AMMOP_HAUL
Entity (ENT) | Alaska Fisheries Science Center (AFSC)GUID: gov.noaa.nmfs.inport:75080 | Updated: May 21, 2025 | Published / External
-
View As
- Full List View
- Printable Form
- EXPORTS
- InPort XML
- View in Hierarchy
Summary
This table contains a list of hauls that occurred during an observers sample.
Entity Information
Data Attribute / Type | Description |
---|---|
AIR_TEMP
VARCHAR2(8 BYTE) |
Air temperature at the time of haul. Celsius |
COMMENTS
VARCHAR2(2048 BYTE) |
Additional information. |
DISTANCE_OBSV_NET_MAXIMUM
VARCHAR2(6 BYTE) |
Maximum distance between the observer vessel and the location of the fishing vessel where the net is hauled aboard for the duration of the haul, in whole meters. |
DISTANCE_OBSV_NET_MINIMUM
VARCHAR2(6 BYTE) |
Minimum distance between the observer vessel and the location of the fishing vessel where the net is hauled aboard for the duration of the haul, in whole meters. |
DISTANCE_SHORE_MAXIMUM
VARCHAR2(6 BYTE) |
Maximum net distance to shore in meters. |
DISTANCE_SHORE_MINIMUM
VARCHAR2(6 BYTE) |
Minimum net distance to shore in meters. |
EVIDENCE_OF_BLOW_THROUGH
VARCHAR2(1 BYTE) |
Any evidence of net blowthrough, Y=Yes, N=No. |
GEAR_DAMAGE_CODE_ID
NUMBER(6,0) |
Gear condition at end of haul. references AMMOP_GEAR_DAMAGE_CODE( |
GEAR_DAMAGE_LOCATION_HOR_ID
NUMBER(6,0) |
Horizontal location of gear damage after haul. references AMMOP_GEAR_DAMAGE_LH_CODE |
GEAR_DAMAGE_LOCATION_VER_ID
NUMBER(6,0) |
Vertical location of gear damage after haul. references AMMOP_GEAR_DAMAGE_LV_CODE |
GEAR_DAMAGE_OBSTRUCTION_ID
NUMBER(6,0) |
Gear obstructions at end of haul. references AMMOP_GEAR_DAMAGE_OBS_CODE |
HAUL_BEGIN_DATE
DATE |
Date haul began. |
HAUL_BEGIN_DEPTH
VARCHAR2(6 BYTE) |
Water depth, in whole fathoms, where haul began. |
HAUL_BEGIN_DEPTH_FROM
VARCHAR2(1 BYTE) |
How depth obtained, O=Observer, P=Permit Holder, C=Marine Chart. |
HAUL_BEGIN_LATITUDE
VARCHAR2(9 BYTE) |
Latitude location, in tenths of minutes (ddmm.m), where the haul began. |
HAUL_BEGIN_LONGITUDE
VARCHAR2(9 BYTE) |
Longitude location, in tenths of minutes (ddmm.m), where the haul began. |
HAUL_BEGIN_TIME
VARCHAR2(4 BYTE) |
Time haul began. Military time. |
HAUL_END_DATE
DATE |
Date haul ended. |
HAUL_END_DEPTH
VARCHAR2(6 BYTE) |
Water depth, in whole fathoms, where haul ended. |
HAUL_END_DEPTH_FROM
VARCHAR2(1 BYTE) |
How depth obtained, O=Observer, P=Permit Holder, C=Marine Chart. |
HAUL_END_LATITUDE
VARCHAR2(9 BYTE) |
Latitude location, in tenths of minutes (ddmm.m), where the haul ended. |
HAUL_END_LONGITUDE
VARCHAR2(9 BYTE) |
Longitude location, in tenths of minutes (ddmm.m), where the haul ended. |
HAUL_END_TIME
VARCHAR2(4 BYTE) |
Time haul ended. Military time. |
HAUL_ID
NUMBER(6,0) |
Human assigned haul number. |
HYDRAULIC_PUMP_USED
VARCHAR2(1 BYTE) |
Hydraulic pump used to clean net, Y=Yes,N=No. |
ID
NUMBER(6,0) |
Unique table ID value. Populated by AMMOP_HAUL_SEQ |
INCIDENTAL_TAKE_OBSERVED
VARCHAR2(1 BYTE) |
Incidental take observed, Y=Yes, N=No. |
LAND_FEATURE_ID
NUMBER(6,0) |
Best description of nearest land feature. references AMMOP_LAND_FEATURE_CODE |
MARINE_ZONE_ID
NUMBER(6,0) |
