100
|
rb.size3 | NUMBER | Rainbow trout > 191 < 250 mm total length. Units for values are Millimeter. | |
100
|
rb.size4 | NUMBER | Rainbow trout >251 < 330 mm total length. Units for values are Millimeter. | |
100
|
rb.size5 | NUMBER | Rainbow trout > 331 mm total length. Units for values are Millimeter. | |
100
|
steelhead.adult | NUMBER | Steelhead adult. Units for values are Millimeter. | |
100
|
cutt.size1 | NUMBER | Cutthroat trout < 90 mm total length. Units for values are Millimeter. | |
100
|
cutt.size2 | NUMBER | Cutthroat trout > 91 < 190 mm total length. Units for values are Millimeter. | |
100
|
cutt.size3 | NUMBER | Cutthroat trout > 191 < 250 mm total length. Units for values are Millimeter. | |
100
|
cutt.size4 | NUMBER | Cutthroat trout >251 < 330 mm total length. Units for values are Millimeter. | |
100
|
cutt.size5 | NUMBER | Cutthroat trout > 331 mm total length. Units for values are Millimeter. | |
100
|
juvcoho | NUMBER | Juvenile coho. Units for values are Millimeter. | |
100
|
juvchinook | NUMBER | Juvenile Chinook. Units for values are Millimeter. | |
100
|
sockeye.adult | NUMBER | Sockeye adult. Units for values are Millimeter. | |
100
|
mwf.size1 | NUMBER | Mountain whitefish < 90 mm total length. Units for values are Millimeter. | |
100
|
mwf.size2 | NUMBER | Mountain whitefish trout > 91 < 190 mm total length. Units for values are Millimeter. | |
100
|
mwf.size3 | NUMBER | Mountain whitefish trout > 191 < 250 mm total length. Units for values are Millimeter. | |
100
|
mwf.siz4 | NUMBER | Mountain whitefish trout >251 < 330 mm total length. Units for values are Millimeter. | |
100
|
mwf.szie5 | NUMBER | Mountain whitefish trout > 331 mm total length. Units for values are Millimeter. | |
100
|
sculpin.size1 | NUMBER | Sculpin < 90 mm in total length. Units for values are Millimeter. | |
100
|
sculpin.size2 | NUMBER | Sculpin > 90 mm in total length. Units for values are Millimeter. | |
100
|
lamprey.size1 | NUMBER | Lamprey < 90 mm in total length. Units for values are Millimeter. | |
100
|
lamprey.size2 | NUMBER | Lamprey > 90 mm in total length. Units for values are Millimeter. | |
100
|
charr.size3 | NUMBER | Bull trout >191 < 250 mm total length. Units for values are Millimeter. | |
100
|
charr.size4 | NUMBER | Bull trout > 251 and < 330 mm in total length. Units for values are Millimeter. | |
100
|
charr.size5 | NUMBER | Bull trout > 331 mm in total length. Units for values are Millimeter. |
Attribute Details
Stream
Seq. Order: | 1 |
---|---|
Data Storage Type: | VARCHAR2 |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Stream name. In this case represents Cedar River from above Landsburg Dam to Cedar Falls. |
General Data Type: | VARCHAR2 |
Season
Seq. Order: | 2 |
---|---|
Data Storage Type: | VARCHAR2 |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Season when survey was conducted. In this case all surveys were in late July to early August. |
General Data Type: | VARCHAR2 |
Year
Seq. Order: | 3 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Calendar year when survey was conducted. |
General Data Type: | NUMBER |
Reach
Seq. Order: | 4 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Reach number (1-10). Defined by changes in channel gradient, valley confinement, and dominant substrate. Reach 1 starts ~200 m upstream of Landsburg Dam; Reach 10 ends at Cedar Falls a natural migration barrier. |
General Data Type: | NUMBER |
Main.unit.#
Seq. Order: | 5 |
---|---|
Data Storage Type: | VARCHAR2 |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Not applicable for 2000-2004. In 2005, classified habitat types into primary channel unit or main unit. |
General Data Type: | VARCHAR2 |
Subunit.num
Seq. Order: | 6 |
---|---|
Data Storage Type: | VARCHAR2 |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Not applicable for 2000-2004. In 2005, classified habitat types into primary channel unit or main unit with sub-unit habitat types within main unit. |
General Data Type: | VARCHAR2 |
Null Value Meaning: |
Subunit habitats not classified. |
Habitat.type
Seq. Order: | 7 |
---|---|
Data Storage Type: | VARCHAR2 |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Habitat types or pools, riffles, runs, step pools, cascades, depositional and side channel units. |
General Data Type: | VARCHAR2 |
unit.area.m2
Seq. Order: | 8 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Unit area (width x length) of each habitat type. Units for values are Square meter. |
General Data Type: | NUMBER |
Unit of Measure: | Square meter |
Allowed Values: | > 1 m2 |
max.depth.m
Seq. Order: | 9 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Not always measured but represents the maximum depth in meters for each habitat unit. Measured using a stadia rod. Units for values are Meter. |
General Data Type: | NUMBER |
Unit of Measure: | Meter |
Null Value Meaning: |
NA |
Allowed Values: | > 0 <10 m |
tail.depth.m
Seq. Order: | 10 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Not always measured but represents the tail depth in meters for each pool unit. Measured using a stadia rod. Units for values are Meter. |
General Data Type: | NUMBER |
Unit of Measure: | Meter |
Allowed Values: | > 0 <10 m |
Avg.depth.m
Seq. Order: | 11 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Not always measured but represents the average depth in meters for each unit. Measured using a stadia rod at the top, middle and end of each unit. Units for values are Meter. |
General Data Type: | NUMBER |
Unit of Measure: | Meter |
Allowed Values: | > 0 < 7.5 m |
residual.depth.m
Seq. Order: | 12 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Only measured in pool units. Difference between maximum depth and tail depth in meters. Units for values are Meter. |
General Data Type: | NUMBER |
Unit of Measure: | Meter |
Allowed Values: | > 0 < 7.5 m |
avg.vel.m.s
Seq. Order: | 13 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Not always measured but represents the average velocity of each unit. Measured using a Swoffer flow meter at the top, middle and bottom of each unit. Units for values are Meter. |
