Slide Menu
Search Help Show/Hide Menu
Short Citation:
OCM Partners, 2023: 2015 OLC Lidar: Chelan,

Item Identification

Title: 2015 OLC Lidar: Chelan
Short Name: wa2015_olc_chelan_m6334_metadata
Status: Completed
Publication Date: 2017-08-15

Quantum Spatial has collected Light Detection and Ranging (LiDAR) data for the Oregon LiDAR Consortium (OLC) Chelan FEMA study area. This study area is located in Chelan County, in central Washington. The collection of high resolution geographic data is part of an ongoing pursuit to amass a library of information accessible to government agencies as well as the general public. In July 2015 QSI employed remote-sensing lasers in order to obtain a total area flown of 215,029 acres. Settings for LiDAR data capture produced an average resolution of at least eight pulses per square meter.

Final products created include RGB extracted (from NAIP imagery) LiDAR point cloud data, one-meter digital elevation models of highest hit and bare earth ground models, one-meter density rasters, one-half-meter intensity rasters, study area vector shapes, and corresponding statistical data. Final deliverables are projected in UTM Zone 10. Lidar point clouds were projected back to geographic coordinates for storage in the Digital Coast Data Access Viewer.

Original contact information:

Contact Name: Jacob Edwards

Contact Org: DOGAMI

Phone: 971-673-1557



Provide high resolution terrain elevation data.



Supplemental Information:

A final report for this project may be viewed at:


Theme Keywords

Thesaurus Keyword
ISO 19115 Topic Category
None Bare earth
None Bare ground
None High-resolution
None Light Detection and Ranging

Physical Location

Organization: Office for Coastal Management
City: Charleston
State/Province: SC

Data Set Information

Data Set Scope Code: Data Set
Maintenance Frequency: None Planned
Distribution Liability:

Any conclusions drawn from the analysis of this information are not the responsibility of the Oregon Department of Geology and Mineral Industries (DOGAMI), FEMA, the Office for Coastal Management or its partners.

Data Set Credit: DOGAMI

Support Roles

Data Steward

CC ID: 693592
Date Effective From: 2017-08-15
Date Effective To:
Contact (Organization): NOAA Office for Coastal Management (NOAA/OCM)
Address: 2234 South Hobson Ave
Charleston, SC 29405-2413
Email Address:
Phone: (843) 740-1202


CC ID: 693594
Date Effective From: 2017-08-15
Date Effective To:
Contact (Organization): NOAA Office for Coastal Management (NOAA/OCM)
Address: 2234 South Hobson Ave
Charleston, SC 29405-2413
Email Address:
Phone: (843) 740-1202

Metadata Contact

CC ID: 693595
Date Effective From: 2017-08-15
Date Effective To:
Contact (Organization): NOAA Office for Coastal Management (NOAA/OCM)
Address: 2234 South Hobson Ave
Charleston, SC 29405-2413
Email Address:
Phone: (843) 740-1202

Point of Contact

CC ID: 693593
Date Effective From: 2017-08-15
Date Effective To:
Contact (Organization): NOAA Office for Coastal Management (NOAA/OCM)
Address: 2234 South Hobson Ave
Charleston, SC 29405-2413
Email Address:
Phone: (843) 740-1202


Currentness Reference: Ground Condition

Extent Group 1

Extent Group 1 / Geographic Area 1

CC ID: 1140020
W° Bound: -120.93071
E° Bound: -119.96768
N° Bound: 47.845208
S° Bound: 47.79256

Extent Group 1 / Time Frame 1

CC ID: 1140019
Time Frame Type: Range
Start: 2015-07-31
End: 2015-10-15

Spatial Information

Spatial Representation

Representations Used

Vector: Yes

Access Information

Security Class: Unclassified
Data Access Procedure:

This data can be obtained on-line at the following URL:


Data Access Constraints:


Data Use Constraints:

Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no

longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its


Distribution Information

Distribution 1

CC ID: 743515
Download URL:
File Name: Customized Download

Create custom data files by choosing data area, product type, map projection, file format, datum, etc.

Distribution 2

CC ID: 743516
Download URL:
File Name: Bulk Download

Simple download of data files.



CC ID: 743518
URL Type:
Online Resource


CC ID: 743519
URL Type:
Online Resource

Activity Log

Activity Log 1

CC ID: 693615
Activity Date/Time: 2017-08-05

Date that the source FGDC record was last modified.

Activity Log 2

CC ID: 693614
Activity Date/Time: 2017-11-14

Converted from FGDC Content Standards for Digital Geospatial Metadata (version FGDC-STD-001-1998) using '' script. Contact Tyler Christensen (NOS) for details.