Best description of marine zone. references MM_FISHING_ZONE |
NET_ID
NUMBER(6,0) |
Reference to gear used in haul. |
NET_VIEW_DISTANCE
VARCHAR2(8 BYTE) |
Distance to net. meters |
NET_VIEW_PERCENT_OBSTRUCTED
VARCHAR2(9 BYTE) |
Percent view obstructed. |
NET_VIEW_PERCENT_UNDERWATER
VARCHAR2(9 BYTE) |
Percent net underwater when viewed. |
NET_VIEW_RANK_CODE
VARCHAR2(6 BYTE) |
Net view rank code. |
OBSERVED_HAUL
VARCHAR2(1 BYTE) |
Partially or Fully. |
PERCENT_NET_HAULED
VARCHAR2(9 BYTE) |
Percentage of net that was actually pulled out of the water to any degree during this haul. |
PERCENT_NET_OBSERVED
VARCHAR2(9 BYTE) |
Percentage of net that was actually observed being hauled during this haul. |
PERCENT_TOTAL_NET_SET
VARCHAR2(9 BYTE) |
Percentage of net set prior to haul. |
RIVER_HEIGHT
VARCHAR2(6 BYTE) |
River height of nearest large river. |
SAMPLE_ID
VARCHAR2(10 BYTE) |
Reference to sample haul is a part of. |
SET_BEGIN_DATE
DATE |
Date set began. |
SET_BEGIN_DEPTH
VARCHAR2(6 BYTE) |
Water depth, in whole fathoms, where set began. |
SET_BEGIN_DEPTH_FROM
VARCHAR2(1 BYTE) |
How depth obtained, O=Observer, P=Permit Holder, C=Marine Chart. |
SET_BEGIN_LATITUDE
VARCHAR2(9 BYTE) |
Latitude location, in tenths of minutes (dddmm.m), where the set began. |
SET_BEGIN_LONGITUDE
VARCHAR2(9 BYTE) |
Longitude location, in tenths of minutes (dddmm.m), where the set began. |
SET_BEGIN_TIME
VARCHAR2(4 BYTE) |
Time set began. Military time |
SET_END_DATE
DATE |
Date set ended. |
SET_END_DEPTH
VARCHAR2(6 BYTE) |
Water depth, in whole fathoms, where set ended. |
SET_END_DEPTH_FROM
VARCHAR2(1 BYTE) |
How depth obtained, O=Observer, P=Permit Holder, C=Marine Chart. |
SET_END_LATITUDE
VARCHAR2(9 BYTE) |
Latitude location, in tenths of minutes (ddmm.m), where the set ended. |
SET_END_LONGITUDE
VARCHAR2(9 BYTE) |
Longitude location, in tenths of minutes (ddmm.m), where the set ended. |
SET_END_TIME
VARCHAR2(4 BYTE) |
Time set ended. Military time. |
SET_OBSERVED
VARCHAR2(1 BYTE) |
Any part of set observed, Y=Yes, N=No. |
SOAK_BEGIN_CORKLINE_SHAPE_ID
NUMBER(6,0) |
Corkline shape at the beginning of the soak. references AMMOP_CORKLINE_SHAPE_CODE |
SOAK_BEGIN_NET_TENSION_ID
NUMBER(6,0) |
Net tension at the beginning of the soak. references AMMOP_NETEND_TENSION_CODE |
SOAK_CORKLINE_SHAPE_CHANGES
VARCHAR2(6 BYTE) |
Number of cork line shape changes during soak. |
SOAK_END_CORKLINE_SHAPE_ID
NUMBER(6,0) |
Corkline shape at the end of the soak. references AMMOP_CORKLINE_SHAPE_CODE |
SOAK_TENSION_ADJUSTMENTS
VARCHAR2(6 BYTE) |
Number of corkline tension adjustments during soak. |
SOAK_TIMES_NET_RUN
VARCHAR2(6 BYTE) |
Number of times vessel ran length of net. |
TARGET_SPECIES_ID
NUMBER(6,0) |
Target species. references AGENCY_SPECIE |
TIDE_ID
NUMBER(6,0) |
Tide cycle at beginning of haul. references AMMOP_TIDE_CODE |
WATER_CLARITY
VARCHAR2(8 BYTE) |
Water clarity measurement in tenths of meters. |
WATER_TEMP
VARCHAR2(8 BYTE) |
Water temperature at the time of haul. Celsius |
SOAK_END_NET_TENSION_ID
NUMBER(6,0) |
Net tension at the end of the soak. references AMMOP_NETEND_TENSION_CODE |
Child Items
No Child Items for this record.
