Search Help Show/Hide Menu
Summary
Item Identification
Keywords
Physical Location
Data Set Info
Support Roles
Extents
Spatial Info
Access Info
Distribution Info
URLs
Tech Environment
Data Quality
Lineage
Catalog Details

Summary

Browse Graphic

Short Citation
OCM Partners, 2024: 2018 USACE NCMP Post-Florence Topobathy Lidar: Southeast Coast (VA, NC, SC), https://www.fisheries.noaa.gov/inport/item/57341.
Full Citation Examples

Abstract

These files contain classified topo/bathy lidar data. Data are classified as 1 (valid non-ground topographic data), 2 (valid ground topographic data), and 29 (valid bathymetric data). Classes 1 and 2 are defined in accordance with the American Society for Photogrammetry and Remote Sensing (ASPRS) classification standards. These data were collected by the Coastal Zone Mapping and Imaging Lidar (CZMIL) system. CZMIL integrates a lidar sensor with simultaneous topographic and bathymetric capabilities, a digital camera and a hyperspectral imager on a single remote sensing platform for use in coastal mapping and charting activities. Native lidar data is not generally in a format accessible to most Geographic Information Systems (GIS). Specialized in-house and commercial software packages are used to process the native lidar data into 3-dimensional positions that can be imported into GIS software for visualization and further analysis. The 3-D position data are sub-divided into 1-km by 1-km tiles, which are based on the Military Grid Reference System (MGRS).

In addition to the lidar point data, topobathy bare earth Digital Elevation Models (DEMs) at a 1 meter grid spacing, created from the lidar point data, and the RGB imagery are also available from the NOAA Digital Coast. Links to these data are provided in the URL section of this metadata record.

Distribution Information

  • Create custom data files by choosing data area, product type, map projection, file format, datum, etc.

  • LAS/LAZ - LASer

    Simple download of data files.

Access Constraints:

These data have been developed from the best available sources. Although efforts have been made to ensure that the data are accurate and reliable, errors and variable conditions originating from physical sources used to develop the data may be reflected in the data supplied. Users must be aware of these conditions and bear responsibility for the appropriate use of the information with respect to possible errors, scale, resolution, rectification, positional accuracy, development methodology, time period, environmental and climatic conditions and other circumstances specific to these data. The user is responsible for understanding the accuracy limitations of the data provided herein. The burden for determining fitness for use lies entirely with the user. The user should refer to the accompanying metadata notes for a description of the data and data development procedures.

Use Constraints:

These data depict the heights at the time of the survey and are only accurate for that time. Acknowledgement of the Joint Airborne Lidar Bathymetry Technical Center of eXpertise (JALBTCX) would be appreciated in any publications or derived products. The data herein, including but not limited to geographic data, tabular data, analytical data, electronic data structures or files, are provided "as is" without warranty of any kind, either expressed or implied, or statutory, including, but not limited to, the implied warranties or merchantability and fitness for a particular purpose. The entire risk as to the quality and performance of the data is assumed by the user. No guarantee of accuracy is granted, nor is any responsibility for reliance thereon assumed. In no event shall the U.S. Army Corps of Engineers, Mobile District Office, Spatial Data Branch be liable for direct, indirect, incidental, consequential or special damages of any kind, including, but not limited to, loss of anticipated profits or benefits arising out of use of or reliance on the data. The Spatial Data Branch does not accept liability for any damages or misrepresentation caused by inaccuracies in the data or as a result of changes to the data caused by system transfers or other transformations or conversions, nor is there responsibility assumed to maintain the data in any manner or form. Users should be aware that temporal changes may have occurred since this dataset was collected and that some parts of these data may no longer represent actual surface conditions. Users should not use these data for critical applications without a full awareness of its limitations.

Controlled Theme Keywords

BATHYMETRY, COASTAL ELEVATION, DOD/USARMY/USACE/SAM/MOBILE/OPJ/JALBTCX, elevation, GEOMORPHIC LANDFORMS/PROCESSES, imageryBaseMapsEarthCover, LAND USE CLASSES, oceans, SEAFLOOR TOPOGRAPHY, TERRAIN ELEVATION

Child Items

No Child Items for this record.

