Data Management Plan
GUID: gov.noaa.nmfs.inport:5447 | Published / External
Data Management Plan
DMP Template v2.0.1 (2015-01-01)
Please provide the following information, and submit to the NOAA DM Plan Repository.Reference to Master DM Plan (if applicable)
As stated in Section IV, Requirement 1.3, DM Plans may be hierarchical. If this DM Plan inherits provisions from a higher-level DM Plan already submitted to the Repository, then this more-specific Plan only needs to provide information that differs from what was provided in the Master DM Plan.
1. General Description of Data to be Managed
These are tables used to process the loads of gulf shrimp data. It contains pre-validation tables, error tables and information about statistics on data loads.
It contains no data tables and no code tables.
This information need not be published
data set contains catch (landed catch) and effort for fishing trips made by the larger vessels that fish near and offshore for the various species of shrimp in the Gulf of Mexico. The data set also contains landings by the smaller boats that fish in the bays, lakes, bayous, and rivers for saltwater shrimp species; however, these landings data may be aggregated for multiple trip and may not provide effort data similar to the data for the larger vessels. The landings statistics in this data set consist of the quantity and value for the individual species of shrimp by size category type and quantity of gear, fishing duration and fishing area The data collection procedures for the catch/effort data for the large vessels consist of two parts. The landings statistics are collected from the seafood dealers after the trips are unloaded; whereas, the data on fishing effort and area are collected by interviews with the captain or crew while the trip is being unloaded.
Notes: Only a maximum of 4000 characters will be included.
Notes: Data collection is considered ongoing if a time frame of type "Continuous" exists.
Notes: All time frames from all extent groups are included.
Landings From The Gulf Of Mexico Ports. For the states of Florida, Alabama, Mississippi, Louisiana , and Texas
Notes: All geographic areas from all extent groups are included.
(e.g., digital numeric data, imagery, photographs, video, audio, database, tabular data, etc.)
(e.g., satellite, airplane, unmanned aerial system, radar, weather station, moored buoy, research vessel, autonomous underwater vehicle, animal tagging, manual surveys, enforcement activities, numerical model, etc.)
2. Point of Contact for this Data Management Plan (author or maintainer)
Notes: The name of the Person of the most recent Support Role of type "Metadata Contact" is used. The support role must be in effect.
Notes: The name of the Organization of the most recent Support Role of type "Metadata Contact" is used. This field is required if applicable.
3. Responsible Party for Data Management
Program Managers, or their designee, shall be responsible for assuring the proper management of the data produced by their Program. Please indicate the responsible party below.
Notes: The name of the Person of the most recent Support Role of type "Data Steward" is used. The support role must be in effect.
4. Resources
Programs must identify resources within their own budget for managing the data they produce.
5. Data Lineage and Quality
NOAA has issued Information Quality Guidelines for ensuring and maximizing the quality, objectivity, utility, and integrity of information which it disseminates.
(describe or provide URL of description):
(describe or provide URL of description):
6. Data Documentation
The EDMC Data Documentation Procedural Directive requires that NOAA data be well documented, specifies the use of ISO 19115 and related standards for documentation of new data, and provides links to resources and tools for metadata creation and validation.
Missing/invalid information:
- 1.6. Type(s) of data
- 1.7. Data collection method(s)
- 2.1. Point of Contact Name
- 2.4. Point of Contact Email
- 3.1. Responsible Party for Data Management
- 4.1. Have resources for management of these data been identified?
- 4.2. Approximate percentage of the budget for these data devoted to data management
- 5.1. Processing workflow of the data from collection or acquisition to making it publicly accessible
- 5.2. Quality control procedures employed
- 7.1. Do these data comply with the Data Access directive?
- 7.1.1. If data are not available or has limitations, has a Waiver been filed?
- 7.1.2. If there are limitations to data access, describe how data are protected
- 7.4. Approximate delay between data collection and dissemination
- 8.1. Actual or planned long-term data archive location
- 8.3. Approximate delay between data collection and submission to an archive facility
- 8.4. How will the data be protected from accidental or malicious modification or deletion prior to receipt by the archive?
(describe or provide URL of description):
7. Data Access
NAO 212-15 states that access to environmental data may only be restricted when distribution is explicitly limited by law, regulation, policy (such as those applicable to personally identifiable information or protected critical infrastructure information or proprietary trade information) or by security requirements. The EDMC Data Access Procedural Directive contains specific guidance, recommends the use of open-standard, interoperable, non-proprietary web services, provides information about resources and tools to enable data access, and includes a Waiver to be submitted to justify any approach other than full, unrestricted public access.
Password restricted. To access confidential data under Magnuson-Stevens Act) a completed non-disclosure agreement must be on file with NOAA-SEFSC. Otherwise Data that are submitted as confidential can be released to the public under the following circumstances:
1. Combined or aggregated data. Confidential data can be released if the data are aggregated or summarized in a manner that prevents the identification of the person or organization that submitted the data. The "rule of three" and identification of majority allocations" are the primary data suppression methods.
2. Obscure (scramble) or remove the data identifier. For some types of data, confidential data Can be released as non-confidential if the identity of the person, vessel, company, etc. that submitted the data is not included or is scrambled as part of the data that are released.
3. Submitter. Confidential data collected under federal authority Can be released to the original entity (person, vessel, business, etc.) that sUbmitted the data.
4. Confidential data waived. The protection of confidential data can be waived by the person or business that submitted the data.
Notes: The name of the Organization of the most recent Support Role of type "Distributor" is used. The support role must be in effect. This information is not required if an approved access waiver exists for this data.
Notes: This field is required if a Distributor has not been specified.
Notes: All URLs listed in the Distribution Info section will be included. This field is required if applicable.
Read and sign for NOAA Administrative Order 216-100
Read and sign System Access Application (see URLs)
Notes: This field is required if applicable.
8. Data Preservation and Protection
The NOAA Procedure for Scientific Records Appraisal and Archive Approval describes how to identify, appraise and decide what scientific records are to be preserved in a NOAA archive.
(Specify NCEI-MD, NCEI-CO, NCEI-NC, NCEI-MS, World Data Center (WDC) facility, Other, To Be Determined, Unable to Archive, or No Archiving Intended)
Notes: This field is required if archive location is World Data Center or Other.
Notes: This field is required if archive location is To Be Determined, Unable to Archive, or No Archiving Intended.
Notes: Physical Location Organization, City and State are required, or a Location Description is required.
Discuss data back-up, disaster recovery/contingency planning, and off-site data storage relevant to the data collection
9. Additional Line Office or Staff Office Questions
Line and Staff Offices may extend this template by inserting additional questions in this section.