Contact Information
No contact information is available for this record.
Please contact the owner organization (AFSC) for inquiries on this record.
Item Identification
Title: | AMMOP_HAUL |
---|
Entity Information
Description: |
This table contains a list of hauls that occurred during an observers sample. |
---|
Data Attributes
Attribute Summary
![]() |
![]() |
Name | Type | Description |
---|---|---|---|---|
100
|
AIR_TEMP | VARCHAR2(8 BYTE) | Air temperature at the time of haul. Celsius | |
100
|
COMMENTS | VARCHAR2(2048 BYTE) | Additional information. | |
100
|
DISTANCE_OBSV_NET_MAXIMUM | VARCHAR2(6 BYTE) | Maximum distance between the observer vessel and the location of the fishing vessel where the net is hauled aboard for the duration of the haul, in whole meters. | |
100
|
DISTANCE_OBSV_NET_MINIMUM | VARCHAR2(6 BYTE) | Minimum distance between the observer vessel and the location of the fishing vessel where the net is hauled aboard for the duration of the haul, in whole meters. | |
100
|
DISTANCE_SHORE_MAXIMUM | VARCHAR2(6 BYTE) | Maximum net distance to shore in meters. | |
100
|
DISTANCE_SHORE_MINIMUM | VARCHAR2(6 BYTE) | Minimum net distance to shore in meters. | |
100
|
EVIDENCE_OF_BLOW_THROUGH | VARCHAR2(1 BYTE) | Any evidence of net blowthrough, Y=Yes, N=No. | |
100
|
GEAR_DAMAGE_CODE_ID | NUMBER(6,0) | Gear condition at end of haul. references AMMOP_GEAR_DAMAGE_CODE( | |
100
|
GEAR_DAMAGE_LOCATION_HOR_ID | NUMBER(6,0) | Horizontal location of gear damage after haul. references AMMOP_GEAR_DAMAGE_LH_CODE | |
100
|
GEAR_DAMAGE_LOCATION_VER_ID | NUMBER(6,0) | Vertical location of gear damage after haul. references AMMOP_GEAR_DAMAGE_LV_CODE | |
100
|
GEAR_DAMAGE_OBSTRUCTION_ID | NUMBER(6,0) | Gear obstructions at end of haul. references AMMOP_GEAR_DAMAGE_OBS_CODE | |
100
|
HAUL_BEGIN_DATE | DATE | Date haul began. | |
100
|
HAUL_BEGIN_DEPTH | VARCHAR2(6 BYTE) | Water depth, in whole fathoms, where haul began. | |
100
|
HAUL_BEGIN_DEPTH_FROM | VARCHAR2(1 BYTE) | How depth obtained, O=Observer, P=Permit Holder, C=Marine Chart. | |
100
|
HAUL_BEGIN_LATITUDE | VARCHAR2(9 BYTE) | Latitude location, in tenths of minutes (ddmm.m), where the haul began. | |
100
|
HAUL_BEGIN_LONGITUDE | VARCHAR2(9 BYTE) | Longitude location, in tenths of minutes (ddmm.m), where the haul began. | |
100
|
HAUL_BEGIN_TIME | VARCHAR2(4 BYTE) | Time haul began. Military time. | |
100
|
HAUL_END_DATE | DATE | Date haul ended. | |
100
|
HAUL_END_DEPTH | VARCHAR2(6 BYTE) | Water depth, in whole fathoms, where haul ended. | |
100
|
HAUL_END_DEPTH_FROM | VARCHAR2(1 BYTE) | How depth obtained, O=Observer, P=Permit Holder, C=Marine Chart. | |
100
|
HAUL_END_LATITUDE | VARCHAR2(9 BYTE) | Latitude location, in tenths of minutes (ddmm.m), where the haul ended. | |
100
|
HAUL_END_LONGITUDE | VARCHAR2(9 BYTE) | Longitude location, in tenths of minutes (ddmm.m), where the haul ended. | |
100
|
HAUL_END_TIME | VARCHAR2(4 BYTE) | Time haul ended. Military time. | |
100
|
HAUL_ID | NUMBER(6,0) | Human assigned haul number. | |
100
|
HYDRAULIC_PUMP_USED | VARCHAR2(1 BYTE) | Hydraulic pump used to clean net, Y=Yes,N=No. | |
100
|
ID | NUMBER(6,0) | Unique table ID value. Populated by AMMOP_HAUL_SEQ | |
100
|
INCIDENTAL_TAKE_OBSERVED | VARCHAR2(1 BYTE) | Incidental take observed, Y=Yes, N=No. | |
100
|
LAND_FEATURE_ID | NUMBER(6,0) | Best description of nearest land feature. references AMMOP_LAND_FEATURE_CODE | |
100
|
MARINE_ZONE_ID | NUMBER(6,0) | Best description of marine zone. references MM_FISHING_ZONE | |
