Data Management Plan
GUID: gov.noaa.nmfs.inport:50028 | Published / External
Data Management Plan
DMP Template v2.0.1 (2015-01-01)Please provide the following information, and submit to the NOAA DM Plan Repository.
Reference to Master DM Plan (if applicable)
As stated in Section IV, Requirement 1.3, DM Plans may be hierarchical. If this DM Plan inherits provisions from a higher-level DM Plan already submitted to the Repository, then this more-specific Plan only needs to provide information that differs from what was provided in the Master DM Plan.
1. General Description of Data to be Managed
The Light Detection and Ranging (LiDAR) LAS dataset is a survey of select areas within Rutland Ranch. This data falls in Manatee
County. These data were produced for the Southwest Florida Water Management District (SWFWMD). The Rutland Ranch LiDAR Survey project
area consists of approximately 17 square miles. The LiDAR point cloud was flown at a density sufficient to support a maximum final post
spacing of 4 feet for unobscured areas. 3001 Inc. acquired 40 flightlines on February 1, 2006. The data was divided into 5000' by 5000'
foot cells that serve as the tiling scheme. The Rutland Ranch LiDAR Survey was collected under the guidance of a Professional Mapper/
Original contact information:
Contact Org: Southwest Florida Water Management District
Notes: Only a maximum of 4000 characters will be included.
Notes: Data collection is considered ongoing if a time frame of type "Continuous" exists.
Notes: All time frames from all extent groups are included.
Notes: All geographic areas from all extent groups are included.
(e.g., digital numeric data, imagery, photographs, video, audio, database, tabular data, etc.)
(e.g., satellite, airplane, unmanned aerial system, radar, weather station, moored buoy, research vessel, autonomous underwater vehicle, animal tagging, manual surveys, enforcement activities, numerical model, etc.)
2. Point of Contact for this Data Management Plan (author or maintainer)
Notes: The name of the Person of the most recent Support Role of type "Metadata Contact" is used. The support role must be in effect.
Notes: The name of the Organization of the most recent Support Role of type "Metadata Contact" is used. This field is required if applicable.
3. Responsible Party for Data Management
Program Managers, or their designee, shall be responsible for assuring the proper management of the data produced by their Program. Please indicate the responsible party below.
Notes: The name of the Person of the most recent Support Role of type "Data Steward" is used. The support role must be in effect.
Programs must identify resources within their own budget for managing the data they produce.
5. Data Lineage and Quality
NOAA has issued Information Quality Guidelines for ensuring and maximizing the quality, objectivity, utility, and integrity of information which it disseminates.
(describe or provide URL of description):
- 2006-02-01 00:00:00 - The ABGPS, inertial measurement unit (IMU), and raw scans are collected during the LiDAR aerial survey. The ABGPS monitors the xyz position of the sensor and the IMU monitors the orientation. During the aerial survey laser pulses reflected from features on the ground surface are detected by the receiver optics and collected by the data logger. GPS locations are based on data collected by receivers on the aircraft and base stations on the ground. The ground base stations are placed no more than 35 km radius from the flight survey area.
- 2006-07-12 00:00:00 - The ABGPS, IMU, and raw scans are integrated using proprietary software developed by the Leica Geosystems and delivered with the Leica ALS50 System. The resultant file is in a LAS binary file format. The LAS file version 1.0 format can be easily transferred from one file format to another. It is a binary file format that maintains information specific to the LiDAR data (return#, intensity value, xyz, etc.). The resultant points are produced in the State Plane Florida West (FIPS 0902) coordinate system, with units in feet and referenced to the NAD83 horizontal datum and NAVD88 vertical datum.
- 2006-07-19 00:00:00 - The unedited data are classified to facilitate the application of the appropriate feature extraction filters. A combination of proprietary filters are applied as appropriate for the production of bare earth digital terrain models (DTMs). Interactive editing methods are applied to those areas where it is inappropriate or impossible to use the feature extraction filters, based upon the design criteria and/or limitations of the relevant filters. These same feature extraction filters are used to produce elevation height surfaces.
