2009 SCDNR Charleston County Lidar
Data Set (DS) | OCM Partners (OCMP)GUID: gov.noaa.nmfs.inport:49978 | Updated: August 9, 2022 | Published / External
Item Identification
Title: | 2009 SCDNR Charleston County Lidar |
---|---|
Short Name: | sc2009_scdnr_charleston_m3653_metadata |
Status: | Completed |
Publication Date: | 2014-06 |
Abstract: |
Photoscience completed the original collection and classification of the multiple return LiDAR of Charleston County, South Carolina in the winter of 2006-2007. In 2009, Sanborn collected portions of Charleston County which were previously uncollected in 2006/7. In 2013, Dewberry was tasked with reviewing, updating and merging the original LiDAR products into one continuous data to include the 2006-2007 and 2009 separate projects. The 2006/2007 data was separated from the 2009 collected points in order to keep the 2 missions separate (collection dates, standards, data qualities, etc). The 2006-2007 data was removed by analyzing GPS time stamps of the LAS points in order to differentiate by collection year. The resulting LAS files left only the 2009 points which represent this project. The 2007 data already exists at OCM as part of a previous delivery. The nominal point spacing for this project is 1.4 meters. Dewberry used proprietary procedures to update and reclassify the LAS according to updated project specifications: 1-Unclassified, 2-Ground, 7-Noise, 8- Model Key Points, 9-Water, 10-Ignored Ground, 13- Points removed from bridges and culverts. |
Purpose: |
The purpose of this LiDAR data was to produce high accuracy 3D elevation products, including tiled LiDAR in LAS 1.2 format, 3D breaklines, and ESRI grid raster format 10 ft cell size hydro flattened Digital Elevation Models (DEMs). |
Notes: |
10622 |
Supplemental Information: |
A footprint of this data set may be viewed in Google Earth at: https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/3653/supplemental/sc2009_scdnr_charleston_m3653.kmz . A report documenting project notes is available at: https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/3653/supplemental/sc2009_scdnr_charleston_lidarreport_m3653.pdf . |
Keywords
Theme Keywords
Thesaurus | Keyword |
---|---|
ISO 19115 Topic Category |
elevation
|
UNCONTROLLED | |
None | Bare earth |
Physical Location
Organization: | Office for Coastal Management |
---|---|
City: | Charleston |
State/Province: | SC |
Data Set Information
Data Set Scope Code: | Data Set |
---|---|
Maintenance Note: |
As needed - Dewberry 2013-2014 (reprocessed, did not recollect data) |
Data Presentation Form: | LAS |
Entity Attribute Overview: |
LiDAR points in LAS 1.2 format |
Entity Attribute Detail Citation: |
none |
Distribution Liability: |
Any conclusions drawn from the analysis of this information are not the responsibility of Sanborn, PhotoScience Inc, Dewberry, SCDNR, NOAA, the Office for Coastal Management or its partners. |
Support Roles
Data Steward
Date Effective From: | 2014-06 |
---|---|
Date Effective To: | |
Contact (Organization): | NOAA Office for Coastal Management (NOAA/OCM) |
Address: |
2234 South Hobson Ave Charleston, SC 29405-2413 |
Email Address: | coastal.info@noaa.gov |
Phone: | (843) 740-1202 |
URL: | https://coast.noaa.gov |
Distributor
Date Effective From: | 2014-06 |
---|---|
Date Effective To: | |
Contact (Organization): | NOAA Office for Coastal Management (NOAA/OCM) |
Address: |
2234 South Hobson Ave Charleston, SC 29405-2413 |
Email Address: | coastal.info@noaa.gov |
Phone: | (843) 740-1202 |
URL: | https://coast.noaa.gov |
Metadata Contact
Date Effective From: | 2014-06 |
---|---|
Date Effective To: | |
Contact (Organization): | NOAA Office for Coastal Management (NOAA/OCM) |
Address: |
2234 South Hobson Ave Charleston, SC 29405-2413 |
Email Address: | coastal.info@noaa.gov |
Phone: | (843) 740-1202 |
URL: | https://coast.noaa.gov |
Point of Contact
Date Effective From: | 2014-06 |
---|---|
Date Effective To: | |
Contact (Organization): | NOAA Office for Coastal Management (NOAA/OCM) |
Address: |
2234 South Hobson Ave Charleston, SC 29405-2413 |
Email Address: | coastal.info@noaa.gov |
Phone: | (843) 740-1202 |
URL: | https://coast.noaa.gov |
Extents
Currentness Reference: | Ground Condition |
---|
Extent Group 1
Extent Group 1 / Geographic Area 1
W° Bound: | -80.373467 | |
---|---|---|
E° Bound: | -79.433067 | |
N° Bound: | 33.516439 | |
S° Bound: | 32.809321 |
Extent Group 1 / Time Frame 1
Time Frame Type: | Discrete |
---|---|
Start: | 2009 |
Spatial Information
Spatial Representation
Representations Used
Vector: | Yes |
---|
Access Information
Security Class: | Unclassified |
---|---|
Data Access Procedure: |
This data can be obtained on-line at the following URL: https://coast.noaa.gov/dataviewer/#/lidar/search/where:ID=3653 The data set is dynamically generated based on user-specified parameters.; |
Data Access Constraints: |
none |
Data Use Constraints: |
Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations. These data depict the heights at the time of the survey and are only accurate for that time. |
