2015 OLC Topobathy Lidar DEM (Voids): Middle Fork Willamette River, OR
Data Set (DS) | OCM Partners (OCMP)GUID: gov.noaa.nmfs.inport:62792 | Updated: January 10, 2024 | Published / External
Summary
Short Citation
OCM Partners, 2024: 2015 OLC Topobathy Lidar DEM (Voids): Middle Fork Willamette River, OR, https://www.fisheries.noaa.gov/inport/item/62792.
Full Citation Examples
Airborne topobathymetric lidar derived digital elevation model (DEM) with voids in areas where no bathymetric points could be obtained, collected for the Middle Fork of Willamette River, Oregon in 2015.
In September 2015, Quantum Spatial (QSI) was contracted by the Oregon LiDAR Consortium (OLC) to collect topobathymetric Light Detection and Ranging (LiDAR) data in the fall of 2015 for the Middle Fork Willamette River site in Oregon. The Middle Fork Willamette River area of interest stretches between Eugene/Springfield and Dexter Dam and Fall Creek below Fall Creek Dam. Traditional near-infrared (NIR) LiDAR was fully integrated with green wavelength return data (bathymetric) LiDAR in order to provide seamless and complete project mapping.
Distribution Information
-
Application to create custom data files by choosing data area, product type, map projection, file format, datum, etc. A new metadata will be produced to reflect your request using this record as a base.
-
GeoTIFF
Bulk download of data files in original projection.
None
Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations.
Controlled Theme Keywords
elevation, SEAFLOOR TOPOGRAPHY, TERRAIN ELEVATION
Child Items
No Child Items for this record.
Contact Information
Metadata Contact
Office for Coastal Management (OCM)
https://www.coast.noaa.gov/
Extents
-123.0368° W,
-122.74759° E,
44.050142° N,
43.9083° S
Area includes the Middle Fork, Wilamette River and a buffer of land around it.
2015-09-14 - 2015-09-15
Collection dates of lidar
Item Identification
Title: | 2015 OLC Topobathy Lidar DEM (Voids): Middle Fork Willamette River, OR |
---|---|
Status: | Completed |
Creation Date: | 2015 |
Publication Date: | 2015 |
Abstract: |
Airborne topobathymetric lidar derived digital elevation model (DEM) with voids in areas where no bathymetric points could be obtained, collected for the Middle Fork of Willamette River, Oregon in 2015. In September 2015, Quantum Spatial (QSI) was contracted by the Oregon LiDAR Consortium (OLC) to collect topobathymetric Light Detection and Ranging (LiDAR) data in the fall of 2015 for the Middle Fork Willamette River site in Oregon. The Middle Fork Willamette River area of interest stretches between Eugene/Springfield and Dexter Dam and Fall Creek below Fall Creek Dam. Traditional near-infrared (NIR) LiDAR was fully integrated with green wavelength return data (bathymetric) LiDAR in order to provide seamless and complete project mapping. |
Purpose: |
Data were collected to aid OLC in providing a complete topobathymetric dataset to be used in analyses of the long term impacts associated with sediment deposition on downstream habitat and channel morphology. |
Keywords
Theme Keywords
Thesaurus | Keyword |
---|---|
Global Change Master Directory (GCMD) Science Keywords |
EARTH SCIENCE > LAND SURFACE > TOPOGRAPHY > TERRAIN ELEVATION
|
Global Change Master Directory (GCMD) Science Keywords |
EARTH SCIENCE > OCEANS > BATHYMETRY/SEAFLOOR TOPOGRAPHY > SEAFLOOR TOPOGRAPHY
|
ISO 19115 Topic Category |
elevation
|
Spatial Keywords
Thesaurus | Keyword |
---|---|
Global Change Master Directory (GCMD) Location Keywords |
CONTINENT > NORTH AMERICA > UNITED STATES OF AMERICA
|
Global Change Master Directory (GCMD) Location Keywords |
CONTINENT > NORTH AMERICA > UNITED STATES OF AMERICA > OREGON
|
Global Change Master Directory (GCMD) Location Keywords |
VERTICAL LOCATION > LAND SURFACE
|
Instrument Keywords
Thesaurus | Keyword |
---|---|
Global Change Master Directory (GCMD) Instrument Keywords |
LIDAR > Light Detection and Ranging
|
Platform Keywords
Thesaurus | Keyword |
---|---|
Global Change Master Directory (GCMD) Platform Keywords |
Airplane > Airplane
|
Physical Location
Organization: | Office for Coastal Management |
---|---|
City: | Charleston |
State/Province: | SC |
Data Set Information
Data Set Scope Code: | Data Set |
---|---|
Data Set Type: | Elevation |
Maintenance Frequency: | As Needed |
Data Presentation Form: | Model (digital) |
Entity Attribute Overview: |
Digital elevation model incorporating both topographic ground measurements as well as bathymetric bottom points for the area of interest in Willamette river. |
Data Set Credit: | Oregon Lidar Consortium; Quantum Spatial, Inc; DOGAMI |
Support Roles
Data Steward
Date Effective From: | 2020-08-14 |
---|---|
Date Effective To: | |
Contact (Organization): | Office for Coastal Management (OCM) |
Address: |
2234 South Hobson Avenue Charleston, SC 29405-2413 |
URL: | https://www.coast.noaa.gov/ |
Distributor
Date Effective From: | 2020-08-14 |
---|---|
Date Effective To: | |
Contact (Organization): | Office for Coastal Management (OCM) |