100
|
NET_ID | NUMBER(6,0) | Reference to gear used in haul. | |
100
|
NET_VIEW_DISTANCE | VARCHAR2(8 BYTE) | Distance to net. meters | |
100
|
NET_VIEW_PERCENT_OBSTRUCTED | VARCHAR2(9 BYTE) | Percent view obstructed. | |
100
|
NET_VIEW_PERCENT_UNDERWATER | VARCHAR2(9 BYTE) | Percent net underwater when viewed. | |
100
|
NET_VIEW_RANK_CODE | VARCHAR2(6 BYTE) | Net view rank code. | |
100
|
OBSERVED_HAUL | VARCHAR2(1 BYTE) | Partially or Fully. | |
100
|
PERCENT_NET_HAULED | VARCHAR2(9 BYTE) | Percentage of net that was actually pulled out of the water to any degree during this haul. | |
100
|
PERCENT_NET_OBSERVED | VARCHAR2(9 BYTE) | Percentage of net that was actually observed being hauled during this haul. | |
100
|
PERCENT_TOTAL_NET_SET | VARCHAR2(9 BYTE) | Percentage of net set prior to haul. | |
100
|
RIVER_HEIGHT | VARCHAR2(6 BYTE) | River height of nearest large river. | |
100
|
SAMPLE_ID | VARCHAR2(10 BYTE) | Reference to sample haul is a part of. | |
100
|
SET_BEGIN_DATE | DATE | Date set began. | |
100
|
SET_BEGIN_DEPTH | VARCHAR2(6 BYTE) | Water depth, in whole fathoms, where set began. | |
100
|
SET_BEGIN_DEPTH_FROM | VARCHAR2(1 BYTE) | How depth obtained, O=Observer, P=Permit Holder, C=Marine Chart. | |
100
|
SET_BEGIN_LATITUDE | VARCHAR2(9 BYTE) | Latitude location, in tenths of minutes (dddmm.m), where the set began. | |
100
|
SET_BEGIN_LONGITUDE | VARCHAR2(9 BYTE) | Longitude location, in tenths of minutes (dddmm.m), where the set began. | |
100
|
SET_BEGIN_TIME | VARCHAR2(4 BYTE) | Time set began. Military time | |
100
|
SET_END_DATE | DATE | Date set ended. | |
100
|
SET_END_DEPTH | VARCHAR2(6 BYTE) | Water depth, in whole fathoms, where set ended. | |
100
|
SET_END_DEPTH_FROM | VARCHAR2(1 BYTE) | How depth obtained, O=Observer, P=Permit Holder, C=Marine Chart. | |
100
|
SET_END_LATITUDE | VARCHAR2(9 BYTE) | Latitude location, in tenths of minutes (ddmm.m), where the set ended. | |
100
|
SET_END_LONGITUDE | VARCHAR2(9 BYTE) | Longitude location, in tenths of minutes (ddmm.m), where the set ended. | |
100
|
SET_END_TIME | VARCHAR2(4 BYTE) | Time set ended. Military time. | |
100
|
SET_OBSERVED | VARCHAR2(1 BYTE) | Any part of set observed, Y=Yes, N=No. | |
100
|
SOAK_BEGIN_CORKLINE_SHAPE_ID | NUMBER(6,0) | Corkline shape at the beginning of the soak. references AMMOP_CORKLINE_SHAPE_CODE | |
100
|
SOAK_BEGIN_NET_TENSION_ID | NUMBER(6,0) | Net tension at the beginning of the soak. references AMMOP_NETEND_TENSION_CODE | |
100
|
SOAK_CORKLINE_SHAPE_CHANGES | VARCHAR2(6 BYTE) | Number of cork line shape changes during soak. | |
100
|
SOAK_END_CORKLINE_SHAPE_ID | NUMBER(6,0) | Corkline shape at the end of the soak. references AMMOP_CORKLINE_SHAPE_CODE | |
100
|
SOAK_TENSION_ADJUSTMENTS | VARCHAR2(6 BYTE) | Number of corkline tension adjustments during soak. | |
100
|
SOAK_TIMES_NET_RUN | VARCHAR2(6 BYTE) | Number of times vessel ran length of net. | |
100
|
TARGET_SPECIES_ID | NUMBER(6,0) | Target species. references AGENCY_SPECIE | |
100
|
TIDE_ID | NUMBER(6,0) | Tide cycle at beginning of haul. references AMMOP_TIDE_CODE | |
100
|
WATER_CLARITY | VARCHAR2(8 BYTE) | Water clarity measurement in tenths of meters. | |
100
|
WATER_TEMP | VARCHAR2(8 BYTE) | Water temperature at the time of haul. Celsius | |
100
|
SOAK_END_NET_TENSION_ID | NUMBER(6,0) | Net tension at the end of the soak. references AMMOP_NETEND_TENSION_CODE |
Attribute Details
AIR_TEMP
Data Storage Type: | VARCHAR2(8 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Air temperature at the time of haul. Celsius |