Distribution Information
Distribution 1
Download URL: | https://coast.noaa.gov/dataviewer/#/lidar/search/where:ID=3653 |
---|---|
Distributor: | |
File Name: | Customized Download |
Description: |
Create custom data files by choosing data area, product type, map projection, file format, datum, etc. |
Distribution 2
Download URL: | https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/3653/index.html |
---|---|
Distributor: | |
File Name: | Bulk Download |
Description: |
Simple download of data files. |
URLs
URL 1
URL: | https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/3653/supplemental/sc2009_scdnr_charleston_m3653.kmz |
---|---|
Name: | Browse Graphic |
URL Type: |
Browse Graphic
|
File Resource Format: | KMZ |
Description: |
This graphic shows the lidar coverage for the 2009 SCDNR collection of Charleston county in South Carolina. Delivered with the Charleston 2006 data as one mission. |
URL 2
URL: | https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/3653/supplemental/sc2009_scdnr_charleston_lidarreport_m3653.pdf |
---|---|
Name: | project report |
URL Type: |
Online Resource
|
File Resource Format: | |
Description: |
A report documenting project notes. |
Activity Log
Activity Log 1
Activity Date/Time: | 2016-05-23 |
---|---|
Description: |
Date that the source FGDC record was last modified. |
Activity Log 2
Activity Date/Time: | 2017-11-14 |
---|---|
Description: |
Converted from FGDC Content Standards for Digital Geospatial Metadata (version FGDC-STD-001-1998) using 'fgdc_to_inport_xml.pl' script. Contact Tyler Christensen (NOS) for details. |
Activity Log 3
Activity Date/Time: | 2018-02-08 |
---|---|
Description: |
Partial upload of Positional Accuracy fields only. |
Activity Log 4
Activity Date/Time: | 2018-03-13 |
---|---|
Description: |
Partial upload to move data access links to Distribution Info. |
Technical Environment
Description: |
Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 3; ESRI ArcCatalog 10.0 |
---|
Data Quality
Horizontal Positional Accuracy: |
Lidar source compiled to meet 1 meter horizontal accuracy.; Quantitative Value: 1.0 meters, Test that produced the value: Dewberry does not perform independent horizontal accuracy testing on the LiDAR. LiDAR vendors perform calibrations on the LiDAR sensor and compare data to adjoining flight lines to ensure LiDAR meets the 1 meter horizontal accuracy standard at the 95% confidence level. |
---|---|
Vertical Positional Accuracy: |
The vertical accuracy of the original LiDAR was tested by Dewberry in 2012 (or whenever we performed the original QAQC). Vertical Accuracy was not re-tested post updates performed in 2014. The vertical accuracy of the of the full LiDAR project was tested by Dewberry with independent survey checkpoints. The survey checkpoints were evenly distributed throughout the project area and are located in areas of bare earth and open terrain, high grass, pavement, brush and low trees, and forest. The vertical accuracy is tested by comparing survey checkpoints to a triangulated irregular network (TIN) that is created from the LiDAR ground points. Checkpoints are always compared to interpolated surfaces created from the LiDAR point cloud because it is unlikely that a survey checkpoint will be located at the location of a discrete LiDAR point. Checkpoints in open terrain were used to compute the Fundamental Vertical Accuracy (FVA). Project specifications required a FVA of 0.80 ft (24.5 cm) based on a RMSEz (0.41 ft/12.5 cm) x 1.9600. All checkpoints were used to compute the Consolidated Vertical Accuracy (CVA). Project specifications required a CVA of 1.19 ft (36.3 cm) based on the 95th percentile.; Quantitative Value: 0.185 meters, Test that produced the value: Calculated FVA to 0.61 ft (18.5 cm). Based on the vertical accuracy testing conducted by Dewberry, using NSSDA and FEMA methodology, vertical accuracy at the 95% confidence level (called Accuracyz) is computed by the formula RMSEz x 1.9600 (Charleston County had a RMSEz of 9.25 cm+). The dataset for the Charleston County, SC LiDAR project satisfies the criteria: Lidar dataset tested 0.49 ft vertical accuracy at 95% confidence level in open terrain, based on RMSEz (0.33 ft) x 1.9600. |
Completeness Report: |
A visual qualitative assessment was performed to ensure data completeness and bare earth data cleanliness. No void or missing data and data passes vertical accuracy specifications. |
Conceptual Consistency: |
Data covers the tile scheme provided for the project area. |
Lineage
Process Steps
Process Step 1
Description: |
JASPER COUNTY: Utilizing Photo Science's two ALS-50 LiDAR sensors, data was collected to cover Jasper County, South Carolina. Data was collected in a total of 111 flightlines at a pulse rate of 75,000 points per second. COLLETON COUNTY: Utilizing Photo Science's two ALS-50 LiDAR sensors, data was collected to cover Colleton County, South Carolina. Data was collected in a total of 160 flightlines at a pulse rate of 75,000 points per second. CHARLESTON COUNTY: Utilizing Photo Science's two ALS-50 LiDAR sensors, data was collected to cover Charleston County, South Carolina. Data was collected in a total of 77 flightlines at a pulse rate of 75,000 points per second. Originally collected from 20061227 through 20070323. |
