NMFS W. Pacific Daily Longline Fishing Log - Hawaii - LOGHDR
Entity (ENT) | Pacific Islands Fisheries Science Center (PIFSC)GUID: gov.noaa.nmfs.inport:50941 | Updated: February 20, 2025 | Published / External
Item Identification
Title: | NMFS W. Pacific Daily Longline Fishing Log - Hawaii - LOGHDR |
---|---|
Short Name: | OPDT_LOGHDR |
Status: | Completed |
Abstract: |
Hawaii Longline Logbook Data |
Entity Information
Entity Type: | Data Table |
---|---|
Active Version?: | Yes |
Description: |
. |
Data Attributes
Attribute Summary
![]() |
![]() |
Name | Type | Description |
---|---|---|---|---|
100
|
DATASET | VARCHAR2 | Source ID code assigned by data entry staff (FC048). | |
100
|
VERSION | VARCHAR2 | Format version of the data assigned by data entry staff. | |
100
|
TRIPTYPE | VARCHAR2 | Trip type code (B)illfish, (T)una, (M)ixed. | |
100
|
TRIPNUM | VARCHAR2 | The logbook trip number as assigned by the logbook Data Manager after the trip has returned. A value is required. | |
100
|
RSCH_EXPMTL_CODE | CHAR | Is this trip a research or experimental trip? (R/X). | |
100
|
LANDYR | VARCHAR2 | Four-digit year that the boat returned to port. A value is required. | |
100
|
LANDMON | VARCHAR2 | Month (00-12) that the boat returned to port. | |
100
|
SETYR | VARCHAR2 | Four-digit year the set occurred. | |
100
|
SETMON | VARCHAR2 | Two-digit month the set was made. | |
100
|
SETDAY | VARCHAR2 | Two-digit day the set was made. | |
100
|
VESSELNAME | VARCHAR2 | Name of vessel. | |
100
|
PERMITNUM | VARCHAR2 | Permit number. | |
100
|
TARGET | VARCHAR2 | The code of the primary species of fish targeted to be caught on this trip, (T)una, (B)illfish, (M)ixed. | |
100
|
BAIT | VARCHAR2 | Code to represent what bait was used. | |
100
|
MAINLINE | VARCHAR2 | Length in miles of mainline used. Units for values are nautical miles. | |
100
|
HOOKSSET | VARCHAR2 | Number of hooks set. | |
100
|
MINHKSFLT | VARCHAR2 | Minimum number of hooks used per float. | |
100
|
MAXHKSFLT | VARCHAR2 | Maximum number of hooks used per float. | |
100
|
LIGHTSTICKS | VARCHAR2 | Number of light sticks used. | |
100
|
MINWINDSPD | VARCHAR2 | Minimum wind speed during the setting of hooks. Units for values are knots. | |
100
|
MAXWINDSPD | VARCHAR2 | Maximum wind speed during the setting of hooks. Units for values are knots. | |
100
|
WINDDIR | VARCHAR2 | Direction the wind was blowing during the setting of hooks. | |
100
|
MINWAVEHGT | VARCHAR2 | Minimum wave height during the setting of hooks. Units for values are feet. | |
100
|
MAXWAVEHGT | VARCHAR2 | Maximum wave height during the setting of hooks. Units for values are feet. | |
100
|
SURFTEMP | VARCHAR2 | Sea surface temperature during the setting of hooks. Units for values are degrees Fahrenheit. | |
100
|
BSHR | VARCHAR2 | Hour when line setting began. | |
100
|
BSMIN | VARCHAR2 | Minute when line setting began. | |
100
|
BSLATDEG | VARCHAR2 | Latitude degrees where line setting began. Units for values are degrees. | |
100
|
BSLATMIN | VARCHAR2 | Latitude minutes where line setting began. Units for values are minutes. | |
100
|
BSLATDIR | VARCHAR2 | Latitude hemisphere where line setting began. | |
100
|
BSLONGDEG | VARCHAR2 | Longitude degrees where line setting began. Units for values are degrees. | |
100
|
BSLONGMIN | VARCHAR2 | Longitude minutes where line setting began. Units for values are minutes. | |
100
|
BSLONGDIR | VARCHAR2 | Longitude hemisphere where line setting began. | |
100
|
ESHR | VARCHAR2 | Hour when line setting ended. | |
100
|
ESMIN | VARCHAR2 | Minute when line setting ended. | |
100
|
ESLATDEG | VARCHAR2 | Latitude degrees where line setting ended. Units for values are degrees. | |
100
|
ESLATMIN | VARCHAR2 | Latitude minutes where line setting ended. Units for values are minutes. | |
100
|
ESLATDIR | VARCHAR2 | Latitude hemisphere where line setting ended. | |
100
|
ESLONGDEG | VARCHAR2 | Longitude degrees where line setting ended. Units for values are degrees. | |
100
|
ESLONGMIN | VARCHAR2 | Longitude minutes where line setting ended. Units for values are minutes. | |
100
|
ESLONGDIR | VARCHAR2 | Longitude hemisphere where line setting ended. | |
100
|
HAULYR | VARCHAR2 | Four-digit year when the haul began. | |
100
|
HAULMON | VARCHAR2 | Two-digit month when the haul began. | |
100
|
HAULDAY | VARCHAR2 | Two-digit day when the haul began. | |
100
|
