2014 USACE NWP Topobathy Lidar: Coos Bay (OR)
Data Set (DS) | OCM Partners (OCMP)GUID: gov.noaa.nmfs.inport:49941 | Updated: August 9, 2022 | Published / External
Summary
Short Citation
OCM Partners, 2024: 2014 USACE NWP Topobathy Lidar: Coos Bay (OR), https://www.fisheries.noaa.gov/inport/item/49941.
Full Citation Examples
These data were collected on behalf of the USACE, Northwest Division, Portland District (NWP) in the area of Coos Bay, Oregon. These files contain classified topo/bathy lidar data. Data are classified as 1 (valid non-ground topographic data), 2 (valid ground topographic data), and 29 (valid bathymetric data). Classes 1 and 2 are defined in accordance with the American Society for Photogrammetry and Remote Sensing (ASPRS) classification standards. These data were collected by the Coastal Zone Mapping and Imaging Lidar (CZMIL) system. CZMIL integrates a lidar sensor with simultaneous topographic and bathymetric capabilities, a digital camera and a hyperspectral imagery on a single remote sensing platform for use in coastal mapping and charting activities. Native lidar data is not generally in a format accessible to most Geographic Information Systems (GIS). Specialized in-house and commercial software packages are used to process the native lidar data into 3-dimensional positions that can be imported into GIS software for visualization and further analysis. Horizontal positions, are in decimal degrees of latitude and longitude, referenced to the North American Datum of 1983 National Adjustment of 2011. Vertical positions were collected to the NAD83(2011) ellipsoid and in meters. The National Geodetic Survey's (NGS) GEOID12A model was used to transform the vertical positions from ellipsoid to orthometric heights referenced to the North American Vertical Datum of 1988 (NAVD88). The 3-D position data are sub-divided into a series of LAS files, which are tiled into quarter-quads or 5 km boxes. In addition to the lidar point data, Digital Elevation Models(DEMs), created from the lidar point data are also available. DEMs were created from all classes of points (1, 2, 29) at a 1 meter and 5 meter grid size and bare earth DEMs were created from the ground and bathymetric data classes (2, 29) at a 1 meter grid size. These products have not been reviewed by the NOAA Office for Coastal Management (OCM) and any conclusions drawn from the analysis of this information are not the responsibility of NOAA or OCM. The data are available upon request via email at: coastal.info@noaa.gov. Please provide the name of the data set and "DEM Request" in the subject line.
Original contact information:
Contact Org: JALBTCX
Title: Data Production Manager
Phone: 228-252-1131
Email: JALBTCX@usace.army.mil
Distribution Information
-
Create custom data files by choosing data area, product type, map projection, file format, datum, etc.
-
Simple download of data files.
None. These data have been developed from the best available sources. Although efforts have been made to ensure that the data are accurate and reliable, errors and variable conditions originating from physical sources used to develop the data may be reflected in the data supplied. Users must be aware of these conditions and bear responsibility for the appropriate use of the information with respect to possible errors, scale, resolution, rectification, positional accuracy, development methodology, time period, environmental and climatic conditions and other circumstances specific to these data. The user is responsible for understanding the accuracy limitations of the data provided herein. The burden for determining fitness for use lies entirely with the user. The user should refer to the accompanying metadata notes for a description of the data and data development procedures.
These data depict the heights at the time of the survey and are only accurate for that time. Acknowledgment of the Joint Airborne Lidar Bathymetry Technical Center of eXpertise (JALBTCX) would be appreciated in any publications or derived products. The data herein, including but not limited to geographic data, tabular data, analytical data, electronic data structures or files, are provided "as is" without warranty of any kind, either expressed or implied, or statutory, including, but not limited to, the implied warranties or merchantability and fitness for a particular purpose. The entire risk as to the quality and performance of the data is assumed by the user. No guarantee of accuracy is granted, nor is any responsibility for reliance thereon assumed. In no event shall the U.S. Army Corps of Engineers, Mobile District Office, Spatial Data Branch be liable for direct, indirect, incidental, consequential or special damages of any kind, including, but not limited to, loss of anticipated profits or benefits arising out of use of or reliance on the data. The Spatial Data Branch does not accept liability for any damages or misrepresentation caused by inaccuracies in the data or as a result of changes to the data caused by system transfers or other transformations or conversions, nor is there responsibility assumed to maintain the data in any manner or form. Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations.
