Slide Menu
Search Help Show/Hide Menu
Short Citation:
OCM Partners, 2023: 2007 Florida Division of Emergency Management (FDEM) Lidar Project: Coastal Okaloosa County,

Item Identification

Title: 2007 Florida Division of Emergency Management (FDEM) Lidar Project: Coastal Okaloosa County
Short Name: fdem2007_okaloosa_coastal_m562_metadata
Status: Completed
Publication Date: 2008-05-05

This Light Detection and Ranging (LiDAR) LAS dataset is a topographic survey conducted for a coalition of GIS practitioners,

including the Florida Division of Emergency Management (FDEM), Florida Water Management Districts, Florida Fish and Wildlife

Conservation Commission, Florida Department of Environmental Protection, Army Corps of Engineers Jacksonville District, and

other state and federal agencies. The goal for this project is to use the LiDAR data as new elevation inputs for updated SLOSH

data grids. The ultimate result is the update of the Regional Hurricane Evacuation Studies (RHES) for the state. The State of Florida

Division of Emergency Management LiDAR Survey was collected under the guidance of a Professional Mapper/Surveyor.

Data were collected for 167 square miles in coastal Okaloosa County, Florida from July 15, 2007 to August 21, 2007. This is a classified

lidar data set. The data are classified: 1 = Unclassified, 2 = Ground (Bare Earth), 7 = Noise and 9 = Water. The FDEM Baseline Specifications

required a maximum post spacing of 4 feet, however, the PDS (Program and Data Solutions) team required a much higher point density of its

subcontractors in order to increase the probability of penetrating dense foliage during the mandated summer acquisition; with nominal post

spacing of 0.7 meters per flight line and 50% sidelap between flight lines, the average point density is 4 points per square meter.

Original contact information:

Contact Org: Florida DEM

Phone: 850-413-9907



The LiDAR topographic mapping survey is to support the Florida Division of Emergency Management (FDEM) development and maintenance

of Regional Hurricane Evacuations Studies (RHES), which include vulnerability assessments, and to assist disaster response

personnel in understanding the threats to Florida's citizens and visitors. Additional intended uses for this survey are growth

management, map modernization/floodplain mapping, natural lands stewardship, and homeland security planning.



Supplemental Information:

A complete description of this dataset is available in the Minimum Technical Standard (MTS report) "Final Report of Specific Purpose

LiDAR Survey - LiDAR-Generated Breaklines and Contours" submitted to Florida Division of Emergency Management.

This report may be accessed at:

A footprint of this data set may be viewed in Google Earth at:


Theme Keywords

Thesaurus Keyword
ISO 19115 Topic Category

Physical Location

Organization: Office for Coastal Management
City: Charleston
State/Province: SC

Data Set Information

Data Set Scope Code: Data Set
Maintenance Frequency: As Needed
Distribution Liability:

Any conclusions drawn from the analysis of this information are not the responsibility of FDEM, the Office for Coastal Management or its partners.

Support Roles

Data Steward

CC ID: 672223
Date Effective From: 2008-05-05
Date Effective To:
Contact (Organization): NOAA Office for Coastal Management (NOAA/OCM)
Address: 2234 South Hobson Ave
Charleston, SC 29405-2413
Email Address:
Phone: (843) 740-1202


CC ID: 672225
Date Effective From: 2008-05-05
Date Effective To:
Contact (Organization): NOAA Office for Coastal Management (NOAA/OCM)
Address: 2234 South Hobson Ave
Charleston, SC 29405-2413
Email Address:
Phone: (843) 740-1202

Metadata Contact

CC ID: 672226
Date Effective From: 2008-05-05
Date Effective To:
Contact (Organization): NOAA Office for Coastal Management (NOAA/OCM)
Address: 2234 South Hobson Ave
Charleston, SC 29405-2413
Email Address:
Phone: (843) 740-1202

Point of Contact

CC ID: 672224
Date Effective From: 2008-05-05
Date Effective To:
Contact (Organization): NOAA Office for Coastal Management (NOAA/OCM)
Address: 2234 South Hobson Ave
Charleston, SC 29405-2413
Email Address:
Phone: (843) 740-1202


Currentness Reference: Ground Condition

Extent Group 1

Extent Group 1 / Geographic Area 1

CC ID: 1139036
W° Bound: -86.798479
E° Bound: -86.366291
N° Bound: 30.554057
S° Bound: 30.367834

Extent Group 1 / Time Frame 1

CC ID: 1139035
Time Frame Type: Range
Start: 2007-07-15
End: 2007-08-21

Spatial Information

Spatial Representation

Representations Used

Vector: Yes

Access Information

Security Class: Unclassified
Data Access Procedure:

This data can be obtained on-line at the following URL:;

Data Access Constraints:


Data Use Constraints:

Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no longer

represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations.

Distribution Information

Distribution 1

CC ID: 740690
Download URL:
File Name: Customized Download

Create custom data files by choosing data area, product type, map projection, file format, datum, etc.

Distribution 2

CC ID: 740691
Download URL:
File Name: Bulk Download

Simple download of data files.



CC ID: 740693
URL Type:
Online Resource


CC ID: 740694
URL Type:
Online Resource

Activity Log

Activity Log 1

CC ID: 672239
Activity Date/Time: 2016-05-23

Date that the source FGDC record was last modified.

Activity Log 2

CC ID: 672238
Activity Date/Time: 2017-11-14

Converted from FGDC Content Standards for Digital Geospatial Metadata (version FGDC-STD-001-1998) using '' script. Contact Tyler Christensen (NOS) for details.