BHHR | VARCHAR2 | Hour when line hauling was started. | |
100
|
BHMIN | VARCHAR2 | Minute when line hauling was started. | |
100
|
BHLATDEG | VARCHAR2 | Latitude degrees where line hauling began. | |
100
|
BHLATMIN | VARCHAR2 | Latitude minutes where line hauling began. | |
100
|
BHLATDIR | VARCHAR2 | Latitude hemisphere where line hauling began. | |
100
|
BHLONGDEG | VARCHAR2 | Longitude degrees where line hauling began. | |
100
|
BHLONGMIN | VARCHAR2 | Longitude minutes where line hauling began. | |
100
|
BHLONGDIR | VARCHAR2 | Longitude hemisphere where line hauling began. | |
100
|
EHHR | VARCHAR2 | Hour when line hauling ended. | |
100
|
EHMIN | VARCHAR2 | Minute when line hauling ended. | |
100
|
EHLATDEG | VARCHAR2 | Latitude degrees where line hauling ended. | |
100
|
EHLATMIN | VARCHAR2 | Latitude minutes where line hauling ended. | |
100
|
EHLATDIR | VARCHAR2 | Latitude hemisphere where line hauling ended. | |
100
|
EHLONGDEG | VARCHAR2 | Longitude degrees where line hauling ended. | |
100
|
EHLONGMIN | VARCHAR2 | Longitude minutes where line hauling ended. | |
100
|
EHLONGDIR | VARCHAR2 | Longitude hemisphere where line hauling ended. | |
100
|
CML | VARCHAR2 | Commercial Marine License (CML) number. | |
100
|
SIGNYR | VARCHAR2 | Four-digit year when form was signed by the CML holder. | |
100
|
SIGNMON | VARCHAR2 | Two-digit month when form was signed by the CML holder. | |
100
|
SIGNDAY | VARCHAR2 | Two-digit day when form was signed by the fisher. | |
100
|
EDIT | VARCHAR2 | Code signifying when in the editing process a correction was made to this record. | |
100
|
SERIALNUM | VARCHAR2 | It is the page number that is printed on the logbook form, the number assigned by the electronic logbook program, or other solutions to enable identifying unique sets. A value is required. | |
100
|
OBSERVER_YN | VARCHAR2 | Was an observer onboard? (Y/NULL). | |
100
|
DEPART_YR | VARCHAR2 | Four-digit year fishing boat left port. | |
100
|
DEPART_MON | VARCHAR2 | Two-digit month fishing boat left port. | |
100
|
DEPART_DAY | VARCHAR2 | Two-digit day fishing boat left port. | |
100
|
DEPART_PORT | VARCHAR2 | Code to represent departing port of vessel. Uses three-letter Airline City Codes. | |
100
|
RETURN_YR | VARCHAR2 | Four-digit year boat returned to port. | |
100
|
RETURN_MON | VARCHAR2 | Two-digit month boat returned to port. | |
100
|
RETURN_DAY | VARCHAR2 | Two-digit day boat returned to port. | |
100
|
RETURN_PORT | VARCHAR2 | Code to represent returning port of vessel. Uses three-letter Airline City Codes. | |
100
|
NIGHT_SETTING | VARCHAR2 | Bird mitigation. Was the set made at night? 1=used. | |
100
|
DYED_BAIT | VARCHAR2 | Bird mitigation. Was the bait dyed blue? 1=used. | |
100
|
TOWED_DETERRENT | VARCHAR2 | Bird mitigation. Was a towed deterrent used? 1=used. | |
100
|
WEIGHTED_GEAR | VARCHAR2 | Bird mitigation. Was the gear weighted? 1=used. | |
100
|
LINE_SHOOTER | VARCHAR2 | Bird mitigation. Was a line shooter used? 1=used. | |
100
|
OFFAL_DISCARD | VARCHAR2 | Bird mitigation. Was the offal discarded strategically? 1=used. | |
100
|
HOOKS_LOST | VARCHAR2 | Number of hooks lost on the set. | |
100
|
AREA | VARCHAR2 | Primary Economic Exclusivity Zone. Contains "OUT", or 4-letter EEZ code if Begin Set location is within established EEZ. | |
100
|
AREA2 | VARCHAR2 | Secondary Economic Exclusivity Zone. Contains NULL, or 4-letter EEZ code. | |
100
|
DISTANCE | VARCHAR2 | Distance, calculated from Begin Set location to predefined location in AREA2. | |
100
|
CERTNUM | VARCHAR2 | Unique number on the shallow-set certificate used to track each certificate (Hawaii Logbook Only). | |
100
|
SIDESET | VARCHAR2 | Was the line set over the side of the vessel instead of the rear? (Y/N). | |
100
|
TRIP_CORR | VARCHAR2 | Code signifying when in the editing process a correction was made to the trip data in this record. | |
100
|
TRIPLOCA | VARCHAR2 | Code signifying whether ALL trip locations were to the East, West, or Straddled Longitude 150. | |
100
|
OBSTRIPNUM | VARCHAR2 | The observer trip number as assigned by the Observer Program. | |
100
|
OBSSETNUM | VARCHAR2 | The number of the set as assigned by the onboard observer, left-justified, leading zero(s) missing. | |
100
|
SET_CORR | VARCHAR2 | Code signifying when in the editing process a correction was made to the set data in this record. | |
100
|