Contact Information

Point of Contact
NOAA Office for Coastal Management (NOAA/OCM)
coastal.info@noaa.gov
(843) 740-1202
https://coast.noaa.gov

Metadata Contact
NOAA Office for Coastal Management (NOAA/OCM)
coastal.info@noaa.gov
(843) 740-1202
https://coast.noaa.gov

Extents

Geographic Area 1

-79.190227° W, -75.452938° E, 36.9246° N, 33.210606° S

Time Frame 1
2018-10-02 - 2018-10-03

SC dates of collection

Time Frame 2
2018-10-02 - 2018-10-15

VA, NC dates of collection

Item Identification

Title: 2018 USACE NCMP Post-Florence Topobathy Lidar: Southeast Coast (VA, NC, SC)
Short Name: usace2018_post_florence_m8617_metadata.xml
Status: Completed
Creation Date: 2019-08-30
Publication Date: 2019-09-06
Abstract:

These files contain classified topo/bathy lidar data. Data are classified as 1 (valid non-ground topographic data), 2 (valid ground topographic data), and 29 (valid bathymetric data). Classes 1 and 2 are defined in accordance with the American Society for Photogrammetry and Remote Sensing (ASPRS) classification standards. These data were collected by the Coastal Zone Mapping and Imaging Lidar (CZMIL) system. CZMIL integrates a lidar sensor with simultaneous topographic and bathymetric capabilities, a digital camera and a hyperspectral imager on a single remote sensing platform for use in coastal mapping and charting activities. Native lidar data is not generally in a format accessible to most Geographic Information Systems (GIS). Specialized in-house and commercial software packages are used to process the native lidar data into 3-dimensional positions that can be imported into GIS software for visualization and further analysis. The 3-D position data are sub-divided into 1-km by 1-km tiles, which are based on the Military Grid Reference System (MGRS).

In addition to the lidar point data, topobathy bare earth Digital Elevation Models (DEMs) at a 1 meter grid spacing, created from the lidar point data, and the RGB imagery are also available from the NOAA Digital Coast. Links to these data are provided in the URL section of this metadata record.

Purpose:

This data was collected by USACE on behalf of the USACE NCMP to assess elevations above and below water along the southeast US coast after Hurricane Florence.

Keywords

Theme Keywords

Thesaurus Keyword
Global Change Master Directory (GCMD) Data Center Keywords
DOD/USARMY/USACE/SAM/MOBILE/OPJ/JALBTCX > Joint Airborne Lidar Bathymetry Technical Center of Expertise, Mobile District, South Atlantic Division, U.S. Army Corps of Engineers, U.S. Army, U.S. Department of Defense
Global Change Master Directory (GCMD) Science Keywords
EARTH SCIENCE > HUMAN DIMENSIONS > ENVIRONMENTAL GOVERNANCE/MANAGEMENT > LAND MANAGEMENT > LAND USE CLASSES
Global Change Master Directory (GCMD) Science Keywords
EARTH SCIENCE > LAND SURFACE > GEOMORPHIC LANDFORMS/PROCESSES
Global Change Master Directory (GCMD) Science Keywords
EARTH SCIENCE > LAND SURFACE > TOPOGRAPHY > TERRAIN ELEVATION
Global Change Master Directory (GCMD) Science Keywords
EARTH SCIENCE > OCEANS > BATHYMETRY/SEAFLOOR TOPOGRAPHY > BATHYMETRY
Global Change Master Directory (GCMD) Science Keywords
EARTH SCIENCE > OCEANS > BATHYMETRY/SEAFLOOR TOPOGRAPHY > SEAFLOOR TOPOGRAPHY
Global Change Master Directory (GCMD) Science Keywords
EARTH SCIENCE > OCEANS > COASTAL PROCESSES > COASTAL ELEVATION
ISO 19115 Topic Category
elevation
ISO 19115 Topic Category
imageryBaseMapsEarthCover
ISO 19115 Topic Category
oceans
UNCONTROLLED
None Florence
None Hurricane
None U.S. Army Corps of Engineers (USACE)

Temporal Keywords

Thesaurus Keyword
UNCONTROLLED
None 2018
None October

Spatial Keywords

Thesaurus Keyword
Global Change Master Directory (GCMD) Location Keywords
CONTINENT > NORTH AMERICA > UNITED STATES OF AMERICA
Global Change Master Directory (GCMD) Location Keywords
CONTINENT > NORTH AMERICA > UNITED STATES OF AMERICA > NORTH CAROLINA
Global Change Master Directory (GCMD) Location Keywords
CONTINENT > NORTH AMERICA > UNITED STATES OF AMERICA > SOUTH CAROLINA
Global Change Master Directory (GCMD) Location Keywords
CONTINENT > NORTH AMERICA > UNITED STATES OF AMERICA > VIRGINIA
Global Change Master Directory (GCMD) Location Keywords
VERTICAL LOCATION > LAND SURFACE
Global Change Master Directory (GCMD) Location Keywords
VERTICAL LOCATION > SEA FLOOR