Controlled Theme Keywords
BATHYMETRY, COASTAL ELEVATION, COASTAL LANDFORMS, COASTAL PROCESSES, DOD/USARMY/USACE/SAM/MOBILE/OPJ/JALBTCX, elevation, imageryBaseMapsEarthCover, LAND USE CLASSES, oceans, SEAFLOOR TOPOGRAPHY, TERRAIN ELEVATION
Child Items
No Child Items for this record.
Contact Information
Point of Contact
NOAA Office for Coastal Management (NOAA/OCM)
coastal.info@noaa.gov
(843) 740-1202
https://coast.noaa.gov
Metadata Contact
NOAA Office for Coastal Management (NOAA/OCM)
coastal.info@noaa.gov
(843) 740-1202
https://coast.noaa.gov
Extents
2014-10-02 - 2014-10-05
Item Identification
Title: | 2014 USACE NWP Topobathy Lidar: Coos Bay (OR) |
---|---|
Short Name: | or2014_usace_nwp_coosbay_m4905_metadata |
Status: | Completed |
Publication Date: | 2015-08-14 |
Abstract: |
These data were collected on behalf of the USACE, Northwest Division, Portland District (NWP) in the area of Coos Bay, Oregon. These files contain classified topo/bathy lidar data. Data are classified as 1 (valid non-ground topographic data), 2 (valid ground topographic data), and 29 (valid bathymetric data). Classes 1 and 2 are defined in accordance with the American Society for Photogrammetry and Remote Sensing (ASPRS) classification standards. These data were collected by the Coastal Zone Mapping and Imaging Lidar (CZMIL) system. CZMIL integrates a lidar sensor with simultaneous topographic and bathymetric capabilities, a digital camera and a hyperspectral imagery on a single remote sensing platform for use in coastal mapping and charting activities. Native lidar data is not generally in a format accessible to most Geographic Information Systems (GIS). Specialized in-house and commercial software packages are used to process the native lidar data into 3-dimensional positions that can be imported into GIS software for visualization and further analysis. Horizontal positions, are in decimal degrees of latitude and longitude, referenced to the North American Datum of 1983 National Adjustment of 2011. Vertical positions were collected to the NAD83(2011) ellipsoid and in meters. The National Geodetic Survey's (NGS) GEOID12A model was used to transform the vertical positions from ellipsoid to orthometric heights referenced to the North American Vertical Datum of 1988 (NAVD88). The 3-D position data are sub-divided into a series of LAS files, which are tiled into quarter-quads or 5 km boxes. In addition to the lidar point data, Digital Elevation Models(DEMs), created from the lidar point data are also available. DEMs were created from all classes of points (1, 2, 29) at a 1 meter and 5 meter grid size and bare earth DEMs were created from the ground and bathymetric data classes (2, 29) at a 1 meter grid size. These products have not been reviewed by the NOAA Office for Coastal Management (OCM) and any conclusions drawn from the analysis of this information are not the responsibility of NOAA or OCM. The data are available upon request via email at: coastal.info@noaa.gov. Please provide the name of the data set and "DEM Request" in the subject line. Original contact information: Contact Org: JALBTCX Title: Data Production Manager Phone: 228-252-1131 Email: JALBTCX@usace.army.mil |
Purpose: |
These data were collected on behalf of the USACE, Northwest Division, Portland District (NWP) to depict the elevations above and below water in Coos Bay, OR. |
Notes: |
10585 |
Keywords
Theme Keywords
Thesaurus | Keyword |
---|---|
Global Change Master Directory (GCMD) Data Center Keywords |
DOD/USARMY/USACE/SAM/MOBILE/OPJ/JALBTCX > Joint Airborne Lidar Bathymetry Technical Center of Expertise, Mobile District, South Atlantic Division, U.S. Army Corps of Engineers, U.S. Army, U.S. Department of Defense
|
Global Change Master Directory (GCMD) Science Keywords |
EARTH SCIENCE > HUMAN DIMENSIONS > ENVIRONMENTAL GOVERNANCE/MANAGEMENT > LAND MANAGEMENT > LAND USE CLASSES
|
Global Change Master Directory (GCMD) Science Keywords |
EARTH SCIENCE > LAND SURFACE > GEOMORPHIC LANDFORMS/PROCESSES > COASTAL LANDFORMS
|
Global Change Master Directory (GCMD) Science Keywords |
EARTH SCIENCE > LAND SURFACE > GEOMORPHIC LANDFORMS/PROCESSES > COASTAL PROCESSES
|
Global Change Master Directory (GCMD) Science Keywords |
EARTH SCIENCE > LAND SURFACE > TOPOGRAPHY > TERRAIN ELEVATION
|
Global Change Master Directory (GCMD) Science Keywords |
EARTH SCIENCE > OCEANS > BATHYMETRY/SEAFLOOR TOPOGRAPHY > BATHYMETRY
|