SET_TYPE | VARCHAR2 | Code signifying whether this set was either Deep or Shallow. | |
100
|
BSETLOCA | VARCHAR2 | Code signifying whether this begin set location is East or West of Longitude 150. If = 150, it is West. | |
100
|
ESETLOCA | VARCHAR2 | Code signifying whether this end set location is East or West of Longitude 150. If = 150, it is West. | |
100
|
BHAULOCA | VARCHAR2 | Code signifying whether this begin haul location is East or West of Longitude 150. If = 150, it is West. | |
100
|
EHAULOCA | VARCHAR2 | Code signifying whether this end haul location is East or West of Longitude 150. If = 150, it is west. | |
100
|
REMARKS | VARCHAR2 | A number or name assigned to any document containing any further notes on this trip. | |
100
|
FLEET | VARCHAR2 | Indicates fleet (or Logbook) to which this record belongs. (e.g., AS = American Samoa Longline Logbook). | |
100
|
MONUMENT | VARCHAR2 | Contains NULL, or 4-letter EEZ code if Begin Set location is within the Established Monument boundaries. | |
100
|
DPV | VARCHAR2 | Specifies whether a boat is a dual-permit vessel. Y = Yes, NULL = No. | |
100
|
BATCHNO | VARCHAR2 | A consecutive number assigned by the data entry staff to a block of data that is entered and verified. Format DYYNNN, where D is constant, YY is the last two digits of the year and NNN is the consecutive number that starts with 001 at the beginning of each calendar year, e.g., D14001. | |
100
|
VCODE | VARCHAR2 | Code based on the vessel's name, to disguise the identity of the boat, allowing release of data which could be otherwise confidential. | |
100
|
CONF | VARCHAR2 | Null field; used for American Samoa fleet only; denotes code for confidentiality. | |
100
|
SERIALNUM2 | VARCHAR2 | It is the page number that is printed on the logbook form or the number assigned by the electronic logbook program. |
Attribute Details
DATASET
Seq. Order: | 1 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 5 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Source ID code assigned by data entry staff (FC048). |
General Data Type: | VARCHAR2 |
VERSION
Seq. Order: | 2 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Format version of the data assigned by data entry staff. |
General Data Type: | VARCHAR2 |
TRIPTYPE
Seq. Order: | 3 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Trip type code (B)illfish, (T)una, (M)ixed. |
General Data Type: | VARCHAR2 |
TRIPNUM
Seq. Order: | 4 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
The logbook trip number as assigned by the logbook Data Manager after the trip has returned. A value is required. |
General Data Type: | VARCHAR2 |
RSCH_EXPMTL_CODE
Seq. Order: | 5 |
---|---|
Data Storage Type: | CHAR |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Is this trip a research or experimental trip? (R/X). |
General Data Type: | CHAR |
LANDYR
Seq. Order: | 6 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
Four-digit year that the boat returned to port. A value is required. |
General Data Type: | VARCHAR2 |
LANDMON
Seq. Order: | 7 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Month (00-12) that the boat returned to port. |
General Data Type: | VARCHAR2 |
SETYR
Seq. Order: | 8 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Four-digit year the set occurred. |
General Data Type: | VARCHAR2 |
SETMON
Seq. Order: | 9 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Two-digit month the set was made. |
General Data Type: | VARCHAR2 |
SETDAY
Seq. Order: | 10 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Two-digit day the set was made. |
General Data Type: | VARCHAR2 |
VESSELNAME
Seq. Order: | 11 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 20 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Name of vessel. |
General Data Type: | VARCHAR2 |
PERMITNUM
Seq. Order: | 12 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 12 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Permit number. |
General Data Type: | VARCHAR2 |
TARGET
Seq. Order: | 13 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
The code of the primary species of fish targeted to be caught on this trip, (T)una, (B)illfish, (M)ixed. |
General Data Type: | VARCHAR2 |
BAIT
Seq. Order: | 14 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code to represent what bait was used. |
General Data Type: | VARCHAR2 |
MAINLINE