Address: |
2234 South Hobson Avenue Charleston, SC 29405-2413 |
URL: | https://www.coast.noaa.gov/ |
Metadata Contact
Date Effective From: | 2020-08-14 |
---|---|
Date Effective To: | |
Contact (Organization): | Office for Coastal Management (OCM) |
Address: |
2234 South Hobson Avenue Charleston, SC 29405-2413 |
URL: | https://www.coast.noaa.gov/ |
Extents
Currentness Reference: | Ground Condition |
---|
Extent Group 1
Extent Group 1 / Geographic Area 1
W° Bound: | -123.0368 | |
---|---|---|
E° Bound: | -122.74759 | |
N° Bound: | 44.050142 | |
S° Bound: | 43.9083 | |
Description |
Area includes the Middle Fork, Wilamette River and a buffer of land around it. |
Extent Group 1 / Time Frame 1
Time Frame Type: | Range |
---|---|
Start: | 2015-09-14 |
End: | 2015-09-15 |
Description: |
Collection dates of lidar |
Spatial Information
Reference Systems
Reference System 1
Coordinate Reference System |
|||||||||||||||||||||||||||||||||||||||||
|
Access Information
Security Class: | Unclassified |
---|---|
Data Access Constraints: |
None |
Data Use Constraints: |
Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations. |
Distribution Information
Distribution 1
Start Date: | 2020-08-14 |
---|---|
End Date: | Present |
Download URL: | https://coast.noaa.gov/dataviewer/#/lidar/search/where:ID=9169 |
Distributor: | Office for Coastal Management (OCM) (2020-08-14 - Present) |
Description: |
Application to create custom data files by choosing data area, product type, map projection, file format, datum, etc. A new metadata will be produced to reflect your request using this record as a base. |
File Type (Deprecated): | Multiple formats |
Compression: | Zip |
Distribution 2
Start Date: | 2020-08-14 |
---|---|
End Date: | Present |
Download URL: | https://noaa-nos-coastal-lidar-pds.s3.us-east-1.amazonaws.com/dem/OLC_willamette_river_topobathy_voids_2015_9169/index.html |
Distributor: | Office for Coastal Management (OCM) (2020-08-14 - Present) |
Description: |
Bulk download of data files in original projection. |
File Type (Deprecated): | GeoTIFF |
Distribution Format: | GeoTIFF |
URLs
URL 1
URL: | https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/9168/supplemental/2015_Middle_Fork_Willamette_Topobathymetric_Data_Report.pdf |
---|---|
Name: | Data set report |
URL Type: |
Online Resource
|
File Resource Format: | |
Description: |
Report by WSI that formed the basis for this metadata. Contains additional information. |
URL 2
URL: | https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/9168/supplemental/extent_MiddleFork_Willamette_m9168.kmz |
---|---|
Name: | Data set extent |
URL Type: |
Browse Graphic
|
File Resource Format: | kmz |
Description: |
graphic showing the extent of the data set. |
Data Quality
Vertical Positional Accuracy: |
Absolute accuracy was assessed using Fundamental Vertical Accuracy (FVA) reporting designed to meet guidelines presented in the FGDC National Standard for Spatial Data Accuracy3. FVA compares known ground check point data collected on open, bare earth surfaces with level slope (<20 degrees) to the triangulated surface generated by the LiDAR points. FVA is a measure of the accuracy of LiDAR point data in open areas where the LiDAR system has a high probability of measuring the ground surface and is evaluated at the 95% confidence interval (1.96 * RMSE). The mean and standard deviation (sigma ) of divergence of the ground surface model from ground check point coordinates are also considered during accuracy assessment. These statistics assume the error for x, y and z is normally distributed, and therefore the skew and kurtosis of distributions are also considered when evaluating error statistics. For the Middle Fork Willamette River survey, 30 ground check points were withheld in total resulting in a fundamental vertical accuracy of 0.060 meters at the 95% confidence interval (1.96 * RMSE). Additionally, 45 bathymetric (submerged or along the water’s edge) check points were also collected in order to assess the submerged surface vertical accuracy, resulting in an average absolute accuracy of 0.012 meters at the 95% confidence interval (1.96 * RMSE). QSI also assessed absolute accuracy using 555 ground control points. Although these points were used in the calibration and post-processing of the LiDAR point cloud, they may still provide a good indication of the overall accuracy of the LiDAR dataset, and therefore have been provided - please see the dataset report for more details. |
---|---|
Completeness Report: |