Global Change Master Directory (GCMD) Science Keywords |
EARTH SCIENCE > OCEANS > BATHYMETRY/SEAFLOOR TOPOGRAPHY > SEAFLOOR TOPOGRAPHY
|
Global Change Master Directory (GCMD) Science Keywords |
EARTH SCIENCE > OCEANS > COASTAL PROCESSES > COASTAL ELEVATION
|
ISO 19115 Topic Category |
elevation
|
ISO 19115 Topic Category |
imageryBaseMapsEarthCover
|
ISO 19115 Topic Category |
oceans
|
UNCONTROLLED | |
GCMD Data Center Keywords v7 | Spatial Data Branch |
GCMD Data Center Keywords v7 | United States Army |
None | IWG-OCM |
None | National Coastal Mapping Program (NCMP) |
None | U.S. Army Corps of Engineers (USACE) |
Temporal Keywords
Thesaurus | Keyword |
---|---|
UNCONTROLLED | |
None | 2014 |
None | October |
Spatial Keywords
Thesaurus | Keyword |
---|---|
Global Change Master Directory (GCMD) Location Keywords |
VERTICAL LOCATION > LAND SURFACE
|
Global Change Master Directory (GCMD) Location Keywords |
VERTICAL LOCATION > SEA FLOOR
|
UNCONTROLLED | |
Geographic Names Information System | Coos Bay |
Geographic Names Information System | Coos County |
Geographic Names Information System | Oregon |
Geographic Names Information System | United States |
Instrument Keywords
Thesaurus | Keyword |
---|---|
Global Change Master Directory (GCMD) Instrument Keywords |
LIDAR > Light Detection and Ranging
|
Physical Location
Organization: | Office for Coastal Management |
---|---|
City: | Charleston |
State/Province: | SC |
Data Set Information
Data Set Scope Code: | Data Set |
---|---|
Maintenance Frequency: | As Needed |
Distribution Liability: |
These data have been developed from the best available sources. Although efforts have been made to ensure that the data are accurate and reliable, errors and variable conditions originating from physical sources used to develop the data may be reflected in the data supplied. Users must be aware of these conditions and bear responsibility for the appropriate use of the information with respect to possible errors, scale, resolution, rectification, positional accuracy, development methodology, time period, environmental and climatic conditions and other circumstances specific to these data. The user is responsible for understanding the accuracy limitations of the data provided herein. The burden for determining fitness for use lies entirely with the user. The user should refer to the accompanying metadata notes for a description of the data and data development procedures. Any conclusions drawn from the analysis of this information are not the responsibility of USACE, JALBTCX, NOAA, the Office for Coastal Management or its partners. |
Data Set Credit: | Acknowledgment of the Joint Airborne Lidar Bathymetry Technical Center of eXpertise (JALBTCX) would be appreciated in any publications or derived products. |
Support Roles
Data Steward
Date Effective From: | 2015-08-14 |
---|---|
Date Effective To: | |
Contact (Organization): | NOAA Office for Coastal Management (NOAA/OCM) |
Address: |
2234 South Hobson Ave Charleston, SC 29405-2413 |
Email Address: | coastal.info@noaa.gov |
Phone: | (843) 740-1202 |
URL: | https://coast.noaa.gov |
Distributor
Date Effective From: | 2015-08-14 |
---|---|
Date Effective To: | |
Contact (Organization): | NOAA Office for Coastal Management (NOAA/OCM) |
Address: |
2234 South Hobson Ave Charleston, SC 29405-2413 |
Email Address: | coastal.info@noaa.gov |
Phone: | (843) 740-1202 |
URL: | https://coast.noaa.gov |
Metadata Contact
Date Effective From: | 2015-08-14 |
---|---|
Date Effective To: | |
Contact (Organization): | NOAA Office for Coastal Management (NOAA/OCM) |
Address: |
2234 South Hobson Ave Charleston, SC 29405-2413 |
Email Address: | coastal.info@noaa.gov |
Phone: | (843) 740-1202 |
URL: | https://coast.noaa.gov |
Point of Contact
Date Effective From: | 2015-08-14 |
---|---|
Date Effective To: | |
Contact (Organization): | NOAA Office for Coastal Management (NOAA/OCM) |
Address: |
2234 South Hobson Ave Charleston, SC 29405-2413 |
Email Address: | coastal.info@noaa.gov |
Phone: | (843) 740-1202 |
URL: | https://coast.noaa.gov |
Extents
Currentness Reference: | Ground Condition |
---|
Extent Group 1
Extent Group 1 / Time Frame 1
Time Frame Type: | Range |
---|---|
Start: | 2014-10-02 |
End: | 2014-10-05 |
Access Information
Security Class: | Unclassified |
---|---|
Data Access Procedure: |
This data can be obtained on-line at the following URL: https://coast.noaa.gov/dataviewer/#/lidar/search/where:ID=4905 The data set is dynamically generated based on user-specified parameters.; |