Activity Log 3

CC ID: 718793
Activity Date/Time: 2018-02-08

Partial upload of Positional Accuracy fields only.

Activity Log 4

CC ID: 743517
Activity Date/Time: 2018-03-13

Partial upload to move data access links to Distribution Info.

Data Quality

Horizontal Positional Accuracy:


Vertical Positional Accuracy:

Vertical Accuracy reporting is designed to meet guidelines presented in the National Standard for Spatial Data Accuracy (NSSDA) (FGDC, 1998) and the ASPRS Guidelines for Vertical Accuracy Reporting for LiDAR Data V1.0 (ASPRS, 2004). The statistical model compares known ground survey points (GSPs) to the closest laser point. Vertical accuracy statistical analysis uses ground survey points in open areas where the LiDAR system has a "very high probability" that the sensor will measure the ground surface and reports the fundamental vertical accuracy value (FVA=1.96*RMSE).

For the OLC Chelan FEMA study area, a total of 2,230 GSPs were collected. An additional 123 reserved ground survey points were collected for independent verification, resulting in a fundamental vertical accuracy (FVA) of 0.038 meters.

For more information about the vertical accuracy, please refer to the final report, listed above in the Supplemental_Information field

of this metadata record.

; Quantitative Value: 0.038 meters, Test that produced the value: Tested to meet FVA at a 95 percent confidence level in meters.

Completeness Report:

LiDAR data has been collected and processed for all areas within the project study area.

Conceptual Consistency:

Upon receipt from vendor (Quantum Spatial), all LiDAR data was independently reviewed by staff from the Oregon Department of Geology and Mineral Industries (DOGAMI) to ensure project specifications were met. All data were inventoried for completeness and data were checked for quality, which included examining LiDAR data for errors associated with internal data consistency, model quality, and accuracy.


Process Steps

Process Step 1

CC ID: 1140016

The LiDAR survey occurred between July 31, 2015 and October 15, 1015 utilizing a Leica ALS80 mounted in a Cessna Grand Caravan. The systems were programmed to emit single pulses at around 369 kHz and flown at 1,500 m AGL, capturing a scan angle of 15 degrees from nadir. These settings were developed to yield points with an average native density of greater than eight pulses per square meter over terrestrial surfaces.

To solve for laser point position, an accurate description of aircraft position and attitude is vital. Aircraft position is described as x, y, and z and was measured twice per second (two hertz) by an onboard differential GPS unit. Aircraft attitude is described as pitch, roll, and yaw (heading) and was measured 200 times per second (200 hertz) from an onboard inertial measurement unit (IMU).

The LiDAR sensor operators constantly monitored the data collection settings during acquisition of the data, including pulse rate, power setting, scan rate, gain, field of view, and pulse mode. For each flight, the crew performed airborne calibration maneuvers designed to improve the calibration results during the data processing stage. They were also in constant communication with the ground crew to ensure proper ground GPS coverage for data quality. The LiDAR coverage was completed with no data gaps or voids, barring non-reflective surfaces (e.g., open water, wet asphalt). All necessary measures were taken to acquire data under good conditions (e.g., minimum cloud decks) and in a manner (e.g., adherence to flight plans) that prevented the possibility of data gaps. All QSI LiDAR systems are calibrated per the manufacturer and our own specifications, and tested by QSI for internal consistency for every mission using proprietary methods.

Process Date/Time: 2015-01-01 00:00:00

Process Step 2

CC ID: 1140017

The NOAA Office for Coastal Management (OCM) received the files in laz format. The files contained Lidar elevation and intensity measurements. The data were in UTM zone 10 (NAD83 2011 Epoch 2010.0), meters coordinates and NAVD88 (Geoid12a) vertical meters. OCM performed the following processing to the data to make it available within the Digital Coast:

1. The data were converted from UTM zone 10 coordinates to geographic coordinates.

2. The data were converted from NAVD88 (orthometric) heights to NAD83(2011) ellipsoid heights using Geoid12a grids.

The data was received without a metadata record. This record was produced based on the data quality report.

Process Date/Time: 2017-07-01 00:00:00

Catalog Details

Catalog Item ID: 50184
GUID: gov.noaa.nmfs.inport:50184
Metadata Record Created By: Anne Ball
Metadata Record Created: 2017-11-15 15:24+0000
Metadata Record Last Modified By: SysAdmin InPortAdmin
Metadata Record Last Modified: 2022-08-09 17:11+0000
Metadata Record Published: 2022-03-16
Owner Org: OCMP
Metadata Publication Status: Published Externally
Do Not Publish?: N
Metadata Last Review Date: 2022-03-16
Metadata Review Frequency: 1 Year
Metadata Next Review Date: 2023-03-16