The specified depth penetration range of the Riegl VQ-820-G sensor is one secchi depth; therefore, bathymetry data below one secchi depth at the time of acquisition is not to be expected. To assist in evaluating performance results of the sensor, a polygon layer was created to delineate areas where bathymetry was successfully mapped. This shapefile was used to control the extent of the delivered clipped topo-bathymetric model and to avoid false triangulation across areas in the water with no returns. Insufficiently mapped areas were identified by triangulating bathymetric bottom points with an edge length maximum of 4.56 meters. This ensured all areas of no returns (> 9 m2), were identified as data voids. Of the areas successfully mapped, 46.50% had a calculated depth of 0 – 0.5m, 38.00% had a calculated depth of 0.51 -1.0 m, 13.89% had a calculated depth of 1.01 – 1.5m, and the remaining 1.61% had a calculated depth between 1.51m and 6.5m (Table 9, project report). |
Lineage
Sources
lidar data
Contact Role Type: | Originator |
---|---|
Contact Type: | Organization |
Contact Name: | Quantum Spatial, Inc. |
Process Steps
Process Step 1
Description: |
Planning: The airborne survey was designed to collect a point density of 4-5 pulses/m2 for the topo-bathymetric LiDAR. The flight was planned with a scan angle of ±20o and 50% side-lap. The 50% side-lap was used to ensure uniform coverage and to minimize laser shadowing due to vegetation and terrain. The flights were conducted in the late fall during base flow conditions to maximize water clarity and ensure shallow depths. The flight lines were developed using ALTM-NAV Planner (v.3.0) software and Leica Mission Pro Flight Planning and Evaluation (FPES) software. Efforts were taken to optimize flight paths by minimizing flight times while meeting all accuracy specifications. The WSI acquisition staff considered all factors such as air space restrictions, private property access, and GPS quality in the planning of this mission. |
---|---|
Process Date/Time: | 2015-09-01 00:00:00 |
Process Step 2
Description: |
Lidar Survey: The LiDAR survey was accomplished using a Leica ALS80 system dually mounted with a Riegl VQ-820-G topobathymetric sensor in a Cessna Caravan. The Riegl VQ-820-G uses a green wavelength (ʎ=532 nm) laser that is capable of collecting high resolution vegetation and topography data, as well as penetrating the water surface with minimal spectral absorption by water. The recorded waveform enables range measurements for all discernible targets for a given pulse. The Leica ALS80 laser system can record unlimited range measurements (returns) per pulse. It is not uncommon for some types of surfaces (e.g., dense vegetation or water) to return fewer pulses to the LiDAR sensor than the laser originally emitted. The discrepancy between first return and overall delivered density will vary depending on terrain, land cover, and the prevalence of water bodies. All discernible laser returns were processed for the output dataset. Table 3 (dataset report) summarizes the settings used to yield an average pulse densityof ≥4.0 points/m2 for green LiDAR returns, and ≥8.0 points/m2 for NIR LiDAR returns over the Middle Fork Willamette River project area. |
---|---|
Process Date/Time: | 2015-09-01 00:00:00 |
Process Step 3
Description: |
Lidar Processing: Upon completion of data acquisition, QSI processing staff initiated a suite of automated and manual techniques to process the data into the requested deliverables. Processing tasks included GPS control computations, smoothed best estimate trajectory (SBET) calculations, kinematic corrections, calculation of laser point position, sensor and data calibration for optimal relative and absolute accuracy, and LiDAR point classification (Table 7). Riegl’s RiProcess software was used to facilitate bathymetric return processing. Once bathymetric points were differentiated, they were spatially corrected for refraction through the water column based on the angle of incidence of the laser. QSI refracted water column points using QSI’s proprietary LAS processing software, LAS Monkey. The resulting point cloud data were classified using both manual and automated techniques. Processing methodologies were tailored for the landscape. |
---|---|
Process Date/Time: | 2015-09-30 00:00:00 |
Process Step 4
Description: |
The NOAA Office for Coastal Management received the lidar DEM data from the Oregon Lidar Consortium. Data were received in NAD83(2011) UTM zone 10 meters with vertical coordinates in NAVD88(GEOID 12A) meters. They were converted to geoTiff format with georeferencing added for ingest into the Data Access Viewer. Metadata was not delivered with the data. This metadata was created from the WSI report. |
---|---|
Process Date/Time: | 2020-08-14 00:00:00 |
Process Contact: | Office for Coastal Management (OCM) |
Source: | lidar data |
Catalog Details
Catalog Item ID: | 62792 |
---|---|
GUID: | gov.noaa.nmfs.inport:62792 |
Metadata Record Created By: | Blake Waring |
Metadata Record Created: | 2020-08-17 13:57+0000 |
Metadata Record Last Modified By: | Kirk Waters |
Metadata Record Last Modified: | 2024-01-10 19:13+0000 |
Metadata Record Published: | 2024-01-10 |
Owner Org: | OCMP |
Metadata Publication Status: | Published Externally |
Do Not Publish?: | N |
Metadata Last Review Date: | 2022-03-16 |
Metadata Review Frequency: | 1 Year |
Metadata Next Review Date: | 2023-03-16 |