Seq. Order: | 15 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Length in miles of mainline used. Units for values are nautical miles. |
General Data Type: | VARCHAR2 |
Unit of Measure: | nautical miles |
HOOKSSET
Seq. Order: | 16 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Number of hooks set. |
General Data Type: | VARCHAR2 |
MINHKSFLT
Seq. Order: | 17 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Minimum number of hooks used per float. |
General Data Type: | VARCHAR2 |
MAXHKSFLT
Seq. Order: | 18 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Maximum number of hooks used per float. |
General Data Type: | VARCHAR2 |
LIGHTSTICKS
Seq. Order: | 19 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Number of light sticks used. |
General Data Type: | VARCHAR2 |
MINWINDSPD
Seq. Order: | 20 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Minimum wind speed during the setting of hooks. Units for values are knots. |
General Data Type: | VARCHAR2 |
Unit of Measure: | knots |
MAXWINDSPD
Seq. Order: | 21 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Maximum wind speed during the setting of hooks. Units for values are knots. |
General Data Type: | VARCHAR2 |
Unit of Measure: | knots |
WINDDIR
Seq. Order: | 22 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Direction the wind was blowing during the setting of hooks. |
General Data Type: | VARCHAR2 |
MINWAVEHGT
Seq. Order: | 23 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Minimum wave height during the setting of hooks. Units for values are feet. |
General Data Type: | VARCHAR2 |
Unit of Measure: | feet |
MAXWAVEHGT
Seq. Order: | 24 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Maximum wave height during the setting of hooks. Units for values are feet. |
General Data Type: | VARCHAR2 |
Unit of Measure: | feet |
SURFTEMP
Seq. Order: | 25 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Sea surface temperature during the setting of hooks. Units for values are degrees Fahrenheit. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees Fahrenheit |
BSHR
Seq. Order: | 26 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Hour when line setting began. |
General Data Type: | VARCHAR2 |
BSMIN
Seq. Order: | 27 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Minute when line setting began. |
General Data Type: | VARCHAR2 |
BSLATDEG
Seq. Order: | 28 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Latitude degrees where line setting began. Units for values are degrees. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees |
BSLATMIN
Seq. Order: | 29 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Latitude minutes where line setting began. Units for values are minutes. |
General Data Type: | VARCHAR2 |
Unit of Measure: | minutes |
BSLATDIR
Seq. Order: | 30 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Latitude hemisphere where line setting began. |
General Data Type: | VARCHAR2 |
BSLONGDEG
Seq. Order: | 31 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Longitude degrees where line setting began. Units for values are degrees. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees |
BSLONGMIN
Seq. Order: | 32 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Longitude minutes where line setting began. Units for values are minutes. |
General Data Type: | VARCHAR2 |
Unit of Measure: | minutes |
BSLONGDIR
Seq. Order: | 33 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Longitude hemisphere where line setting began. |
General Data Type: | VARCHAR2 |
ESHR
Seq. Order: | 34 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Hour when line setting ended. |
General Data Type: | VARCHAR2 |
ESMIN
Seq. Order: | 35 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Minute when line setting ended. |
General Data Type: | VARCHAR2 |
ESLATDEG
Seq. Order: | 36 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Latitude degrees where line setting ended. Units for values are degrees. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees |
ESLATMIN
Seq. Order: | 37 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Latitude minutes where line setting ended. Units for values are minutes. |
General Data Type: | VARCHAR2 |
Unit of Measure: | minutes |
ESLATDIR
Seq. Order: | 38 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Latitude hemisphere where line setting ended. |
General Data Type: | VARCHAR2 |
ESLONGDEG