COMMENTS
Data Storage Type: | VARCHAR2(2048 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Additional information. |
DISTANCE_OBSV_NET_MAXIMUM
Data Storage Type: | VARCHAR2(6 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Maximum distance between the observer vessel and the location of the fishing vessel where the net is hauled aboard for the duration of the haul, in whole meters. |
DISTANCE_OBSV_NET_MINIMUM
Data Storage Type: | VARCHAR2(6 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Minimum distance between the observer vessel and the location of the fishing vessel where the net is hauled aboard for the duration of the haul, in whole meters. |
DISTANCE_SHORE_MAXIMUM
Data Storage Type: | VARCHAR2(6 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Maximum net distance to shore in meters. |
DISTANCE_SHORE_MINIMUM
Data Storage Type: | VARCHAR2(6 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Minimum net distance to shore in meters. |
EVIDENCE_OF_BLOW_THROUGH
Data Storage Type: | VARCHAR2(1 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Any evidence of net blowthrough, Y=Yes, N=No. |
GEAR_DAMAGE_CODE_ID
Data Storage Type: | NUMBER(6,0) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Gear condition at end of haul. references AMMOP_GEAR_DAMAGE_CODE( |
GEAR_DAMAGE_LOCATION_HOR_ID
Data Storage Type: | NUMBER(6,0) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Horizontal location of gear damage after haul. references AMMOP_GEAR_DAMAGE_LH_CODE |
GEAR_DAMAGE_LOCATION_VER_ID
Data Storage Type: | NUMBER(6,0) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Vertical location of gear damage after haul. references AMMOP_GEAR_DAMAGE_LV_CODE |
GEAR_DAMAGE_OBSTRUCTION_ID
Data Storage Type: | NUMBER(6,0) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Gear obstructions at end of haul. references AMMOP_GEAR_DAMAGE_OBS_CODE |
HAUL_BEGIN_DATE
Data Storage Type: | DATE |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Date haul began. |
HAUL_BEGIN_DEPTH
Data Storage Type: | VARCHAR2(6 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Water depth, in whole fathoms, where haul began. |
HAUL_BEGIN_DEPTH_FROM
Data Storage Type: | VARCHAR2(1 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
How depth obtained, O=Observer, P=Permit Holder, C=Marine Chart. |
HAUL_BEGIN_LATITUDE
Data Storage Type: | VARCHAR2(9 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Latitude location, in tenths of minutes (ddmm.m), where the haul began. |
HAUL_BEGIN_LONGITUDE
Data Storage Type: | VARCHAR2(9 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Longitude location, in tenths of minutes (ddmm.m), where the haul began. |
HAUL_BEGIN_TIME
Data Storage Type: | VARCHAR2(4 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Time haul began. Military time. |
HAUL_END_DATE
Data Storage Type: | DATE |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Date haul ended. |
HAUL_END_DEPTH
Data Storage Type: | VARCHAR2(6 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Water depth, in whole fathoms, where haul ended. |
HAUL_END_DEPTH_FROM
Data Storage Type: | VARCHAR2(1 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
How depth obtained, O=Observer, P=Permit Holder, C=Marine Chart. |
HAUL_END_LATITUDE
Data Storage Type: | VARCHAR2(9 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Latitude location, in tenths of minutes (ddmm.m), where the haul ended. |
HAUL_END_LONGITUDE