General Data Type: | NUMBER |
Unit of Measure: | Meter |
Allowed Values: | > 0 <5 m/s |
trt.size1
Seq. Order: | 14 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Unidentifed trout < 90 millimeters total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
trt.size2
Seq. Order: | 15 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Unidentifed trout > 91 < 190 millimeters total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
trt.size3
Seq. Order: | 16 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Unidentifed trout > 191 < 250 millimeters total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
trt.size4
Seq. Order: | 17 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Unidentifed trout >251 < 330 mm total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
trt.size5
Seq. Order: | 18 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Unidentifed trout > 331 mm total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
rb.size1
Seq. Order: | 19 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Rainbow trout < 90 mm total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
rb.size2
Seq. Order: | 20 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Rainbow trout > 91 < 190 mm total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
rb.size3
Seq. Order: | 21 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Rainbow trout > 191 < 250 mm total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
rb.size4
Seq. Order: | 22 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Rainbow trout >251 < 330 mm total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
rb.size5
Seq. Order: | 23 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Rainbow trout > 331 mm total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
steelhead.adult
Seq. Order: | 24 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Steelhead adult. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
cutt.size1
Seq. Order: | 25 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Cutthroat trout < 90 mm total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
cutt.size2
Seq. Order: | 26 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Cutthroat trout > 91 < 190 mm total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
cutt.size3
Seq. Order: | 27 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Cutthroat trout > 191 < 250 mm total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
cutt.size4
Seq. Order: | 28 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Cutthroat trout >251 < 330 mm total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
cutt.size5
Seq. Order: | 29 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Cutthroat trout > 331 mm total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
juvcoho
Seq. Order: | 30 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Juvenile coho. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
juvchinook
Seq. Order: | 31 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Juvenile Chinook. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
sockeye.adult
Seq. Order: | 32 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Sockeye adult. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
mwf.size1
Seq. Order: | 33 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Mountain whitefish < 90 mm total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
mwf.size2
Seq. Order: | 34 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Mountain whitefish trout > 91 < 190 mm total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
mwf.size3
Seq. Order: | 35 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Mountain whitefish trout > 191 < 250 mm total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
mwf.siz4
Seq. Order: | 36 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Mountain whitefish trout >251 < 330 mm total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
mwf.szie5
Seq. Order: | 37 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Mountain whitefish trout > 331 mm total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
sculpin.size1
Seq. Order: | 38 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Sculpin < 90 mm in total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
sculpin.size2
Seq. Order: | 39 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Sculpin > 90 mm in total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
lamprey.size1
Seq. Order: | 40 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Lamprey < 90 mm in total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
lamprey.size2
Seq. Order: | 41 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Lamprey > 90 mm in total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
charr.size3
Seq. Order: | 42 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Bull trout >191 < 250 mm total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
charr.size4
Seq. Order: | 43 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Bull trout > 251 and < 330 mm in total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
charr.size5
Seq. Order: | 44 |
---|---|
Data Storage Type: | NUMBER |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Bull trout > 331 mm in total length. Units for values are Millimeter. |
General Data Type: | NUMBER |
Unit of Measure: | Millimeter |
Allowed Values: | >0 |
Catalog Details
Catalog Item ID: | 35546 |
---|---|
GUID: | gov.noaa.nmfs.inport:35546 |
Metadata Record Created By: | Jeffrey W Cowen |
Metadata Record Created: | 2016-11-04 15:24+0000 |
Metadata Record Last Modified By: | SysAdmin InPortAdmin |
Metadata Record Last Modified: | 2022-08-09 17:11+0000 |
Metadata Record Published: | 2018-02-27 |
Owner Org: | NWFSC |
Metadata Publication Status: | Published Externally |
Do Not Publish?: | N |
Metadata Last Review Date: | 2018-02-27 |
Metadata Review Frequency: | 1 Year |
Metadata Next Review Date: | 2019-02-27 |