Seq. Order: | 39 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Longitude degrees where line setting ended. Units for values are degrees. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees |
ESLONGMIN
Seq. Order: | 40 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Longitude minutes where line setting ended. Units for values are minutes. |
General Data Type: | VARCHAR2 |
Unit of Measure: | minutes |
ESLONGDIR
Seq. Order: | 41 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Longitude hemisphere where line setting ended. |
General Data Type: | VARCHAR2 |
HAULYR
Seq. Order: | 42 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Four-digit year when the haul began. |
General Data Type: | VARCHAR2 |
HAULMON
Seq. Order: | 43 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Two-digit month when the haul began. |
General Data Type: | VARCHAR2 |
HAULDAY
Seq. Order: | 44 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Two-digit day when the haul began. |
General Data Type: | VARCHAR2 |
BHHR
Seq. Order: | 45 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Hour when line hauling was started. |
General Data Type: | VARCHAR2 |
BHMIN
Seq. Order: | 46 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Minute when line hauling was started. |
General Data Type: | VARCHAR2 |
BHLATDEG
Seq. Order: | 47 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Latitude degrees where line hauling began. |
General Data Type: | VARCHAR2 |
BHLATMIN
Seq. Order: | 48 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Latitude minutes where line hauling began. |
General Data Type: | VARCHAR2 |
BHLATDIR
Seq. Order: | 49 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Latitude hemisphere where line hauling began. |
General Data Type: | VARCHAR2 |
BHLONGDEG
Seq. Order: | 50 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Longitude degrees where line hauling began. |
General Data Type: | VARCHAR2 |
BHLONGMIN
Seq. Order: | 51 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Longitude minutes where line hauling began. |
General Data Type: | VARCHAR2 |
BHLONGDIR
Seq. Order: | 52 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Longitude hemisphere where line hauling began. |
General Data Type: | VARCHAR2 |
EHHR
Seq. Order: | 53 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Hour when line hauling ended. |
General Data Type: | VARCHAR2 |
EHMIN
Seq. Order: | 54 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Minute when line hauling ended. |
General Data Type: | VARCHAR2 |
EHLATDEG
Seq. Order: | 55 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Latitude degrees where line hauling ended. |
General Data Type: | VARCHAR2 |
EHLATMIN
Seq. Order: | 56 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Latitude minutes where line hauling ended. |
General Data Type: | VARCHAR2 |
EHLATDIR
Seq. Order: | 57 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Latitude hemisphere where line hauling ended. |
General Data Type: | VARCHAR2 |
EHLONGDEG
Seq. Order: | 58 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Longitude degrees where line hauling ended. |
General Data Type: | VARCHAR2 |
EHLONGMIN
Seq. Order: | 59 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Longitude minutes where line hauling ended. |
General Data Type: | VARCHAR2 |
EHLONGDIR
Seq. Order: | 60 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Longitude hemisphere where line hauling ended. |
General Data Type: | VARCHAR2 |
CML
Seq. Order: | 61 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 7 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Commercial Marine License (CML) number. |
General Data Type: | VARCHAR2 |
SIGNYR
Seq. Order: | 62 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Four-digit year when form was signed by the CML holder. |
General Data Type: | VARCHAR2 |
SIGNMON
Seq. Order: | 63 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Two-digit month when form was signed by the CML holder. |
General Data Type: | VARCHAR2 |
SIGNDAY
Seq. Order: | 64 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Two-digit day when form was signed by the fisher. |
General Data Type: | VARCHAR2 |
EDIT
Seq. Order: | 65 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code signifying when in the editing process a correction was made to this record. |
General Data Type: | VARCHAR2 |
SERIALNUM
