Data Management Plan
DMP Template v2.0.1 (2015-01-01)Please provide the following information, and submit to the NOAA DM Plan Repository.
Reference to Master DM Plan (if applicable)
As stated in Section IV, Requirement 1.3, DM Plans may be hierarchical. If this DM Plan inherits provisions from a higher-level DM Plan already submitted to the Repository, then this more-specific Plan only needs to provide information that differs from what was provided in the Master DM Plan.
1. General Description of Data to be Managed
LiDAR data was collected by Merrick & Company from September through December of 2007 for the Florida Division of
Emergency Management (FDEM). The project area is located in the southeastern part of Florida, in parts of the counties surrounding
Lake Okeechobee. LiDAR was collected over approximately 2289 square miles in parts of the following counties: Broward, Glades,
Hendry, Highlands, Martin, Okeechobee, and Palm Beach. The maximum point spacing is 4 ft in unobscured areas. This data set
is a classified data set and has a classification for sugar cane.
Original contact information:
Contact Org: Florida DEM
Notes: Only a maximum of 4000 characters will be included.
Notes: Data collection is considered ongoing if a time frame of type "Continuous" exists.
Notes: All time frames from all extent groups are included.
Notes: All geographic areas from all extent groups are included.
(e.g., digital numeric data, imagery, photographs, video, audio, database, tabular data, etc.)
(e.g., satellite, airplane, unmanned aerial system, radar, weather station, moored buoy, research vessel, autonomous underwater vehicle, animal tagging, manual surveys, enforcement activities, numerical model, etc.)
2. Point of Contact for this Data Management Plan (author or maintainer)
Notes: The name of the Person of the most recent Support Role of type "Metadata Contact" is used. The support role must be in effect.
Notes: The name of the Organization of the most recent Support Role of type "Metadata Contact" is used. This field is required if applicable.
3. Responsible Party for Data Management
Program Managers, or their designee, shall be responsible for assuring the proper management of the data produced by their Program. Please indicate the responsible party below.
Notes: The name of the Person of the most recent Support Role of type "Data Steward" is used. The support role must be in effect.
Programs must identify resources within their own budget for managing the data they produce.
5. Data Lineage and Quality
NOAA has issued Information Quality Guidelines for ensuring and maximizing the quality, objectivity, utility, and integrity of information which it disseminates.
(describe or provide URL of description):
- 2009-01-01 00:00:00 - The ABGPS, IMU, and raw Leica ALS50 Phase 2 Plus LiDAR data are integrated with Leica Incorporated's ALS Post Processor software. The resultant file is in a LAS binary file format. The LAS file version 1.1 format can be easily transferred from one file format to another. It is a binary file format that maintains information specific to the LiDAR data (return#, intensity value, xyz, etc.). The resultant points are produced in the geodetic coordinates referenced to the NAD83 HARN horizontal datum and NAVD88 vertical datum. The date and time for each flight line can be determined using the Julian date and time. The Julian date is a continuous count of days and fractions since noon Universal Time on January 1, 4713 BCE on the Julian calendar.
- 2009-01-01 00:00:00 - The unedited data are classified to facilitate the application of the appropriate feature extraction filters. A combination of proprietary filters are applied as appropriate for the production of bare earth digital terrain models (dtms). Interactive editing methods are applied to those areas where it is inappropriate or impossible to use the feature extraction filters, based upon the design criteria and/or limitations of the relevant filters. These same feature extraction filters are used to produce elevation height surfaces. The LiDAR mass points were delivered in American Society for Photogrammetry and Remote Sensing LAS 1.1 format. The header file for each dataset is complete as defined by the LAS 1.1 specification. In addition the following fields are included: Flight Date Julian, Year, and Class. The LAS files do not contain overlap (class 12). The data was classified as follows: Class 1 = Unclassified. This class includes vegetation, buildings, etc. Class 2 = Ground Class 3 = Sugarcane (Job specific classification, not used in contour generation) Class 7 = Noise Class 9 = Water Class 12 = Overlap Sugarcane points (class 3) were added to this project at the request of the US Army Corps of Engineers. The lidar sensor could not adequately penetrate sugarcane fields. A method was developed to define the location of sugarcane. Points inside of the sugar_cane feature class in the HHD geodatabase were either classified as unclassified (class = 1) or sugarcane (class = 3). There are no ground (class = 2) points inside of the sugar_cane feature class.
- 2010-01-01 00:00:00 - The NOAA Office for Coastal Management (OCM) received files in LAS format. The files contained LiDAR intensity and elevation measurements. OCM performed the following processing on the data to make it available within Digital Coast: 1. The data were converted from State Plane Florida East coordinates to geographic coordinates. 2. The data were converted from NAVD88 heights to ellipsoid heights using Geoid03. 3. The LAS header fields were sorted by latitude and updated.
(describe or provide URL of description):
6. Data Documentation
The EDMC Data Documentation Procedural Directive requires that NOAA data be well documented, specifies the use of ISO 19115 and related standards for documentation of new data, and provides links to resources and tools for metadata creation and validation.
- 1.6. Type(s) of data
- 1.7. Data collection method(s)
- 3.1. Responsible Party for Data Management
- 4.1. Have resources for management of these data been identified?
- 4.2. Approximate percentage of the budget for these data devoted to data management
- 5.2. Quality control procedures employed
- 7.1. Do these data comply with the Data Access directive?
- 7.1.1. If data are not available or has limitations, has a Waiver been filed?
- 7.1.2. If there are limitations to data access, describe how data are protected
- 7.4. Approximate delay between data collection and dissemination
- 8.1. Actual or planned long-term data archive location
- 8.3. Approximate delay between data collection and submission to an archive facility
- 8.4. How will the data be protected from accidental or malicious modification or deletion prior to receipt by the archive?
(describe or provide URL of description):
7. Data Access
NAO 212-15 states that access to environmental data may only be restricted when distribution is explicitly limited by law, regulation, policy (such as those applicable to personally identifiable information or protected critical infrastructure information or proprietary trade information) or by security requirements. The EDMC Data Access Procedural Directive contains specific guidance, recommends the use of open-standard, interoperable, non-proprietary web services, provides information about resources and tools to enable data access, and includes a Waiver to be submitted to justify any approach other than full, unrestricted public access.
Notes: The name of the Organization of the most recent Support Role of type "Distributor" is used. The support role must be in effect. This information is not required if an approved access waiver exists for this data.
Notes: This field is required if a Distributor has not been specified.
Notes: All URLs listed in the Distribution Info section will be included. This field is required if applicable.
This data can be obtained on-line at the following URL: https://coast.noaa.gov/dataviewer;
Notes: This field is required if applicable.
8. Data Preservation and Protection
The NOAA Procedure for Scientific Records Appraisal and Archive Approval describes how to identify, appraise and decide what scientific records are to be preserved in a NOAA archive.
(Specify NCEI-MD, NCEI-CO, NCEI-NC, NCEI-MS, World Data Center (WDC) facility, Other, To Be Determined, Unable to Archive, or No Archiving Intended)
Notes: This field is required if archive location is World Data Center or Other.
Notes: This field is required if archive location is To Be Determined, Unable to Archive, or No Archiving Intended.
Notes: Physical Location Organization, City and State are required, or a Location Description is required.
Discuss data back-up, disaster recovery/contingency planning, and off-site data storage relevant to the data collection
9. Additional Line Office or Staff Office Questions
Line and Staff Offices may extend this template by inserting additional questions in this section.