Data Access Constraints: |
None. These data have been developed from the best available sources. Although efforts have been made to ensure that the data are accurate and reliable, errors and variable conditions originating from physical sources used to develop the data may be reflected in the data supplied. Users must be aware of these conditions and bear responsibility for the appropriate use of the information with respect to possible errors, scale, resolution, rectification, positional accuracy, development methodology, time period, environmental and climatic conditions and other circumstances specific to these data. The user is responsible for understanding the accuracy limitations of the data provided herein. The burden for determining fitness for use lies entirely with the user. The user should refer to the accompanying metadata notes for a description of the data and data development procedures. |
Data Use Constraints: |
These data depict the heights at the time of the survey and are only accurate for that time. Acknowledgment of the Joint Airborne Lidar Bathymetry Technical Center of eXpertise (JALBTCX) would be appreciated in any publications or derived products. The data herein, including but not limited to geographic data, tabular data, analytical data, electronic data structures or files, are provided "as is" without warranty of any kind, either expressed or implied, or statutory, including, but not limited to, the implied warranties or merchantability and fitness for a particular purpose. The entire risk as to the quality and performance of the data is assumed by the user. No guarantee of accuracy is granted, nor is any responsibility for reliance thereon assumed. In no event shall the U.S. Army Corps of Engineers, Mobile District Office, Spatial Data Branch be liable for direct, indirect, incidental, consequential or special damages of any kind, including, but not limited to, loss of anticipated profits or benefits arising out of use of or reliance on the data. The Spatial Data Branch does not accept liability for any damages or misrepresentation caused by inaccuracies in the data or as a result of changes to the data caused by system transfers or other transformations or conversions, nor is there responsibility assumed to maintain the data in any manner or form. Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations. |
Distribution Information
Distribution 1
Download URL: | https://coast.noaa.gov/dataviewer/#/lidar/search/where:ID=4905 |
---|---|
Distributor: | |
File Name: | Customized Download |
Description: |
Create custom data files by choosing data area, product type, map projection, file format, datum, etc. |
Distribution 2
Download URL: | https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/4905/index.html |
---|---|
Distributor: | |
File Name: | Bulk Download |
Description: |
Simple download of data files. |
URLs
URL 1
URL: | https://coast.noaa.gov/dataviewer |
---|---|
URL Type: |
Online Resource
|
URL 2
URL: | https://coast.noaa.gov/ |
---|---|
URL Type: |
Online Resource
|
URL 3
URL: | https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/4905/supplemental/or2014_usace_nwp_coosbay_m4905.kmz |
---|---|
Name: | Browse Graphic |
URL Type: |
Browse Graphic
|
File Resource Format: | kmz |
Description: |
This graphic shows the lidar footprint for the 2014 USACE NWP topobathy lidar project in Coos Bay, Oregon. |
Activity Log
Activity Log 1
Activity Date/Time: | 2016-09-13 |
---|---|
Description: |
Date that the source FGDC record was last modified. |
Activity Log 2
Activity Date/Time: | 2017-11-14 |
---|---|
Description: |
Converted from FGDC Content Standard for Digital Geospatial Metadata (version FGDC-STD-001-1998) using 'fgdc_to_inport_xml.pl' script. Contact Tyler Christensen (NOS) for details. |
Activity Log 3
Activity Date/Time: | 2018-02-08 |
---|---|
Description: |
Partial upload of Positional Accuracy fields only. |
Activity Log 4
Activity Date/Time: | 2018-03-13 |
---|---|
Description: |
Partial upload to move data access links to Distribution Info. |
Technical Environment
Description: |
Microsoft Windows 7 Version 6.1 (Build 7601) Service Pack 1; Esri ArcGIS 10.1.0.3035 |
---|
Data Quality
Accuracy: |
These data are not attributed. | Quantitative Value: None | Quantitative Test Explanation: These data are not attributed. |