Seq. Order: | 66 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 18 |
Required: | Yes |
Primary Key: | No |
Status: | Active |
Description: |
It is the page number that is printed on the logbook form, the number assigned by the electronic logbook program, or other solutions to enable identifying unique sets. A value is required. |
General Data Type: | VARCHAR2 |
OBSERVER_YN
Seq. Order: | 67 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Was an observer onboard? (Y/NULL). |
General Data Type: | VARCHAR2 |
DEPART_YR
Seq. Order: | 68 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Four-digit year fishing boat left port. |
General Data Type: | VARCHAR2 |
DEPART_MON
Seq. Order: | 69 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Two-digit month fishing boat left port. |
General Data Type: | VARCHAR2 |
DEPART_DAY
Seq. Order: | 70 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Two-digit day fishing boat left port. |
General Data Type: | VARCHAR2 |
DEPART_PORT
Seq. Order: | 71 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code to represent departing port of vessel. Uses three-letter Airline City Codes. |
General Data Type: | VARCHAR2 |
RETURN_YR
Seq. Order: | 72 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Four-digit year boat returned to port. |
General Data Type: | VARCHAR2 |
RETURN_MON
Seq. Order: | 73 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Two-digit month boat returned to port. |
General Data Type: | VARCHAR2 |
RETURN_DAY
Seq. Order: | 74 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Two-digit day boat returned to port. |
General Data Type: | VARCHAR2 |
RETURN_PORT
Seq. Order: | 75 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code to represent returning port of vessel. Uses three-letter Airline City Codes. |
General Data Type: | VARCHAR2 |
NIGHT_SETTING
Seq. Order: | 76 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Bird mitigation. Was the set made at night? 1=used. |
General Data Type: | VARCHAR2 |
DYED_BAIT
Seq. Order: | 77 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Bird mitigation. Was the bait dyed blue? 1=used. |
General Data Type: | VARCHAR2 |
TOWED_DETERRENT
Seq. Order: | 78 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Bird mitigation. Was a towed deterrent used? 1=used. |
General Data Type: | VARCHAR2 |
WEIGHTED_GEAR
Seq. Order: | 79 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Bird mitigation. Was the gear weighted? 1=used. |
General Data Type: | VARCHAR2 |
LINE_SHOOTER
Seq. Order: | 80 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Bird mitigation. Was a line shooter used? 1=used. |
General Data Type: | VARCHAR2 |
OFFAL_DISCARD
Seq. Order: | 81 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Bird mitigation. Was the offal discarded strategically? 1=used. |
General Data Type: | VARCHAR2 |
HOOKS_LOST
Seq. Order: | 82 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Number of hooks lost on the set. |
General Data Type: | VARCHAR2 |
AREA
Seq. Order: | 83 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Primary Economic Exclusivity Zone. Contains "OUT", or 4-letter EEZ code if Begin Set location is within established EEZ. |
General Data Type: | VARCHAR2 |
AREA2
Seq. Order: | 84 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Secondary Economic Exclusivity Zone. Contains NULL, or 4-letter EEZ code. |
General Data Type: | VARCHAR2 |
DISTANCE
Seq. Order: | 85 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 6 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Distance, calculated from Begin Set location to predefined location in AREA2. |
General Data Type: | VARCHAR2 |
CERTNUM
Seq. Order: | 86 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 9 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Unique number on the shallow-set certificate used to track each certificate (Hawaii Logbook Only). |
General Data Type: | VARCHAR2 |
SIDESET
Seq. Order: | 87 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Was the line set over the side of the vessel instead of the rear? (Y/N). |
General Data Type: | VARCHAR2 |
TRIP_CORR
Seq. Order: | 88 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code signifying when in the editing process a correction was made to the trip data in this record. |
General Data Type: | VARCHAR2 |
TRIPLOCA
