Data Management Plan
GUID: gov.noaa.nmfs.inport:49731 | Published / External
Data Management Plan
DMP Template v2.0.1 (2015-01-01)
Please provide the following information, and submit to the NOAA DM Plan Repository.Reference to Master DM Plan (if applicable)
As stated in Section IV, Requirement 1.3, DM Plans may be hierarchical. If this DM Plan inherits provisions from a higher-level DM Plan already submitted to the Repository, then this more-specific Plan only needs to provide information that differs from what was provided in the Master DM Plan.
1. General Description of Data to be Managed
This data set is the topographic elevation point data derived from multiple return light detection and ranging (LiDAR) measurements for seven
counties in Georgia. These counties are: Bibb, Harris, Heard, Jasper, Jones, Monroe, and Walton. The Statement of Work (SOW) was developed
by the National Oceanic and Atmospheric Administration's (NOAA) Office for Coastal Management (referred to as the Center) in partnership
with the Georgia Department of Natural Resources (GADNR) Environmental Protection Division (EPD). The data included hydro flattened DEMs for
inclusion into the National Elevation Dataset (NED).
LiDAR was collected as weather permitted between March 2 and April 14, 2011. In all, a total of 2570 square miles were collected in 390
flightlines. The data were collected at 1.0 point per square meter (1.0 m GSD) for the seven "inland" counties in Georgia. This area was
flown during snow free and leaf-off conditions.
The data contains las points with the following classifications:
Class -1 No Classification
Class 2 Ground
Class 7 Low Point (Noise)
Class 9 Water
Class 10 Land below sea level
Class 12 Overlap
Notes: Only a maximum of 4000 characters will be included.
Notes: Data collection is considered ongoing if a time frame of type "Continuous" exists.
Notes: All time frames from all extent groups are included.
Notes: All geographic areas from all extent groups are included.
(e.g., digital numeric data, imagery, photographs, video, audio, database, tabular data, etc.)
(e.g., satellite, airplane, unmanned aerial system, radar, weather station, moored buoy, research vessel, autonomous underwater vehicle, animal tagging, manual surveys, enforcement activities, numerical model, etc.)
2. Point of Contact for this Data Management Plan (author or maintainer)
Notes: The name of the Person of the most recent Support Role of type "Metadata Contact" is used. The support role must be in effect.
Notes: The name of the Organization of the most recent Support Role of type "Metadata Contact" is used. This field is required if applicable.
3. Responsible Party for Data Management
Program Managers, or their designee, shall be responsible for assuring the proper management of the data produced by their Program. Please indicate the responsible party below.
Notes: The name of the Person of the most recent Support Role of type "Data Steward" is used. The support role must be in effect.
4. Resources
Programs must identify resources within their own budget for managing the data they produce.
5. Data Lineage and Quality
NOAA has issued Information Quality Guidelines for ensuring and maximizing the quality, objectivity, utility, and integrity of information which it disseminates.
(describe or provide URL of description):
Process Steps:
- 2011-01-01 00:00:00 - Applanix software was used in the post processing of the airborne GPS and inertial data that is critical to the positioning and orientation of the sensor during all flights. POSPac MMS provides the smoothed best estimate of trajectory (SBET) that is necessary for Optech's post processor to develop the point cloud from the LiDAR missions. The point cloud is the mathematical three dimensional collection of all returns from all laser pulses as determined from the aerial mission. At this point this data is ready for analysis, classification, and filtering to generate a bare earth surface modelin which the above ground features are removed from the data set. The point cloud was manipulated within the Optech or Leica software; GeoCue, TerraScan, and TerraModeler software was used for the automated data classification, manual cleanup, and bare earth generation from this data. Project specific macros were used to classify the ground and to remove the side overlap between parallel flight lines. All data was manually reviewed and any remaining artifacts removed using functionality provided by TerraScan and TerraModeler. Class 2 LIDAR was used to create a bare earth surface model. The surface model was then used to heads-up digitize 2D breaklines of inland streams and rivers. Inland Ponds and Lakes of 0.5 acres or greater were also collected along with the Coastal Shoreline for the ten "coastal" counties and 2.0 acres for the seven "inland" counties. Elevation values were assigned to all Inland Ponds, Lakes, and Shorelines using TerraModeler functionality. Elevation values were assigned to all Inland streams and rivers using Photo Science proprietary software. All Class 2 LIDAR data falling inside of the collected breaklines were then classified to Class 9 