Activity Log 3

CC ID: 718224
Activity Date/Time: 2018-02-08

Partial upload of Positional Accuracy fields only.

Activity Log 4

CC ID: 740692
Activity Date/Time: 2018-03-13

Partial upload to move data access links to Distribution Info.

Technical Environment


Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 2; ESRI ArcCatalog

Data Quality

Horizontal Positional Accuracy:

Lidar source compiled to meet 1m horizontal accuracy.; Quantitative Value: 1 meters, Test that produced the value:

The PDS team does not perform independent horizontal accuracy testing on the LiDAR. LiDAR vendors perform calibrations on the

LiDAR sensor and compare data to adjoining flight lines to ensure LiDAR meets the 1 meter horizontal accuracy standard at the

95% confidence level.

Vertical Positional Accuracy:

The LiDAR is required to meet 0.60 feet Fundamental Vertical Accuracy (FVA) and 1.19 feet

Consolidated Vertical Accuracy (CVA).

; Quantitative Value: 0.15 meters, Test that produced the value:

Based on the vertical accuracy testing conducted by PDS, using NSSDA and FEMA methodology, vertical accuracy at the 95% confidence

level (called Accuracyz) is computed by the formula RMSEz x 1.9600. The dataset for Okaloosa County, Florida satisfies the criteria:

Countywide lidar dataset tested 0.49 ft (0.15 m) FVA vertical accuracy at 95% confidence level in open terrain, based on open terrain

RMSEz (0.25 ft) x 1.9600.

Countywide lidar dataset tested 0.78 ft (0.24 m) CVA vertical accuracy at 95% confidence level in all land cover categories combined, based on

consolidated RMSEz (0.40 ft) x 1.9600.

Completeness Report:

A visual qualitative assessment was performed in the source Lidar dataset.

Conceptual Consistency:

Data covers the tile scheme provided for the county.




CC ID: 1139029
Publish Date: 2008-05-01
Extent Type: Range
Extent Start Date/Time: 2007-07-15
Extent End Date/Time: 2007-08-21
Source Contribution:

LiDAR dataset was used to create intensity stereopairs for 3D breakline compilation and for contour generation. | Source Geospatial Form: vector digital data | Type of Source Media: online

Process Steps

Process Step 1

CC ID: 1139030

The ABGPS, IMU, and raw Leica ALS-50 LiDAR data are integrated into the LEICA ALS post processor software. The resultant file is in a LAS

binary file format. The LAS file version 1.1 formats can be easily transferred from one file format to another. It is a binary file format

that maintains information specific to the LiDAR data (return#, intensity value, xyz, etc.). The resultant points are produced in the

geodetic coordinates referenced to the NAD83 horizontal datum and GRS80 vertical datum. The date and time for each flight line can be

determined using the Julian date and time. The Julian date is a continuous count of days and fractions since noon Universal Time on

January 1, 4713 BCE on the Julian calendar.

Process Date/Time: 2008-01-01 00:00:00

Process Step 2

CC ID: 1139031

The unedited data are classified to facilitate the application of the appropriate feature extraction filters. A combination of proprietary

filters are applied as appropriate for the production of bare earth digital terrain models (dtms). Interactive editing methods are applied

to those areas where it is inappropriate or impossible to use the feature extraction filters, based upon the design criteria and/or limitations

of the relevant filters. These same feature extraction filters are used to produce elevation height surfaces. The LiDAR mass points were

delivered in American Society for Photogrammetry and Remote Sensing LAS 1.1 format. The header file for each dataset is complete as defined by

the LAS 1.1 specification. In addition the following fields are included: Flight Date Julian, Year, and Class. The LAS files do not include


The data was classified as follows:

Class 1 = Unclassified. This class includes vegetation, buildings, etc.

Class 2 = Ground

Class 7 = Noise

Class 9 = Water

Process Date/Time: 2008-01-01 00:00:00

Process Step 3

CC ID: 1139032

Conversion from Geodetic coordinates, NAD83 into State Plane coordinates (U.S. Survey Feet) NAD83 HARN and conversion from ellipsoid heights

(meters) into orthometric heights (U.S. Survey Feet).

Process Date/Time: 2008-01-01 00:00:00

Process Step 4

CC ID: 1139033

The NOAA Office for Coastal Management (OCM) received files in LAS format. The files contained LiDAR intensity and elevation measurements.

OCM performed the following processing on the data for data storage purposes and Digital Coast provisioning:

1. The data were converted from State Plane Florida West coordinates to geographic coordinates.

2. The data were converted from NAVD88 heights to ellipsoid heights using Geoid03.

3. The LAS header fields were sorted by latitude and updated.

Process Date/Time: 2011-01-01 00:00:00

Child Items

Rubric scores updated every 15m

Rubric Score Type Title
Entity LAS

Catalog Details

Catalog Item ID: 49676
GUID: gov.noaa.nmfs.inport:49676
Metadata Record Created By: Anne Ball
Metadata Record Created: 2017-11-15 15:21+0000
Metadata Record Last Modified By: SysAdmin InPortAdmin
Metadata Record Last Modified: 2022-08-09 17:11+0000
Metadata Record Published: 2022-03-16
Owner Org: OCMP
Metadata Publication Status: Published Externally
Do Not Publish?: N
Metadata Last Review Date: 2022-03-16
Metadata Review Frequency: 1 Year
Metadata Next Review Date: 2023-03-16