Data Management Plan
DMP Template v2.0.1 (2015-01-01)Please provide the following information, and submit to the NOAA DM Plan Repository.
Reference to Master DM Plan (if applicable)
As stated in Section IV, Requirement 1.3, DM Plans may be hierarchical. If this DM Plan inherits provisions from a higher-level DM Plan already submitted to the Repository, then this more-specific Plan only needs to provide information that differs from what was provided in the Master DM Plan.
1. General Description of Data to be Managed
The dataset encompasses 307.96 square miles in portions of Umatilla County in the state of Oregon. The bare earth digital elevation model (DEM) represents the earth's surface with all vegetation and human-made structures removed. The bare earth DEMs were derived from lidar data using TIN processing of the ground point returns. The DEM grid cell size is 3 feet. The projection is Oregon Statewide Lambert Conformal Conic, units are in International Feet. The horizontal datum is NAD 83 (2011) and vertical datum is NAVD88 (Geoid 12A). Some elevation values have been interpolated across areas in the models where there is no elevation data (e.g. over water, over dense vegetation). Watershed Sciences, Inc. collected the lidar and created this data set for the Oregon Department of Geology and Mineral Industries (DOGAMI).
Notes: Only a maximum of 4000 characters will be included.
Notes: Data collection is considered ongoing if a time frame of type "Continuous" exists.
Notes: All time frames from all extent groups are included.
Milton Freewater, OR
Notes: All geographic areas from all extent groups are included.
(e.g., digital numeric data, imagery, photographs, video, audio, database, tabular data, etc.)
(e.g., satellite, airplane, unmanned aerial system, radar, weather station, moored buoy, research vessel, autonomous underwater vehicle, animal tagging, manual surveys, enforcement activities, numerical model, etc.)
2. Point of Contact for this Data Management Plan (author or maintainer)
Notes: The name of the Person of the most recent Support Role of type "Metadata Contact" is used. The support role must be in effect.
Notes: The name of the Organization of the most recent Support Role of type "Metadata Contact" is used. This field is required if applicable.
3. Responsible Party for Data Management
Program Managers, or their designee, shall be responsible for assuring the proper management of the data produced by their Program. Please indicate the responsible party below.
Notes: The name of the Person of the most recent Support Role of type "Data Steward" is used. The support role must be in effect.
Programs must identify resources within their own budget for managing the data they produce.
5. Data Lineage and Quality
NOAA has issued Information Quality Guidelines for ensuring and maximizing the quality, objectivity, utility, and integrity of information which it disseminates.
(describe or provide URL of description):
Watershed Sciences Inc. has collected Light Detection and Ranging (LIDAR) data in the Milton-Freewater Study Area for the Oregon Department of Geology and Mineral Industries (DOGAMI). NOAA OCM has taken the data and ingested it into the Digital Coast Data Access Viewer for distribution.
- 2016-05-28 00:00:00 - Acquisition. LiDAR data acquisition was conducted from June 06 to June 20, 2016. The survey utilized a Leica ALS 80 laser system mounted in a Cessna 208. Scan angles near nadir were used to increase penetration of vegetation to ground surfaces. Ground level GPS and aircraft IMU were collected during the flight.
- 2016-07-05 00:00:00 - Processing. 1. TRAJECTORY: Aircraft trajectory (position and attitude) were calculated based on on-board GPS and IMU data with post-processing refinement through coincident static GPS collection. 2. POST-PROCESSING: Laser point return coordinates (x,y,z) were computed using sensor-specific post processing software, combining LiDAR return range and intensity information with aircraft trajectory information. 3. INITIAL QAQC: The post-processed LiDAR files were assembled into flight lines and reviewed for gaps and consistency, as well as systematic noise. 4. CALIBRATION: Custom algorithms evaluated individual swaths for misalignments based on IMU configuration as well as aircraft attitude variability. Offsets were resolved through surface and linear matching algorithms that minimize variability in elevation and slope. Descriptive statistics, thresholds, and specifications providing transparency for data calibration are discussed in the accompanying Data Report. 5. GROUND MODELING: Ground classified point cloud was generated through proprietary data processing tools, with settings and thresholds appropriate to landscape and vegetation condition. 6. ARTIFACT FILTRATION: Noise and processing artifacts were filtered using post-processing software and proprietary quality control methods. 7. ACCURACY ASSESSMENT: Vertical accuracy for the LiDAR dataset was assessed against Ground Check Points (GCP) distributed throughout the study area. See the accompanying Data Report for methodology, descriptive statistics, and relevant standards and reporting language. 8. DATA PRODUCT: LiDAR points classified as 'ground' were output as a digital elevation model (DEM). (Citation: raw lidar data)
- 2019-08-29 00:00:00 - NOAA/OCM received the data from DOGAMI in Arc Grid format . Data were in NAD83(2011) Oregon Lambert horizontally and NAVD88 (Geoid12a) vertically. All units were international feet. For ingest into the Digital Coast Data Access Viewer and adhere to the Open Data Policy, data were converted to GeoTiff format. (Citation: processed lidar data)
(describe or provide URL of description):
6. Data Documentation
The EDMC Data Documentation Procedural Directive requires that NOAA data be well documented, specifies the use of ISO 19115 and related standards for documentation of new data, and provides links to resources and tools for metadata creation and validation.
- 1.7. Data collection method(s)
- 3.1. Responsible Party for Data Management
- 5.2. Quality control procedures employed
- 7.1.1. If data are not available or has limitations, has a Waiver been filed?
- 7.4. Approximate delay between data collection and dissemination
- 8.3. Approximate delay between data collection and submission to an archive facility
(describe or provide URL of description):
7. Data Access
NAO 212-15 states that access to environmental data may only be restricted when distribution is explicitly limited by law, regulation, policy (such as those applicable to personally identifiable information or protected critical infrastructure information or proprietary trade information) or by security requirements. The EDMC Data Access Procedural Directive contains specific guidance, recommends the use of open-standard, interoperable, non-proprietary web services, provides information about resources and tools to enable data access, and includes a Waiver to be submitted to justify any approach other than full, unrestricted public access.
Notes: The name of the Organization of the most recent Support Role of type "Distributor" is used. The support role must be in effect. This information is not required if an approved access waiver exists for this data.
Notes: This field is required if a Distributor has not been specified.
Notes: All URLs listed in the Distribution Info section will be included. This field is required if applicable.
Data is available online for custom downloads
Notes: This field is required if applicable.
8. Data Preservation and Protection
The NOAA Procedure for Scientific Records Appraisal and Archive Approval describes how to identify, appraise and decide what scientific records are to be preserved in a NOAA archive.
(Specify NCEI-MD, NCEI-CO, NCEI-NC, NCEI-MS, World Data Center (WDC) facility, Other, To Be Determined, Unable to Archive, or No Archiving Intended)
Notes: This field is required if archive location is World Data Center or Other.
Notes: This field is required if archive location is To Be Determined, Unable to Archive, or No Archiving Intended.
Notes: Physical Location Organization, City and State are required, or a Location Description is required.
Discuss data back-up, disaster recovery/contingency planning, and off-site data storage relevant to the data collection
Data is backed up to tape and to cloud storage.
9. Additional Line Office or Staff Office Questions
Line and Staff Offices may extend this template by inserting additional questions in this section.