Data Storage Type: | VARCHAR2(9 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Longitude location, in tenths of minutes (ddmm.m), where the haul ended. |
HAUL_END_TIME
Data Storage Type: | VARCHAR2(4 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Time haul ended. Military time. |
HAUL_ID
Data Storage Type: | NUMBER(6,0) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Human assigned haul number. |
HYDRAULIC_PUMP_USED
Data Storage Type: | VARCHAR2(1 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Hydraulic pump used to clean net, Y=Yes,N=No. |
ID
Data Storage Type: | NUMBER(6,0) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Unique table ID value. Populated by AMMOP_HAUL_SEQ |
INCIDENTAL_TAKE_OBSERVED
Data Storage Type: | VARCHAR2(1 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Incidental take observed, Y=Yes, N=No. |
LAND_FEATURE_ID
Data Storage Type: | NUMBER(6,0) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Best description of nearest land feature. references AMMOP_LAND_FEATURE_CODE |
MARINE_ZONE_ID
Data Storage Type: | NUMBER(6,0) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Best description of marine zone. references MM_FISHING_ZONE |
NET_ID
Data Storage Type: | NUMBER(6,0) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Reference to gear used in haul. |
NET_VIEW_DISTANCE
Data Storage Type: | VARCHAR2(8 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Distance to net. meters |
NET_VIEW_PERCENT_OBSTRUCTED
Data Storage Type: | VARCHAR2(9 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Percent view obstructed. |
NET_VIEW_PERCENT_UNDERWATER
Data Storage Type: | VARCHAR2(9 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Percent net underwater when viewed. |
NET_VIEW_RANK_CODE
Data Storage Type: | VARCHAR2(6 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Net view rank code. |
OBSERVED_HAUL
Data Storage Type: | VARCHAR2(1 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Partially or Fully. |
PERCENT_NET_HAULED
Data Storage Type: | VARCHAR2(9 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Percentage of net that was actually pulled out of the water to any degree during this haul. |
PERCENT_NET_OBSERVED
Data Storage Type: | VARCHAR2(9 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Percentage of net that was actually observed being hauled during this haul. |
PERCENT_TOTAL_NET_SET
Data Storage Type: | VARCHAR2(9 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Percentage of net set prior to haul. |
RIVER_HEIGHT
Data Storage Type: | VARCHAR2(6 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
River height of nearest large river. |
SAMPLE_ID
Data Storage Type: | VARCHAR2(10 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Reference to sample haul is a part of. |
SET_BEGIN_DATE
Data Storage Type: | DATE |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Date set began. |
SET_BEGIN_DEPTH
Data Storage Type: | VARCHAR2(6 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Water depth, in whole fathoms, where set began. |
SET_BEGIN_DEPTH_FROM
Data Storage Type: | VARCHAR2(1 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
How depth obtained, O=Observer, P=Permit Holder, C=Marine Chart. |
SET_BEGIN_LATITUDE
Data Storage Type: | VARCHAR2(9 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Latitude location, in tenths of minutes (dddmm.m), where the set began. |
SET_BEGIN_LONGITUDE
Data Storage Type: | VARCHAR2(9 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Longitude location, in tenths of minutes (dddmm.m), where the set began. |
