2018 USGS/NRCS Lidar DEM: Southeast Florida

Any conclusions drawn from the analysis of this information are not the responsibility of NOAA, the Office for Coastal Management or its partners

Data is available online for bulk or custom downloads

None

Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations.

Five checkpoints were determined to be photo-identifiable in the intensity imagery and were used to test the horizontal accuracy of the lidar dataset. As only five (5) checkpoints were photo-identifiable, the results are not statistically significant enough to report as a final tested value.

Using NSSDA methodology (endorsed by the ASPRS Positional Accuracy Standards for Digital Geospatial Data (2014)), horizontal accuracy at the 95% confidence level (called ACCURACYr) is computed by the formula RMSEr * 1.7308 or RMSExy * 2.448.

This data set was produced to meet ASPRS Positional Accuracy Standards for Digital Geospatial Data (2014) for a 41 cm RMSEx/RMSEy Horizontal Accuracy Class which equates to Positional Horizontal Accuracy = +/- 1 meter at a 95% confidence level. Five (5) checkpoints were photo identifiable, but do not produce a statistically significant tested horizontal accuracy value. Using this small sample set of photo-identifiable checkpoints, positional accuracy of this dataset was found to be RMSEx = 20.2 cm and RMSEy = 20.7 cm which equates to +/- 50.0 cm at 95% confidence level. While not statistically significant, the results of the small sample set of checkpoints are within the designated horizontal accuracy.

The project specifications require the accuracy (ACCz) of the derived DEM be calculated and reported in two ways: 1. The required NVA is: 19.6 cm at a 95% confidence level, derived according to NSSDA, i.e., based on RMSE of 10 cm in the "bare earth" and "urban" land cover classes. This is a required accuracy. The NVA was tested with 69 checkpoints located in bare earth and urban (non-vegetated) areas. 2. Vegetated Vertical Accuracy (VVA): VVA shall be reported for "brushlands/low trees" and "tall weeds/crops" land cover classes. The target VVA is: 30 cm at the 95th percentile, derived according to ASPRS Guidelines, Vertical Accuracy Reporting for Lidar Data, i.e., based on the 95th percentile error in all vegetated land cover classes combined. This is a target accuracy. The VVA was tested with 56 checkpoints located in tall weeds/crops and brushlands/low trees (vegetated) areas. The checkpoints were distributed throughout the project area and were surveyed using GPS techniques. See survey report for additional survey methodologies. AccuracyZ has been tested to meet 19.6 cm or better Non-Vegetated Vertical Accuracy at 95% confidence level using RMSE(z) x 1.9600 as defined by the National Standards for Spatial Data Accuracy (NSSDA); assessed and reported using National Digital Elevation Program (NDEP)/ASRPS Guidelines.Qualitative value:0.080 0.209, Test that produced the value: Tested 8.0 cm (0.26 ft) NVA at a 95% confidence level using RMSE(z) x 1.9600 as defined by the National Standards for Spatial Data Accuracy (NSSDA). The NVA of the DEM was calculated using 69 independent checkpoints located in the Bare Earth and Urban land cover categories. Tested 20.9 cm (0.69 ft) VVA was calculated using 56 checkpoints located in the Brushlands and Low Trees and Tall Weeds and Crops land cover categories at the 95th percentile, derived according to ASPRS Guidelines, Vertical Accuracy Reporting for Lidar Data. Tested against the DEM.

Datasets contain complete coverage of tiles. No points have been removed or excluded. A visual qualitative assessment was performed to ensure data completeness. There are no void areas or missing data. The raw point cloud is of good quality and data passes Non-Vegetated Vertical Accuracy specifications.

Data covers the entire area specified for this project.