Instrument Keywords

Thesaurus Keyword
Global Change Master Directory (GCMD) Instrument Keywords
LIDAR > Light Detection and Ranging

Platform Keywords

Thesaurus Keyword
Global Change Master Directory (GCMD) Platform Keywords
Airplane > Airplane

Physical Location

Organization: Office for Coastal Management
City: Charleston
State/Province: SC

Data Set Information

Data Set Scope Code: Data Set
Data Set Type: Other
Maintenance Frequency: As Needed
Data Presentation Form: Point Cloud (Digital)
Distribution Liability:

These data have been developed from the best available sources. Although efforts have been made to ensure that the data are accurate and reliable, errors and variable conditions originating from physical sources used to develop the data may be reflected in the data supplied. Users must be aware of these conditions and bear responsibility for the appropriate use of the information with respect to possible errors, scale, resolution, rectification, positional accuracy, development methodology, time period, environmental and climatic conditions and other circumstances specific to these data. The user is responsible for understanding the accuracy limitations of the data provided herein. The burden for determining fitness for use lies entirely with the user. The user should refer to the accompanying metadata notes for a description of the data and data development procedures. Any conclusions drawn from the analysis of this information are not the responsibility of USACE, JALBTCX, the Office for Coastal Management, or its partners.

Data Set Credit: Acknowledgement of the Joint Airborne Lidar Bathymetry Technical Center of eXpertise (JALBTCX) would be appreciated in any publications or derived products.

Support Roles

Data Steward

CC ID: 870820
Date Effective From: 2019-08-30
Date Effective To:
Contact (Organization): NOAA Office for Coastal Management (NOAA/OCM)
Address: 2234 South Hobson Ave
Charleston, SC 29405-2413
Email Address: coastal.info@noaa.gov
Phone: (843) 740-1202
URL: https://coast.noaa.gov

Distributor

CC ID: 870822
Date Effective From: 2019-08-30
Date Effective To:
Contact (Organization): NOAA Office for Coastal Management (NOAA/OCM)
Address: 2234 South Hobson Ave
Charleston, SC 29405-2413
Email Address: coastal.info@noaa.gov
Phone: (843) 740-1202
URL: https://coast.noaa.gov

Metadata Contact

CC ID: 870823
Date Effective From: 2019-08-30
Date Effective To:
Contact (Organization): NOAA Office for Coastal Management (NOAA/OCM)
Address: 2234 South Hobson Ave
Charleston, SC 29405-2413
Email Address: coastal.info@noaa.gov
Phone: (843) 740-1202
URL: https://coast.noaa.gov

Point of Contact

CC ID: 870821
Date Effective From: 2019-08-30
Date Effective To:
Contact (Organization): NOAA Office for Coastal Management (NOAA/OCM)
Address: 2234 South Hobson Ave
Charleston, SC 29405-2413
Email Address: coastal.info@noaa.gov
Phone: (843) 740-1202
URL: https://coast.noaa.gov

Extents

Currentness Reference: Ground Condition

Extent Group 1

Extent Group 1 / Geographic Area 1

CC ID: 1149295
W° Bound: -79.190227
E° Bound: -75.452938
N° Bound: 36.9246
S° Bound: 33.210606

Extent Group 1 / Time Frame 1

CC ID: 1149293
Time Frame Type: Range
Start: 2018-10-02
End: 2018-10-03
Description:

SC dates of collection

Extent Group 1 / Time Frame 2

CC ID: 1149294
Time Frame Type: Range
Start: 2018-10-02
End: 2018-10-15
Description:

VA, NC dates of collection

Spatial Information

Spatial Representation

Representations Used

Vector: Yes

Reference Systems

Reference System 1

CC ID: 1149291

Coordinate Reference System

CRS Type: Geographic 3D
EPSG Code: EPSG:6319
EPSG Name: NAD83(2011)
See Full Coordinate Reference System Information

Access Information

Security Class: Unclassified
Data Access Procedure:

Data is available online for bulk and custom downloads.