- 2006-07-24 00:00:00 - Filtered and edited data are subjected to rigorous QA/QC according to the 3001 Inc. Quality Control Plan and procedures. Very briefly, a series of quantitative and visual procedures are employed to validate the accuracy and consistency of the filtered and edited data. Ground control is established by 3001, Inc. and GPS-derived ground control points (GCPs) points in various areas of dominant and prescribed land cover. These points are coded according to land cover, surface material and ground control suitability. A suitable number of points are selected for calculation of a statistically significant accuracy assessment as per the requirements of the National Standard for Spatial Data Accuracy. A spatial proximity analysis is used to select edited LiDAR data points within a specified distance of the relevant GCPs. A search radius decision rule is applied with consideration of terrain complexity, cumulative error and adequate sample size. Accuracy validation and evaluation is accomplished using proprietary software to apply relevant statistical routines for calculation of Root Mean Square Error (RMSE) and the National Standard for Spatial Data Accuracy (NSSDA) according to Federal Geographic Data Committee (FGDC) specifications. Processing occurred 20060724 - 20060831.
- 2006-09-04 00:00:00 - The LiDAR mass points were delivered in American Society for Photogrammetry and Remote Sensing LAS 1.0 format. The header file for each dataset is complete as define by the LAS 1.0 specification. In addition the following fields are included: Flight Date Julian, Year, and Class. The LAS files do not include overlap. The data was classified as follows: Class 1 = Unclassified. This class includes vegetation, buildings, noise etc. Class 2 = Ground Class 9 = Water The datasets were delivered in the Districts standard 5000' by 5000' tiling scheme. The tiles are contiguous and do not overlap. The tiles are suitable for seamless topographic data mosaics that include no "no data" areas. The names of the tiles are left padded with zeros as required to achieve a five character length and all files utilize the LAS file extension.
- 2008-01-25 00:00:00 - The NOAA Office for Coastal Management (OCM) received the files in LAS format. The files contained Lidar elevation measurements. The data was in Florida State Plane Projection and NAVD88 vertical datum. OCM performed the following processing to the data to make it available within the LDART Retrieval Tool (LDART): 1. The data were converted from Florida State Plane West coordinates to geographic coordinates. 2. The data were converted from NAVD88 (orthometric) heights to GRS80 (ellipsoid) heights using Geoid 99. 3. The LAS data were sorted by latitude and the headers were updated.
(describe or provide URL of description):
6. Data Documentation
The EDMC Data Documentation Procedural Directive requires that NOAA data be well documented, specifies the use of ISO 19115 and related standards for documentation of new data, and provides links to resources and tools for metadata creation and validation.
- 1.6. Type(s) of data
- 1.7. Data collection method(s)
- 3.1. Responsible Party for Data Management
- 4.1. Have resources for management of these data been identified?
- 4.2. Approximate percentage of the budget for these data devoted to data management
- 5.2. Quality control procedures employed
- 7.1. Do these data comply with the Data Access directive?
- 7.1.1. If data are not available or has limitations, has a Waiver been filed?
- 7.1.2. If there are limitations to data access, describe how data are protected
- 7.4. Approximate delay between data collection and dissemination
- 8.1. Actual or planned long-term data archive location
- 8.3. Approximate delay between data collection and submission to an archive facility
- 8.4. How will the data be protected from accidental or malicious modification or deletion prior to receipt by the archive?
(describe or provide URL of description):
7. Data Access
NAO 212-15 states that access to environmental data may only be restricted when distribution is explicitly limited by law, regulation, policy (such as those applicable to personally identifiable information or protected critical infrastructure information or proprietary trade information) or by security requirements. The EDMC Data Access Procedural Directive contains specific guidance, recommends the use of open-standard, interoperable, non-proprietary web services, provides information about resources and tools to enable data access, and includes a Waiver to be submitted to justify any approach other than full, unrestricted public access.
Notes: The name of the Organization of the most recent Support Role of type "Distributor" is used. The support role must be in effect. This information is not required if an approved access waiver exists for this data.
Notes: This field is required if a Distributor has not been specified.
Notes: All URLs listed in the Distribution Info section will be included. This field is required if applicable.
This data can be obtained on-line at the following URL: https://coast.noaa.gov/dataviewer;
Notes: This field is required if applicable.
8. Data Preservation and Protection
The NOAA Procedure for Scientific Records Appraisal and Archive Approval describes how to identify, appraise and decide what scientific records are to be preserved in a NOAA archive.
(Specify NCEI-MD, NCEI-CO, NCEI-NC, NCEI-MS, World Data Center (WDC) facility, Other, To Be Determined, Unable to Archive, or No Archiving Intended)
Notes: This field is required if archive location is World Data Center or Other.
Notes: This field is required if archive location is To Be Determined, Unable to Archive, or No Archiving Intended.
Notes: Physical Location Organization, City and State are required, or a Location Description is required.
Discuss data back-up, disaster recovery/contingency planning, and off-site data storage relevant to the data collection
9. Additional Line Office or Staff Office Questions
Line and Staff Offices may extend this template by inserting additional questions in this section.