---|---|
Horizontal Positional Accuracy: |
The data positions were obtained using post processed KGPS methods. The horizontal accuracy of CZMIL in the joint topo/bathy mode of operation is +/- 1 m, 2 sigma.; Quantitative Value: 1.0 meters, Test that produced the value: +/- 1 m, 2 sigma |
Vertical Positional Accuracy: |
Topo data - 19.6 cm @ 95% confidence level (10 cm RMSE). Bathy shallow FOV data - SQRT((0.25^2)+((0.0075d)^2)) meters at @ 95% confidence level. Bathy deep FOV data - SQRT((0.30^2)+((0.013d)^2)) meters @ 95% confidence level (d is depth).; Quantitative Value: 0.10 meters, Test that produced the value: +/- 10 cm RMSE |
Completeness Report: |
This data set covers the spatial extent of topographic lidar data obtained during this survey. |
Conceptual Consistency: |
During inspection and QC of the lidar point cloud, flightline to flightline elevation differences met the CZMIL sensor specifications. |
Lineage
Process Steps
Process Step 1
Description: |
These data were collected using the CZMIL system. It is owned and operated by the U.S. Army Corps of Engineers (USACE). The system collects topobathy lidar data at 10 kHz and RGB imagery at 2 Hz. A CASI-1500 hyperspectral line scanner is integrated with the system as well. Aircraft position, velocity and acceleration information are collected through a combination of Novatel and POS A/V 510 equipment. All raw data streams are transferred to the office for downloading and processing in CZMIL's Hydro Fusion software. Aircraft position data are processed using POSPac software and the results are combined with the lidar data to produce 3-D positions for each lidar shot. Upon inspection and QA/QC in the software packages Fledermaus and PFM_ABE, anomalous data are flagged as invalid and have the withheld bit set. PFM_ABE software then converts all valid data from ellipsoid to orthometric heights based on the NGS' GEOID12A model and exports valid lidar data as a series of unclassified LAS files. |
---|---|
Process Date/Time: | 2014-10-02 00:00:00 |
Process Step 2
Description: |
LAS files are imported into GeoCue V2012.1.27.7, which is a geospatial workflow production and management software tool employed by JALBTCX to perform and monitor production of data products. Upon import into GeoCue, a customized classification macro, built upon the TerraScan V13 module within Microstation V8i, classifies valid topobathy data as ground points (2) and unclassified points (1), and valid bathymetric points (29). Upon completion the macro, the classification results undergo quality control and any misclassified points are manually edited. In areas of dense vegetation the bare earth ground points might be incorrectly classified due to the inability of the laser to penetrate the canopy and reach the bare ground. In these areas, JALBTCX defaults to the algorithm's "ground" surface instead of manually reclassifying those points. They are partitioned into a series of 5km or quarter quad delivery boxes, one Classified LAS file per box. The format of the file is LAS version 1.2. Data are classified as 1 (valid non-ground topographic data), 2 (valid ground topographic data), and 29 (valid bathymetric data). |
---|---|
Process Date/Time: | 2015-07-02 00:00:00 |
Process Step 3
Description: |
The NOAA Office for Coastal Management (OCM) received the files in las format from JALBTCX. The files contained lidar elevation and intensity measurements. The data were in geographic coordinates and orthometric heights in meters. OCM performed the following processing for data storage and Digital Coast provisioning purposes: 1. LAS files were compressed to laz format using laszip. 2. Data were checked for elevation outliers. 3. Data were converted from orthometric heights to NAD83(2011) ellipsoid heights using GEOID12A. |
---|---|
Process Date/Time: | 2015-08-04 00:00:00 |
Catalog Details
Catalog Item ID: | 49941 |
---|---|
GUID: | gov.noaa.nmfs.inport:49941 |
Metadata Record Created By: | Anne Ball |
Metadata Record Created: | 2017-11-15 15:23+0000 |
Metadata Record Last Modified By: | SysAdmin InPortAdmin |
Metadata Record Last Modified: | 2022-08-09 17:11+0000 |
Metadata Record Published: | 2022-03-16 |
Owner Org: | OCMP |
Metadata Publication Status: | Published Externally |
Do Not Publish?: | N |
Metadata Last Review Date: | 2022-03-16 |
Metadata Review Frequency: | 1 Year |
Metadata Next Review Date: | 2023-03-16 |