Data Access Constraints:

These data have been developed from the best available sources. Although efforts have been made to ensure that the data are accurate and reliable, errors and variable conditions originating from physical sources used to develop the data may be reflected in the data supplied. Users must be aware of these conditions and bear responsibility for the appropriate use of the information with respect to possible errors, scale, resolution, rectification, positional accuracy, development methodology, time period, environmental and climatic conditions and other circumstances specific to these data. The user is responsible for understanding the accuracy limitations of the data provided herein. The burden for determining fitness for use lies entirely with the user. The user should refer to the accompanying metadata notes for a description of the data and data development procedures.

Data Use Constraints:

These data depict the heights at the time of the survey and are only accurate for that time. Acknowledgement of the Joint Airborne Lidar Bathymetry Technical Center of eXpertise (JALBTCX) would be appreciated in any publications or derived products. The data herein, including but not limited to geographic data, tabular data, analytical data, electronic data structures or files, are provided "as is" without warranty of any kind, either expressed or implied, or statutory, including, but not limited to, the implied warranties or merchantability and fitness for a particular purpose. The entire risk as to the quality and performance of the data is assumed by the user. No guarantee of accuracy is granted, nor is any responsibility for reliance thereon assumed. In no event shall the U.S. Army Corps of Engineers, Mobile District Office, Spatial Data Branch be liable for direct, indirect, incidental, consequential or special damages of any kind, including, but not limited to, loss of anticipated profits or benefits arising out of use of or reliance on the data. The Spatial Data Branch does not accept liability for any damages or misrepresentation caused by inaccuracies in the data or as a result of changes to the data caused by system transfers or other transformations or conversions, nor is there responsibility assumed to maintain the data in any manner or form. Users should be aware that temporal changes may have occurred since this dataset was collected and that some parts of these data may no longer represent actual surface conditions. Users should not use these data for critical applications without a full awareness of its limitations.

Distribution Information

Distribution 1

CC ID: 870824
Download URL: https://coast.noaa.gov/dataviewer/#/lidar/search/where:ID=8617
Distributor: NOAA Office for Coastal Management (NOAA/OCM) (2019-08-30 - Present)
File Name: Customized Download
Description:

Create custom data files by choosing data area, product type, map projection, file format, datum, etc.

File Type (Deprecated): Zip
Compression: Zip

Distribution 2

CC ID: 870825
Download URL: https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid12b/8617/index.html
Distributor: NOAA Office for Coastal Management (NOAA/OCM) (2019-08-30 - Present)
File Name: Bulk Download
Description:

Simple download of data files.

File Type (Deprecated): LAZ
Distribution Format: LAS/LAZ - LASer
Compression: Zip

URLs

URL 1

CC ID: 870826
URL: https://coast.noaa.gov/dataviewer/#/imagery/search/where:ID=8854
URL Type:
Online Resource
Description:

Link to the South Carolina RGB Imagery.

URL 2

CC ID: 870827
URL: https://coast.noaa.gov/dataviewer
URL Type:
Online Resource
Description:

The Data Access Viewer (DAV) allows a user to search for and download elevation, imagery, and land cover data for the coastal U.S. and its territories. The data, hosted by the NOAA Office for Coastal Management, can be customized and requested for free download through a checkout interface. An email provides a link to the customized data, while the original data set is available through a link within the viewer.

URL 3

CC ID: 870828
URL: https://coast.noaa.gov/dataregistry
URL Type:
Online Resource

URL 4

CC ID: 870829
URL: https://coast.noaa.gov/
URL Type:
Online Resource
Description:

nformation on the NOAA Office for Coastal Management (OCM).

URL 5

CC ID: 870830
URL: https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid12b/8617/supplemental/usace2018_post_florence_m8617.kmz
Name: Browse Graphic
URL Type:
Browse Graphic
File Resource Format: kmz
Description:

This graphic shows the lidar coverage for the 2018 topobathy lidar acquisition along the US east coast.

URL 6

CC ID: 870831
URL: https://coast.noaa.gov/dataviewer/#/lidar/search/where:ID=8853
URL Type:
Online Resource
Description:

Link to custom download, from the Data Access Viewer (DAV), the raster Digital Elevation Model (DEM) data that were created from this lidar data set.

URL 7

CC ID: 897288
URL: https://coast.noaa.gov/dataviewer/#/imagery/search/where:ID=8906
Name: RGB Imagery
URL Type:
Online Resource
Description:

Link to the North Carolina RGB Imagery.

