Data Management Plan
GUID: gov.noaa.nmfs.inport:49615 | Published / External
Data Management Plan
DMP Template v2.0.1 (2015-01-01)
Please provide the following information, and submit to the NOAA DM Plan Repository.Reference to Master DM Plan (if applicable)
As stated in Section IV, Requirement 1.3, DM Plans may be hierarchical. If this DM Plan inherits provisions from a higher-level DM Plan already submitted to the Repository, then this more-specific Plan only needs to provide information that differs from what was provided in the Master DM Plan.
1. General Description of Data to be Managed
This metadata record describes the Classified Point Cloud (LAS) for the 2016 Connecticut LiDAR project covering approximately 5240 square miles in seven blocks. The Leica ALS-70-HP and Riegl LMS-Q680i systems were used to collect data for the survey campaign.
Notes: Only a maximum of 4000 characters will be included.
Notes: Data collection is considered ongoing if a time frame of type "Continuous" exists.
Notes: All time frames from all extent groups are included.
Notes: All geographic areas from all extent groups are included.
(e.g., digital numeric data, imagery, photographs, video, audio, database, tabular data, etc.)
(e.g., satellite, airplane, unmanned aerial system, radar, weather station, moored buoy, research vessel, autonomous underwater vehicle, animal tagging, manual surveys, enforcement activities, numerical model, etc.)
2. Point of Contact for this Data Management Plan (author or maintainer)
Notes: The name of the Person of the most recent Support Role of type "Metadata Contact" is used. The support role must be in effect.
Notes: The name of the Organization of the most recent Support Role of type "Metadata Contact" is used. This field is required if applicable.
3. Responsible Party for Data Management
Program Managers, or their designee, shall be responsible for assuring the proper management of the data produced by their Program. Please indicate the responsible party below.
Notes: The name of the Person of the most recent Support Role of type "Data Steward" is used. The support role must be in effect.
4. Resources
Programs must identify resources within their own budget for managing the data they produce.
5. Data Lineage and Quality
NOAA has issued Information Quality Guidelines for ensuring and maximizing the quality, objectivity, utility, and integrity of information which it disseminates.
(describe or provide URL of description):
Lineage Statement:
Lidar data collected over the state of Connecticut and processed to a classified point cloud. Ingested into the Digital Coast Data Access Viewer system.
Process Steps:
- 2016-01-01 00:00:00 - At selected locations throughout the site, accurate GPS coordinates and elevations are surveyed and the points are marked with targets. | Source Produced: Ground control
- 2016-01-01 00:00:00 - New LiDAR data is captured for the project area using a Leica ALS70 LiDAR instrument an integrated IPAS20 GPS/INS system mounted within a Aero Commander twin engine airplane.
- 2016-01-01 00:00:00 - The airborne GPS data is post-processed in Inertial Explorer software and LEICA CloudPro software to determine the LiDAR sensor's angle and orientation in the terrain (project) coordinate system and datums during the survey.
- 2016-01-01 00:00:00 - The post processed GPS/INS solution is applied to the raw lidar data to orient and project the data points into the project area reference system as an unclassified point cloud. | Source Produced: Classified lidar
- 2016-01-01 00:00:00 - The georeferenced lidar data is then classified and edited in Terrasolid Terrascan software. Data is classified to produce: Class 1: unclassified, Class 2: ground, Class 7: low point, Class 9: water, Class 10: ignored ground, Class 17: bridge deck, Class 18: high noise. | Source Produced: Classified lidar
- 2016-01-01 00:00:00 - The classified lidar data is exported as 2500 X 2500 foot tiles in the LAS format with any or all classes required to produce derivative products. | Source Produced: Classified lidar
- 2017-10-01 00:00:00 - The NOAA Office for Coastal Management (OCM) received the files in las 1.4 format. The files contained Lidar elevation and intensity measurements. The data were in Connecticut State Plane (NAD83 2011 Epoch 2010.0; FIPS 0600), US Feet coordinates and NAVD88 (Geoid12b) vertical feet. OCM performed the following processing to the data to make it available within the Digital Coast: 1. The data were converted from Connecticut State Plane coordinates to geographic coordinates. 2. The vertical units of the data were converted from feet to meters. 3. The data were converted from NAVD88 (orthometric) heights to NAD83(2011) ellipsoid heights using Geoid12b grids. 4. Data were compressed with laszip as native LAS 1.4. (Citation: Classified lidar)
(describe or provide URL of description):
6. Data Documentation
The EDMC Data Documentation Procedural Directive requires that NOAA data be well documented, specifies the use of ISO 19115 and related standards for documentation of new data, and provides links to resources and tools for metadata creation and validation.
Missing/invalid information:
- 1.7. Data collection method(s)
- 3.1. Responsible Party for Data Management
- 4.1. Have resources for management of these data been identified?
- 4.2. Approximate percentage of the budget for these data devoted to data management
- 5.2. Quality control procedures employed
- 7.1. Do these data comply with the Data Access directive?
- 7.1.1. If data are not available or has limitations, has a Waiver been filed?
- 7.1.2. If there are limitations to data access, describe how data are protected
- 7.3. Data access methods or services offered
- 7.4. Approximate delay between data collection and dissemination
- 8.1. Actual or planned long-term data archive location
- 8.3. Approximate delay between data collection and submission to an archive facility
- 8.4. How will the data be protected from accidental or malicious modification or deletion prior to receipt by the archive?
(describe or provide URL of description):
7. Data Access
NAO 212-15 states that access to environmental data may only be restricted when distribution is explicitly limited by law, regulation, policy (such as those applicable to personally identifiable information or protected critical infrastructure information or proprietary trade information) or by security requirements. The EDMC Data Access Procedural Directive contains specific guidance, recommends the use of open-standard, interoperable, non-proprietary web services, provides information about resources and tools to enable data access, and includes a Waiver to be submitted to justify any approach other than full, unrestricted public access.
This data may be used by the requesting party at their own risk and may be re-distributed.
Notes: The name of the Organization of the most recent Support Role of type "Distributor" is used. The support role must be in effect. This information is not required if an approved access waiver exists for this data.
Notes: This field is required if a Distributor has not been specified.
https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/8392/index.html
Notes: All URLs listed in the Distribution Info section will be included. This field is required if applicable.
Notes: This field is required if applicable.
8. Data Preservation and Protection
The NOAA Procedure for Scientific Records Appraisal and Archive Approval describes how to identify, appraise and decide what scientific records are to be preserved in a NOAA archive.
(Specify NCEI-MD, NCEI-CO, NCEI-NC, NCEI-MS, World Data Center (WDC) facility, Other, To Be Determined, Unable to Archive, or No Archiving Intended)
Notes: This field is required if archive location is World Data Center or Other.
Notes: This field is required if archive location is To Be Determined, Unable to Archive, or No Archiving Intended.
Notes: Physical Location Organization, City and State are required, or a Location Description is required.
Discuss data back-up, disaster recovery/contingency planning, and off-site data storage relevant to the data collection
9. Additional Line Office or Staff Office Questions
Line and Staff Offices may extend this template by inserting additional questions in this section.