SET_BEGIN_TIME
Data Storage Type: | VARCHAR2(4 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Time set began. Military time |
SET_END_DATE
Data Storage Type: | DATE |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Date set ended. |
SET_END_DEPTH
Data Storage Type: | VARCHAR2(6 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Water depth, in whole fathoms, where set ended. |
SET_END_DEPTH_FROM
Data Storage Type: | VARCHAR2(1 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
How depth obtained, O=Observer, P=Permit Holder, C=Marine Chart. |
SET_END_LATITUDE
Data Storage Type: | VARCHAR2(9 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Latitude location, in tenths of minutes (ddmm.m), where the set ended. |
SET_END_LONGITUDE
Data Storage Type: | VARCHAR2(9 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Longitude location, in tenths of minutes (ddmm.m), where the set ended. |
SET_END_TIME
Data Storage Type: | VARCHAR2(4 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Time set ended. Military time. |
SET_OBSERVED
Data Storage Type: | VARCHAR2(1 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Any part of set observed, Y=Yes, N=No. |
SOAK_BEGIN_CORKLINE_SHAPE_ID
Data Storage Type: | NUMBER(6,0) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Corkline shape at the beginning of the soak. references AMMOP_CORKLINE_SHAPE_CODE |
SOAK_BEGIN_NET_TENSION_ID
Data Storage Type: | NUMBER(6,0) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Net tension at the beginning of the soak. references AMMOP_NETEND_TENSION_CODE |
SOAK_CORKLINE_SHAPE_CHANGES
Data Storage Type: | VARCHAR2(6 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Number of cork line shape changes during soak. |
SOAK_END_CORKLINE_SHAPE_ID
Data Storage Type: | NUMBER(6,0) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Corkline shape at the end of the soak. references AMMOP_CORKLINE_SHAPE_CODE |
SOAK_TENSION_ADJUSTMENTS
Data Storage Type: | VARCHAR2(6 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Number of corkline tension adjustments during soak. |
SOAK_TIMES_NET_RUN
Data Storage Type: | VARCHAR2(6 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Number of times vessel ran length of net. |
TARGET_SPECIES_ID
Data Storage Type: | NUMBER(6,0) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Target species. references AGENCY_SPECIE |
TIDE_ID
Data Storage Type: | NUMBER(6,0) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Tide cycle at beginning of haul. references AMMOP_TIDE_CODE |
WATER_CLARITY
Data Storage Type: | VARCHAR2(8 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Water clarity measurement in tenths of meters. |
WATER_TEMP
Data Storage Type: | VARCHAR2(8 BYTE) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Water temperature at the time of haul. Celsius |
SOAK_END_NET_TENSION_ID
Data Storage Type: | NUMBER(6,0) |
---|---|
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Net tension at the end of the soak. references AMMOP_NETEND_TENSION_CODE |
Catalog Details
Catalog Item ID: | 75080 |
---|---|
GUID: | gov.noaa.nmfs.inport:75080 |
Metadata Record Created By: | Rachel Wuest |
Metadata Record Created: | 2025-03-05 17:46+0000 |
Metadata Record Last Modified By: | Daniel Woodrich |
Metadata Record Last Modified: | 2025-05-21 19:12+0000 |
Metadata Record Published: | 2025-05-21 |
Owner Org: | AFSC |
Metadata Publication Status: | Published Externally |
Do Not Publish?: | N |
Metadata Review Frequency: | 1 Year |