URL 8

CC ID: 897289
URL: https://coast.noaa.gov/dataviewer/#/imagery/search/where:ID=9021
Name: RGB Imagery
URL Type:
Online Resource
Description:

Link to the Virginia RGB Imagery.

Technical Environment

Description:

Microsoft Windows 7 Version 6.1 (Build 7601) Service Pack 1; Esri ArcGIS 10.1.0.3035

Data Quality

Accuracy:

Every effort within operational constraints was made to acquire data that meets specifications as outline in this project's Statement of Work. Per flight block, elevations in areas of swath overlap are internally consistent and meet CZMIL specifications. Annomalous high and/or low elevation values have been removed, and point cloud classificaiton algorithms have been validated via manual review and QC. Temporal differences in elevation exist in areas of active nearshore processes from the dune to the depth of closure. JALBTCX conducts operations in a manner to ameliorate temporal differences, to include the collection of entire flight blocks within single missions. For a given flight block, it's adjacent flight blocks are captured within 3 days as weather and airspace permit.

Horizontal Positional Accuracy:

CZMIL topographic data - Compiled to meet 1 m horizontal accuracy at 95% confidence level. CZMIL bathymetric data - Compiled to meet 3.5 + 0.05d m horizontal accuracy at 95% confidence level, d is depth.

JALBTCX evaluates the horizontal accuracy of the final data coverage against available basemap imagery products. The final lidar point cloud is gridded according to procedures defined in the JALBTCX Standard Operating Guide and Appendices (SOGA). The grid products are then visually compared to basemap imagery products to verify the horizontal positions of large buildings and other urban features with the data coverage.

Vertical Positional Accuracy:

CZMIL topographic data - Compiled to meet 19.6 cm vertical accuracy at 95% confidence level. CZMIL bathymetric shallow FOV data - Compiled to meet SQRT((0.20^2) +((0.0075d)^2)) m vertical accuracy at 95% confidence level, d is depth. CZMIL bathymetric deep FOV data - Compiled to meet SQRT((0.30^2) +((0.013d)^2)) m vertical accuracy at 95% confidence level, d is depth.

JALBTCX evaluates the vertical accuracy of the final data coverage against traditional ground-truth data. Ground-truth data is acquired and utilized according to specifications outlined in the JALBTCX Standard Operating Guide and Appendices (SOGA) as well as the USGS Lidar BaseSpecification. The final lidar point cloud at every project ground-truth location is compared against ground-truth points in the 'bare_ground' class. Comparisons are performed in the QCoherent LP360 software package, and the final results are output to JALBTCX's Ground Truth Comparison Report.

Completeness Measure:

Planned data coverage for this dataset included a 750-meter swath of the North Carolina, Virginia, and South Carolina shoreline. Topographic lidar coverage was obtained from the shoreline onshore 250 meters. Bathymetric lidar coverage extends from the shoreline offshore 500 meters or to laser extinction, whichever occurs first. The planned data density is 2 points/m² on land and in shallow water. In deeper water the planned data density decreases to 0.7 points/m². Gaps or data holidays may exist in the data coverage. They arise due to a number of operational and environmental conditions, including but not limited to, airspace restrictions, high terrain, active surf, low-reflectivity bottom substrate materials and turbidity in the water column. Please see the Report of Survey for additional details.

Every effort within operational constraints was made to achieve the intended data coverage and planned point densities.

Completeness Report:

This data set covers the spatial extent of topographic lidar data obtained during this survey.

Conceptual Consistency:

No discernable offsets or horizontal shifts were found during visual inspecton of the lidar-derived grid products against basemap imagery products. Data passes assessments against ground-truth points.

Quality Control Procedures Employed:

JALBTCX evaluates final data coverage using techniques that are common to the lidar industry. These techniques are performed in a 3D environment for visual review of the final data coverage and verification of data alongside lidar waveforms and imagery collected concurrent with the lidar. Data reviewers perform checks to verify (1) extreme high and/or low elevation values have been invalidated, (2) elevations in areas of swath overlap are internally consistent, (3) binned standard deviation values meet CZMIL specifications, (4) point cloud classifications are valid, and (4) CZMIL processing modes are valid.

Lineage

Lineage Statement:

The steps below outline the basic workflow JALBTCX employs to produce lidar point clouds.