and Class 2 LIDAR data falling within a proximity of three feet will be classified to Class 10 using TerraScan macro functionality. The breakline files were translated to ESRI Shapefile format using ESRI conversion tools. Data was then run through additional macros to ensure deliverable classification levels matching LAS ASPRS Classification structure. GeoCue functionality was used to ensure correct LAS Version. In house software was used as a final QA/QC check to provide LAS Analysis of the delivered tiles. Tiles were run through automated scripting within ArcMap and were combined with the Hydro Flattened Breaklines to create the 4' DEM. Final DEM tiles were clipped to the tile boundary in order to provide a seamless dataset. A manual QA review of the tiles was completed in ArcMap and Global Mapper to ensure full coverage with no gaps or slivers within the project area. (Citation: LiDAR)
- 2012-08-01 00:00:00 - The NOAA Office for Coastal Management (OCM) received the files in las format. The files contained lidar elevation and intensity measurements. The data were in State Plane projection (NAD83, Georgia West), and vertically referenced to NAVD88 using the Geoid 09 model. Both horizontal and vertical units were in survey feet. OCM performed the following processing for data storage and Digital Coast provisioning purposes: 1. The data were converted from Georgia State Plane coordinates to geographic (NAD83) coordinates. 2. The data were converted from orthometric (NAVD88) heights to ellipsoidal heights (GRS80) using Geoid 09. 3. The data were converted from vertical units of survey feet to meters 4. Elevation outliers were removed.
(describe or provide URL of description):
6. Data Documentation
The EDMC Data Documentation Procedural Directive requires that NOAA data be well documented, specifies the use of ISO 19115 and related standards for documentation of new data, and provides links to resources and tools for metadata creation and validation.
Missing/invalid information:
- 1.6. Type(s) of data
- 1.7. Data collection method(s)
- 3.1. Responsible Party for Data Management
- 4.1. Have resources for management of these data been identified?
- 4.2. Approximate percentage of the budget for these data devoted to data management
- 5.2. Quality control procedures employed
- 7.1. Do these data comply with the Data Access directive?
- 7.1.1. If data are not available or has limitations, has a Waiver been filed?
- 7.1.2. If there are limitations to data access, describe how data are protected
- 7.4. Approximate delay between data collection and dissemination
- 8.1. Actual or planned long-term data archive location
- 8.3. Approximate delay between data collection and submission to an archive facility
- 8.4. How will the data be protected from accidental or malicious modification or deletion prior to receipt by the archive?
(describe or provide URL of description):
7. Data Access
NAO 212-15 states that access to environmental data may only be restricted when distribution is explicitly limited by law, regulation, policy (such as those applicable to personally identifiable information or protected critical infrastructure information or proprietary trade information) or by security requirements. The EDMC Data Access Procedural Directive contains specific guidance, recommends the use of open-standard, interoperable, non-proprietary web services, provides information about resources and tools to enable data access, and includes a Waiver to be submitted to justify any approach other than full, unrestricted public access.
None
Notes: The name of the Organization of the most recent Support Role of type "Distributor" is used. The support role must be in effect. This information is not required if an approved access waiver exists for this data.
Notes: This field is required if a Distributor has not been specified.
https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/1390/index.html
Notes: All URLs listed in the Distribution Info section will be included. This field is required if applicable.
This data can be obtained on-line at the following URL:
https://coast.noaa.gov/dataviewer/#/lidar/search/where:ID=1390
;
Notes: This field is required if applicable.
8. Data Preservation and Protection
The NOAA Procedure for Scientific Records Appraisal and Archive Approval describes how to identify, appraise and decide what scientific records are to be preserved in a NOAA archive.
(Specify NCEI-MD, NCEI-CO, NCEI-NC, NCEI-MS, World Data Center (WDC) facility, Other, To Be Determined, Unable to Archive, or No Archiving Intended)
Notes: This field is required if archive location is World Data Center or Other.
Notes: This field is required if archive location is To Be Determined, Unable to Archive, or No Archiving Intended.
Notes: Physical Location Organization, City and State are required, or a Location Description is required.
Discuss data back-up, disaster recovery/contingency planning, and off-site data storage relevant to the data collection
9. Additional Line Office or Staff Office Questions
Line and Staff Offices may extend this template by inserting additional questions in this section.