Seq. Order: | 89 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code signifying whether ALL trip locations were to the East, West, or Straddled Longitude 150. |
General Data Type: | VARCHAR2 |
OBSTRIPNUM
Seq. Order: | 90 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 6 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
The observer trip number as assigned by the Observer Program. |
General Data Type: | VARCHAR2 |
OBSSETNUM
Seq. Order: | 91 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
The number of the set as assigned by the onboard observer, left-justified, leading zero(s) missing. |
General Data Type: | VARCHAR2 |
SET_CORR
Seq. Order: | 92 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code signifying when in the editing process a correction was made to the set data in this record. |
General Data Type: | VARCHAR2 |
SET_TYPE
Seq. Order: | 93 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code signifying whether this set was either Deep or Shallow. |
General Data Type: | VARCHAR2 |
BSETLOCA
Seq. Order: | 94 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code signifying whether this begin set location is East or West of Longitude 150. If = 150, it is West. |
General Data Type: | VARCHAR2 |
ESETLOCA
Seq. Order: | 95 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code signifying whether this end set location is East or West of Longitude 150. If = 150, it is West. |
General Data Type: | VARCHAR2 |
BHAULOCA
Seq. Order: | 96 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code signifying whether this begin haul location is East or West of Longitude 150. If = 150, it is West. |
General Data Type: | VARCHAR2 |
EHAULOCA
Seq. Order: | 97 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code signifying whether this end haul location is East or West of Longitude 150. If = 150, it is west. |
General Data Type: | VARCHAR2 |
REMARKS
Seq. Order: | 98 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 7 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
A number or name assigned to any document containing any further notes on this trip. |
General Data Type: | VARCHAR2 |
FLEET
Seq. Order: | 99 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Indicates fleet (or Logbook) to which this record belongs. (e.g., AS = American Samoa Longline Logbook). |
General Data Type: | VARCHAR2 |
MONUMENT
Seq. Order: | 100 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Contains NULL, or 4-letter EEZ code if Begin Set location is within the Established Monument boundaries. |
General Data Type: | VARCHAR2 |
DPV
Seq. Order: | 101 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Specifies whether a boat is a dual-permit vessel. Y = Yes, NULL = No. |
General Data Type: | VARCHAR2 |
BATCHNO
Seq. Order: | 102 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 6 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
A consecutive number assigned by the data entry staff to a block of data that is entered and verified. Format DYYNNN, where D is constant, YY is the last two digits of the year and NNN is the consecutive number that starts with 001 at the beginning of each calendar year, e.g., D14001. |
General Data Type: | VARCHAR2 |
VCODE
Seq. Order: | 103 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code based on the vessel's name, to disguise the identity of the boat, allowing release of data which could be otherwise confidential. |
General Data Type: | VARCHAR2 |
CONF
Seq. Order: | 104 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Null field; used for American Samoa fleet only; denotes code for confidentiality. |
General Data Type: | VARCHAR2 |
SERIALNUM2
Seq. Order: | 105 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 18 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
It is the page number that is printed on the logbook form or the number assigned by the electronic logbook program. |
General Data Type: | VARCHAR2 |
Catalog Details
Catalog Item ID: | 50941 |
---|---|
GUID: | gov.noaa.nmfs.inport:50941 |
Metadata Record Created By: | Brent M Miyamoto |
Metadata Record Created: | 2017-12-29 16:19+0000 |
Metadata Record Last Modified By: | Bradley M Gough |
Metadata Record Last Modified: | 2025-02-20 00:44+0000 |
Metadata Record Published: | 2025-02-20 |
Owner Org: | PIFSC |
Metadata Publication Status: | Published Externally |
Do Not Publish?: | N |
Metadata Review Frequency: | 1 Year |