---|---|
Process Date/Time: | 2007-03-23 00:00:00 |
Process Step 2
Description: |
Raw LiDAR data (collected as Process Step 1) was processed to create a bare ground surface. Process included calibration of LiDAR data to remove systematic errors (utilizing Leica's ALS Processor software), adjustment of elevation data to control positions (utilizing TerraScan software for control comparisons and adjustments), and both automatic and manual editing to correctly classify ground and non-ground data (utilizing TerraScan and TerraModeler software). In addition, QC steps were performed before and after processing. QC steps included line-to-line vertical comparisons and coverage checks, and were performed with TerraScan and GeoCue software. |
---|---|
Process Date/Time: | 2007-10-30 00:00:00 |
Process Step 3
Description: |
The ABGPS, IMU, and raw Leica ALS-50 LiDAR data are integrated into the LEICA ALS post processor software. The resultant file is in a LAS binary file format. The LAS file version 1.2 formats can be easily transferred from one file format to another. It is a binary file format that maintains information specific to the LiDAR data (return#, intensity value, xyz, etc.). The resultant points are produced in the geodetic coordinates referenced to the NAD83 horizontal datum and GRS80 vertical datum. The date and time for each flight line can be determined using the Julian date and time. |
---|---|
Process Date/Time: | 2009-01-01 00:00:00 |
Process Step 4
Description: |
The unedited data are classified to facilitate the application of the appropriate feature extraction filters. A combination of proprietary filters is applied as appropriate for the production of bare earth digital terrain models (DTMs). Interactive editing methods are applied to those areas where it is inappropriate or impossible to use the feature extraction filters, based upon the design criteria and/or limitations of the relevant filters. These same feature extraction filters are used to produce elevation height surfaces. The LiDAR mass points were delivered in American Society for Photogrammetry and Remote Sensing LAS 1.2 format. The header file for each dataset is complete as define by the LAS 1.2 specification. In addition the following fields are included: Flight Date Julian, Year, and Class. The LAS files do not include overlap. The data was classified as follows: 1-Unclassified, 2-Ground, 7-Noise,8- Model Key Points, 9-Water, 10-Ignored Ground, 13- Points removed from bridges and culverts. |
---|---|
Process Date/Time: | 2009-01-01 00:00:00 |
Process Step 5
Description: |
Conversion from Geodetic coordinates NAD83 into State Plane coordinates (International Feet) NAD83 and conversion from ellipsoid heights (meters) into orthometric heights (U.S. Survey Feet). |
---|---|
Process Date/Time: | 2009-01-01 00:00:00 |
Process Step 6
Description: |
Dewberry updated the horizontal datum for the 2009 data from NAD83 to NAD83 (NSRS2007) and the vertical datum from NAVD88 (Geoid03) to NAVD88 (Geoid09). The projection and all units remain the same. Additionally, Dewberry updated the precision of the lidar data from 2 decimal places to 3 decimal places. Dewberry also reviewed the LiDAR data and removed gross artifacts and anomalies by re-classifying the LiDAR points to more appropriate classes. |
---|---|
Process Date/Time: | 2014-01-01 00:00:00 |
Process Step 7
Description: |
The NOAA Office for Coastal Management (OCM) received the files in laz format via hard drive from Dewberry. The data arrived referenced to the South Carolina State Plane (3900) and vertical reference to NAVD88 elevation in feet: 1. The data were converted from projected orthometric coordinates to geographic coordinates. 2. Vertical values were converted from NAVD88 to ellipsoidal values using Geoid09. 3. The 2006/2007 data was separated from the 2009 collected points in order to keep the 2 missions separate (collection dates, standards, data qualities, etc). The 2007 data was removed by analyzing time stamps for each point in the LAS files in order to differentiate collection year. The resulting LAS files showed only the 2009 points. The 2007 data already exists at OCM as part of a previous delivery. 4. The LAS data were stored as compressed LAZ data. |
---|---|
Process Date/Time: | 2014-06-02 00:00:00 |
Catalog Details
Catalog Item ID: | 49978 |
---|---|
GUID: | gov.noaa.nmfs.inport:49978 |
Metadata Record Created By: | Anne Ball |
Metadata Record Created: | 2017-11-15 15:23+0000 |
Metadata Record Last Modified By: | SysAdmin InPortAdmin |
Metadata Record Last Modified: | 2022-08-09 17:11+0000 |
Metadata Record Published: | 2022-03-16 |
Owner Org: | OCMP |
Metadata Publication Status: | Published Externally |
Do Not Publish?: | N |
Metadata Last Review Date: | 2022-03-16 |
Metadata Review Frequency: | 1 Year |
Metadata Next Review Date: | 2023-03-16 |