Process Steps

Process Step 1

CC ID: 1149287
Description:

These data were collected using the CZMIL system. It is owned and operated by the U.S. Army Corps of Engineers (USACE). The system collects topobathy lidar data at 10 kHz and RGB imagery at 2 Hz. A CASI-1500 hyperspectral line scanner is integrated with the system as well. Aircraft position, velocity and acceleration information are collected through a combination of Novatel and POS A/V 510 equipment. All raw data streams are transferred to the office for downloading and processing in CZMIL’s Hydro Fusion software. Aircraft position data are processed using POSPac software and the results are combined with the lidar data to produce 3-D positions for each lidar shot. Upon inspection and QA/QC in the software packages Fledermaus and PFM_ABE, anomalous data are flagged as invalid and have the withheld bit set. PFM_ABE software then exports valid lidar data as a series of unclassified LAS files.

Process Date/Time: 2018-10-02 00:00:00

Process Step 2

CC ID: 1149288
Description:

LAS files are imported into TerraScan V18 module within Microstation V8i, classifies valid topobathy data as ground points (2) and unclassified points (1), and valid bathymetric points (29). Upon completion the macro, the classification results undergo quality control and any misclassified points are manually edited. In areas of dense vegetation the bare earth ground points might be incorrectly classified due to the inability of the laser to penetrate the canopy and reach the bare ground. In these areas, JALBTCX defaults to the algorithm’s “ground” surface instead of manually reclassifying those points. They are partitioned into a series of 1-km delivery boxes, one Classified LAS file per box. The format of the file is LAS version 1.2. Data are classified as 1 (valid non-ground topographic data), 2 (valid ground topographic data), and 29 (valid bathymetric data).

Process Date/Time: 2019-05-16 00:00:00

Process Step 3

CC ID: 1149289
Description:

The NOAA Office for Coastal Management (OCM) received 190 laz files for the South Carolina coastline from USACE JALBTCX. The lidar data had elevation and intensity measurements. The data were in geographic coordinates (NAD83 2011) and ellipsoid elevations in meters. The data were classified as: 1 - Unclassified, 2 - Ground, 29 - Bathymetric Point. OCM processed all classifications of points to the Digital Coast Data Access Viewer (DAV). Classes available on the DAV are: 1, 2, 29.

OCM performed the following processing on the data for Digital Coast storage and provisioning purposes:

1. The LAStools software scripts lasinfo and lasvalidate were run on the laz files to check for errors.

2. An internal OCM script was run to check the number of points by classification and by flight ID and the gps and intensity ranges.

3. Internal OCM scripts were run on the laz files to assign the geokeys, to sort the data by gps time and zip the data to database and to https.

Process Date/Time: 2019-08-30 00:00:00
Process Contact: Office for Coastal Management (OCM)

Process Step 4

CC ID: 1149290
Description:

The NOAA Office for Coastal Management (OCM) received 1151 laz files for the North Carolina coastline and 84 laz files for the Virginia coastline from USACE JALBTCX in February 2020. The lidar data had elevation and intensity measurements. The data were in geographic coordinates (NAD83 2011) and ellipsoid elevations in meters. The data were classified as: 1 - Unclassified, 2 - Ground, 29 - Bathymetric Point. OCM processed all classifications of points to the Digital Coast Data Access Viewer (DAV). Classes available on the DAV are: 1, 2, 29.

OCM performed the following processing on the data for Digital Coast storage and provisioning purposes:

1. An internal OCM script was run to check the number of points by classification and by flight ID and the gps and intensity ranges.

2. Internal OCM scripts were run on the laz files to assign the geokeys, to sort the data by gps time and zip the data to database and to https.

Process Date/Time: 2020-02-14 00:00:00
Process Contact: Office for Coastal Management (OCM)

Catalog Details

Catalog Item ID: 57341
GUID: gov.noaa.nmfs.inport:57341
Metadata Record Created By: Rebecca Mataosky
Metadata Record Created: 2019-08-30 10:42+0000
Metadata Record Last Modified By: SysAdmin InPortAdmin
Metadata Record Last Modified: 2023-10-17 16:12+0000
Metadata Record Published: 2022-03-16
Owner Org: OCMP
Metadata Publication Status: Published Externally
Do Not Publish?: N
Metadata Last Review Date: 2022-03-16
Metadata Review Frequency: 1 Year
Metadata Next Review Date: 2023-03-16